The problem is the water line is pretty steady at just the wrong level to
work in beneath the wall. It doesn't help to move the wall further back,
because this natural spring fed lake is in a shallow basin it tends to
spread out as you move the wall.
Our neighbor built one with wood by driving 2 X 10 pressure treated wood
vertically into the sand about 18 inches side by side for about 80 feet.
This was very laborious, but is more effective than our concrete wall.
I was hoping that someone might know of a kit or another material that would
be less laborious, but more effective than our concrete wall.
If you have any suggestions, or know of any materials or products I should
investigate, please e-mail me at
mailto:sco...@alacare.com
Please note: The e-mail reply for this message has spaces in it to stop all
the spam.
Your pressure treated timber is about the best you are going to find on the
market. Although it may be costly and labor extensive, it is long lasting.
I do not know of any kit available on the market for a quick and easy and
cheap fix. I've been in the industry for over three decades and have always
found it is better to take pains than short cut. It is cheaper in the long
run.
Timber planks would be less labourious than this option, though, wouldn't
it? I do wonder about the effect of the preservatives on the lake water
though.
.
Have build many of these walls. Just remember to hire someone who is
certified to do such a task. There is much prep work involved.
Vito <val...@erols.com> wrote in message
news:377BE2A1...@erols.com...
> try useing bubble gum