LED Third Brake Light

[EJ]

I make this 10 LED Third Brake Light that operates on 6 or 12 Volts.
The light has been designed to flash to get the attention of following
drivers, and then after a few seconds it goes to a steady on. The
lights also use a dc plug and jack to make them easily attachable and
removable.

This light is intended to be mounted on the inside of the rear
window.
http://www.brakeflasher.com/brake.htm

If you desire to have a light that mounts externally, I make this
light as well:
http://www.brakeflasher.com/brake_al.htm

Please let me know if you have any questions.

Thanks,

EJ

[Bill Noble]

be sure to check the law in your state before adding a flashing lamp

"EJ" <scif...@gmail.com> wrote in message
news:fdb59b11-84eb-4cd3...@h25g2000vba.googlegroups.com...

[EJ]

On Oct 10, 1:28 am, "Bill Noble" <nob...@nowhere.invalid> wrote:
> be sure to check the law in your state before adding a flashing lamp
>

> "EJ" <scifu...@gmail.com> wrote in message

>
> news:fdb59b11-84eb-4cd3...@h25g2000vba.googlegroups.com...
>
>
>
> > I make this 10 LED Third Brake Light that operates on 6 or 12 Volts.
> > The light has been designed to flash to get the attention of following
> > drivers, and then after a few seconds it goes to a steady on. The
> > lights also use a dc plug and jack to make them easily attachable and
> > removable.
>
> > This light is intended to be mounted on the inside of the rear
> > window.
> >http://www.brakeflasher.com/brake.htm
>
> > If you desire to have a light that mounts externally, I make this
> > light as well:
> >http://www.brakeflasher.com/brake_al.htm
>
> > Please let me know if you have any questions.
>
> > Thanks,
>

> > EJ- Hide quoted text -
>
> - Show quoted text -

Just wanted to clarify that these lights do not flash continuously.
They only flash when power is first applied for a couple of seconds,
or what you adjust it too, and then remain on steadily.

For example, say you are approaching a red light, when you apply your
brakes, the light will flash for a couple of seconds, and then as you
wait at the traffic light with your foot on the brake, it will remain
on steadily.

The flashing cycle repeats the next time you apply the brakes.
However, if you don't desire the flashing at all, the light can be
ordered without it.