Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
replacing wheel studs - also anti-sieze question
16 views
Skip to first unread message
B
Aug 20, 2012, 3:40:14 PM8/20/12
to
'87 944 na
can the wheel studs be replaced easily during a rotor replacement?
i.e. does the hub or bearings need to be disassembled or simply removed?
and I know this next question generates lots of debate, but what would be a good substitute for Optimoly HT, and how is the torque force affected by this?
-Bryan
can the wheel studs be replaced easily during a rotor replacement?
i.e. does the hub or bearings need to be disassembled or simply removed?
and I know this next question generates lots of debate, but what would be a good substitute for Optimoly HT, and how is the torque force affected by this?
-Bryan
Bill
Aug 24, 2012, 1:36:44 AM8/24/12
to
new rotor, install hub and put everything back - regrease bearings and
don't over tighten.
wheel studs can be replaced easily, just press them out.
I use the anti-seize that is aluminum and grease based that comes in a
small tube. never had anything seize.
0 new messages