Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
95 Rodeo disabling alarm
10 views
Skip to first unread message
jska...@mac.com
May 13, 2015, 1:30:42 PM5/13/15
to
My alarm sat unused and silent for 10 years. One day when battery connection came loose I re-tightened it and alarm went off. None of the know tricks to turn it off worked and there does not seem to be a valet switch anywhere. I have the original manual for the factory alarm and no valet switch is mentioned.
First step was of course to pull fuse on horn. By connecting battery and within seconds and putting the key in ignition it would start but alarm would trip. I searched for a power window fuse since that worked for someone else but none in fuse box's. Even pulled every fuse one by one and no luck.
I could hear a relay clicking under the dash on the left side. I removed the plastic panel in front of drivers door and under dash. Eventually I found offending relay and there was a fuse on the end of two wires next to it. Pulled fuse and cured problem. No alarm and no electric locks. I can live with that.
First step was of course to pull fuse on horn. By connecting battery and within seconds and putting the key in ignition it would start but alarm would trip. I searched for a power window fuse since that worked for someone else but none in fuse box's. Even pulled every fuse one by one and no luck.
I could hear a relay clicking under the dash on the left side. I removed the plastic panel in front of drivers door and under dash. Eventually I found offending relay and there was a fuse on the end of two wires next to it. Pulled fuse and cured problem. No alarm and no electric locks. I can live with that.
0 new messages