I recommend another mechanic, I don't see how your head gasket could
possibly leak oil.
Now your valve cover gasket is a possibility, but using thicker oil won't
make much difference.
Ask your mechanic why he thinks it's the head gasket.
A bad head gasket almost always leaks coolant, not oil.
Find exactly what the dripping material is; oil, coolant,
trans fluid, PS fluid, washer fluid, AC condensation,...?
If it is oil, it could come from a valve cover seal, a crankshaft
seal, a timing cover seal, an oil filler tube joint, a drip from
topping off the oil carelessly, etc..
Get underneath and look up to see where it's coming from.
If you can't get under the car, open the hood and tighten
the valve cover screws. If that doesn't stop the leak, post
again, describing exactly where under the car the leak spot
appears. Someone here may offer a better guess as to the
source of the leak.
No additive or heavier oil will help.
Good luck.
Rodan.
2. So the additives are a scam your are saying?
Get some on your finger and smell it. You can tell the difference between
engine oil, coolant, brake fluid, etc.
Stop leak additives may work, but they dont fix the problem. They are a
bandaid approach, at best.
Saturns around that time had some known problems with oil leaks. I believe
it
was only valve cover gaskets, which is normally not a hard item to replace
and
not so expensive. Be aware that there is a big difference between head
gaskets
and valve cover gaskets.
SIL has one of them and he told me about the leak issues years ago. His
Saturn
is still turning, and has heavy mileage.
Not necessarily. The old types used solvents to swell the gaskets and
soften
them a bit. It also damaged them somewhat.
Some of the newer products contain polymers which do not attack the
elastomers,
nor do they form sludge. I believe these are safer to use and more
effective
than the old types (but I have no proof of that).
>Two things, one how can i tell which kind of oil it is, since there is
>so little on the drive way. I am pretty sure it is engine oil, since
>I have to top it up once a month or month and a half.
Take a clean piece of cardboard, put that under the car when you park
it. Mark where it is in relation to the car/engine, so you can
determine where the drip is coming from. Then take a drop of the
engine oil (dipstick) and drop that on the cardboard near the spot,
does it match? Try with ATF as well. And PS fluid.
>
>2. So the additives are a scam your are saying?
Pleae don't put words into other people's mouths. I doubt anyone said
that, just that an additive was not the solution to your problem.
I don;t think so as long as you don't keep dumping it in and
change oil when it is time to. It does not last though
and it there are limits to what it can do. More treatment
does not do much after a month or two.
> Two things, one how can i tell which kind of oil it is, since there is
> so little on the drive way. I am pretty sure it is engine oil, since
> I have to top it up once a month or month and a half.
Every fluid has its own unique smell, color and texture. Compare what is
being left behind to the fluids in your car and you'll have a pretty good
idea. The position of a leak can also have meaning, as others have pointed
out.
> 2. So the additives are a scam your are saying?
I wouldn't say that. I've seen them work in some cases and heard good things
about them from people whose experiences I would trust. And the man behind
Lucas products does seem to believe that his products work. (Trust me, I've
got that on very good authority. And no, I don't have any interest in the
company, am not employed by or for them, nor do I have any affiliation with
them.)
The problem is that while they may help for a while, and are certainly cheap
enough to try, additives and stop-leaks are not miracle soluitions.
Sometimes a problem is just too big or a seal too far gone to be "fixed" by
these products. And other times they work fine until something of a much
more serious nature goes wrong with the vehicle in question.
It's cheap enough to try an additive or leak stopper if you want to do so,
and there's very little possibility for harm. You will know fairly quickly
as to whether or not it worked to solve the problem, after you've identified
what fluid is leaking from your car. If the first introduction of a
leak-stopper or additive does not solve the problem, it really does mean
that you will have to get the problem fixed properly by replacing the
leaking part or seal.
William