The Watchmaker Activation Unlock Code And Serial

[Bulah Amber]

To check the warranty status of your watch, you need to perform the following steps:
1. Go to section «My Account»
2. Press the button «Create Account» and fill in all fields.
3. Go to the section «My Clock» and choose the item «Add Clock».
4. Enter the serial number of your watch.
5. Choose the type of guarantee - if you have been given a white guarantee card - choose the item «physical guarantee», if you have been given a black guarantee card (it is not obligatory, on it only QR code with a reference to the section «my watch») - choose an electronic guarantee.
6. Under the image of the clock you have to choose «international guarantee» - there will be specified date of purchase and term of warranty service for your hours (2 or 3 years depending on the version of mechanism).


The Watchmaker Activation Unlock Code And Serial
Download File https://tinurli.com/2wHVT8



To unlock this watch face for just $2.99: https:\/\/www.paypal.me\/yp12345\/2.99usd (IMPORTANT: Please attach the serial number for generating the unlock code), Please mention the \"Serial Number\" read in the first line in the setting page and an unlock code will be sent in order to activate it. The unlock code works on the whole life in your watch and still works after upgrade.How to get the serial number: Please open the connectiq and on your phone and find the watchface, open the setting and the first line is the unlock code. Thanks!A simplicity and richness watchface to show the analog time with second always on. It has Clear and clean watch face with always on second hand in efficient way, meanwhile it show rich info with rich configurations it support on-device setting on new device. On some devices it support on-device setting.simplicity and richness watchface is highly configurable, PRO functions(Configuraion with PRO) could be tried for a hour and it would be rolled back to the default values. There are more than 10 configurable fields:1) Plenty of face style and some are available in PRO mode: * Luminous Bar * Simplicity * Pencil(Pro) * Army(Pro) * Sword(Pro) * Diamond(Pro) * Diamond(Pro) * WhiteBar(Pro) * Fenix6 style(Pro) * Fenix6 style2(Pro)2) Second hand options: * Always on: As most watchface act; * On when it's worn(Default): Turn off the second hand to save battery when you are sleep; * On when lift the wrist: Act as the old watch which don't support always-on second hand; * Always off(to be developed): Extremely battery saving mode;3) sunrise\/sunset time: show the next sunrise\/sunset timeTo enable the sunrise\/sunset calculations and the weather, you need to lock the GPS location after installing this face. Just go to any activity that uses GPS and wait until 'GPS ready' appears, then exit the activity. Note that you will need to repeat this after changing your location, otherwise the displayed information will reflect your last location.4) 2nd time zone: The 2nd time zone: if it's in [-11, 11] we open the 2nd timezone, or it's disabled.5) 3:00 o'clock: Show the date and weekday: Now support English and Chinese;6) 6:00 o'clock: Show the steps: *disabled *icon with steps7) 9:00 o'clock: Show The heartrate: * disabled * Update every 1 minute. * Real time heart rate: Update every 1 second(Pro).8) 12:00 o'clock: Show the analog battery status: * disabled; * show analog battery volume; * show digital battery volume along with analog battery;9) Info below 12:00(Pro): * disabled; * user defined string; * weather: 1) it will be dimmer when it's out of date and you need to lift the wrist to update it with GPS\/BLE connected; 2) You need to get the GPS and phone connected before getting the weather; 3) You need to get the GPS once again once you change your location; - Altitude; - If bluetooth is connected; - ambient pressure. - GPS info. - Floors climbed (if avalibale) - Steps\/steps goal - Notification\/Alarm count; - Distance - Kcal - Active minute (if avalibale) ...10) Graph above 6:00(Pro): * Heart Rate history; * Colorful Heart Rate history; * Step history;11) background(not available on fenix6\/fenix6xpro): * black * white(To be developed) * newspaper style. We can present many useful info on the newspaper background. DATA AVALIABLE in background info: - Notification\/Alarm count; - Altitude; - If bluetooth is connected; - ambient pressure. - GPS info. - Floors climbed (if avalibale) - Steps\/steps goal - Distance - Kcal - Active minute (if avalibale)"; var appDescriptionMoreLabel = "More"; 中文版： -US/apps/c5a22e08-e5af-4e8c-87fd-7573389b32f7To unlock this watch face for just $2.99: (IMPORTANT: Please attach the serial number for generating the unlock code), Please mention the "Serial Number" read in the first line in the setting page and an unlock code will be sent in order to activate it. The unlock code works on the whole life in your watch and still works after upgrade.

Those users who wish to have continued access to the advanced features (the"Pro" version) after 60 days, or those who will be using Watch-O-Scope in acommercial endeavour (for example, a professional watchmaker) mustpurchase an activation key for the Pro version.

Example: if task A uses action Perform Task to start task B, then when task A is run by pressingthe Play button in the task edit screen, %caller1 in task B will show task=A, %caller2 will show ui.The format of each entry in the array is callertype(=callername(:subcallername))Caller types ares detailed below:profile
a profile (when it's state changes). callername is either enter or exit depending on whether the profileactivated or deactivated. subcallername is the name of the profile, if it has one, otherwise anonscene
a scene event, with callername being the scene name. For element events, subcallername is the element name. For action bar button presses, subcallername is the label if one was given. For scene-global events (e.g. Key), subcallername is event type ui
the Play button in the task edit screen in the Tasker UIlaunch
clicking a child application icon in the launchernbutton
a notification action button, either from Tasker's permanent notification or one created with one of the Notify actions.callername specifies the label of the button if present.external
an external applicationqstile
a Quick Settings tile. callername specifies the label of the tile.appshort
an app shortcut (accessed via long-click on the Tasker icon). callername specifies the label of the tile.task
another task, from a Perform Task action. subcallername is the task name, if it has one, otherwise anonpowermenu
the power menu on Android 11+.Global Built-In VariablesAirplane Mode Status(dynamic)
%AIR
Whether Airplane Mode is on or offAirplane Radios
%AIRR
A comma-separated list of the radios which will be disabled when entering Airplane Mode.
Common radio names are: bluetooth, cell, nfc, wifi, wimax.Battery Level
%BATT
Current device battery level from 0-100.Bluetooth Status (dynamic)
%BLUE
Whether Bluetooth is on or in some other state (off).
Calendar List
%CALS
Newline-separated list of calendars available on the device.
Each entry is in the format calendarprovider:calendarname.
Example usage:Variable Set, %newline,
Variable Split, %CALS, %newlineFlash, %CALS(#) calendars, first one is %CALS(1)For the sign
, press carriage-return on the keyboard.Calendar Event Title / Descr / Location%CALTITLE / %CALDESCR / %CALLOC
The title, description and location of the current calendar event, if there is one. If there are multiple current calendar events thevariables refer to the shortest.
Tip: find other details about the current event(s) using the Misc / Test action, specifying %TIMES for the data.Call Name / Number/ Date / Time (In) (dynamic, monitored)
%CNAME / %CNUM / %CDATE / %CTIME
The caller name, number, date and time of the current (if a call is in progress) or last call received.
Caller number is 0 if it's unknown.
Caller name is ? if it's unknown (probably because the caller number was blocked)and set to the caller number if the contact couldn't be looked up.It's unavailable on Android versions prior to 2.0.Call Name / Number/ Date / Time / Duration (Out)(dynamic, monitored)
%CONAME / %CONUM / %CODATE / %COTIME / %CODUR
The called name, number, date and time of the last (not the current) outgoing call made.
Called Nameis set to the called number if the contact couldn't be looked up.It's unavailable on Android versions prior to 2.0.Cell ID (monitored,dynamic)
%CELLID
The current cell tower ID if known.
If you are using a Cell Near state, note that sometimes the Cell Near state will stay activeeven though %CELLID reports that the tower ID is unknown or invalid; that is because Cell Near onlyresponds to valid IDs to prevent the state becoming inactive e.g. due to a service interruption.
For backwards compatibility, UMTS cells are reported with a GSM prefix.
From Android 4.2, Tasker version 4.3+, cells could be found from 2 different network types simultaneously. In that case, the value is reported with preference for the network type leftmost on the list: GSM, CDMA, UMTS, LTE.Cell Signal Strength (monitored,dynamic)
%CELLSIG
The current phone signal level from 0-8 inclusive on a rougly linear scale. On some phones, the level will rise in steps of 2 (0,2,4,6,8). The value is -1 if the valueis unknown or there is e.g. no service.
From Android 4.2, Tasker version 4.3+, cells could be found from 2 different network types simultaneously. In that case, the value is reported with preference for the network type leftmost on the list: GSM, CDMA, UMTS, LTE.
There is a bug with some Android versions that the reported signal strength is not updated until the device is turned off and on.Cell Service State (monitored,dynamic)
%CELLSRV
The current phone service state. One of unknown, service, noservice, emergency, nopower.Clipboard Contents(monitored,dynamic)%CLIP
The current contents of the system clipboard. Please note that the clipboard can't be accessed while the device's screen is securely locked.CPU Frequency
%CPUFREQ
The current frequency CPU 0 is running at. See also: CPU Control.CPU Governor
%CPUGOV
The current governor controlling the frequency of CPU 0. See also: CPU Control.Date
%DATE
Current human-readable date.Day of the Month
%DAYM
Current Day of the Month, starting at 1.Day of the Week
%DAYW
Current Day of the Week starting with Sunday.Device ID / Manufacturer / Model / Product
%DEVID / %DEVMAN / %DEVMOD / %DEVPROD
The ID, manufacturer, model and product name of the device.
Note: ID is not a uniqueidentifier for the device, but rather for the hardware of the device. See also: %DEVTID.Device Telephony ID
%DEVTID
Returns the unique telephony-based ID for the device (e.g. for GSM the IMEI, for CDMA theMEID or ESN).
Not available on all devices.Display Brightness%BRIGHT
Current screen brightness, 0-255. On some devices, if the Android setting Auto Brightness is enabled, thevalue will always be 255.Display Timeout%DTOUT
Current system screen timeout (seconds).Email From / Cc / Subject / Date / Time (dynamic)
%EFROM / %ECC / %ESUBJ / %EDATE / %ETIME
The From, Cc, Subject, Received Date and Received Time of the last email receivedby the K9 email agent.Free Memory
%MEMF
System free memory remaining in MB.GPS Status
(monitored,dynamic Gingerbread+)%GPS
Whether the system GPS receiver is on or off.Heart Rate (monitored,dynamic)
%HEART
The current detected heart rate in beats per minute.
See also: state Heart Rate.
The value will be negative for no contact (-1), accuracy unreliable (-2) or some other problem (-3)HTTP Response Code / Data / Content Length(dynamic)%HTTPR / %HTTPD / %HTTPL
Values from the last HTTP POST/GET action.
If the server doesn't return a content length, %HTTPL will be calculated from the returneddata where possible.Humidity (monitored,dynamic)
%HUMIDITY
The relative ambient air humidity in percent.
See also: state Humidity.Input Method
%IMETHOD
The current active input method. Consists of 4 parts separated by commas: Method Name, SubType Name, Mode, Locale.
To access particular parts, use the Variable Split action.Interrupt Mode (dynamic)
%INTERRUPT
Only available on Android 5.0+, requires Tasker's notification access service to be enabled, see Android'sSound & Notification settings.

Android 5.0+: the current state of interruptions mode on the device: none, priority or all
See Also: action Interrupt Mode

Android 6.0+: the current state of Do Not Disturb mode on the device: none, priority, all or alarms
See Also: action Do Not DisturbKeyguard Status
%KEYG
Whether the Keyguard is on or offLast Application
%LAPP
The name of the application that was in the foreground before the current one e.g. Maps.Last Photo
%FOTO
The filesystem path to the last photo taken by Tasker or thestandard system camera application.Light Level (monitored,dynamic)
%LIGHT
The last recorded light level in lux.
Note that Android does not return a value until the lightlevel changes, so to test the sensor is working you should put it near a bright light initially.
May not change when the device display is off, see Menu / Prefs / More / Display Off Monitoring / Light Sensor.Location (dynamic)
%LOC
The latitude and longitude of the last GPS fix.
See note.Location Accuracy (dynamic)
%LOCACC
The accuracy in metres of the last GPS fix.
See note.Location Altitude (dynamic)
%LOCALT
The altitude in metres of the last GPS fix, or 0 if unavailable.
See note.Location Speed (dynamic)
%LOCSPD
The speed in metres/second at the last GPS position fix or 0 if unavailable.
See note.Location Fix Time Seconds (dynamic)
%LOCTMS
The time in seconds of the last GPS fix. To get age of fix, take this away from %TIMES.
This value is not set until an offset of the GPS time from the fixed time hasbeen calculated (should be after the first GPS fix) because the value is meaninglessuntil that point.
See note.Location (Net) (dynamic)
%LOCN
The latitude and longitude of the last network location fix.
See note.Location Accuracy (Net) (dynamic)
%LOCNACC
The accuracy in metres of the last network location fix.
See note.Location Fix Time (Net) (dynamic)
%LOCNTMS
The time in seconds of the last net location fix. To get age of fix, take this away from %TIMES.
See note.Magnetic Field Strength (monitored,dynamic)
%MFIELD
The total magnitudes in micro-Teslas of the magnetic fields acting on all three axis of the devices sensor.
Updated once per second.
See Also: state Magnetic Field.Music Track (monitored,dynamic)
%MTRACK
The current playing music track, supported for:Tasker actions Music Play and Music Play DirBuilt-in Android music-player, probably not on all devices howeverPower AMPBeyondPod (Tasker v1.2.1+)Phantom Music Control ProMedia UtilitiesPriority: if both Tasker and one of the other supported apps are playing simultaneously, thenon-Tasker track will be shown. If more than one of the other supported apps is playing simultaneuosly, behaviour is unspecified.
Notes: if you don't have a supported player, you could try Phantom Music Control Pro or Media Utilities, which support a lot ofplayers and should pass the info on to Taskerpausing a track clears the variable, unpausing sets it againyour music player may need an option enabled in order to broadcast the track information, or the broadcast may only be available in a 'pro' versionMuted
%MUTED
Whether the microphone is currently muted (on) or not (off).Night Mode
%NIGHT
The current Android Night Mode.
One of on, off or auto.
If auto, Android will decide whether it should be in Night Mode itself.Notification Title (monitored, dynamic)
%NTITLE
The title of the last notification shown in the status bar. Prior to KitKat, requires Tasker's accessibility serverto be running (see Android Accessibility Settings). From KitKat, requires Tasker's Notification Listener serviceto be running instead.
In a task running as a result of a Notification or Notification Removed event, use variable %evtprm2 insteadof %NTITLE. This is much more reliable and you have access to other parts of the notification (%evtprm3 etc)
Notifications generated by Tasker are not shown.Phone Number
%PNUM
The current phone number of the device, if it's in service.
On some phones it doesn't work (Android limitation), seems related to the type of SIM.Pressure (monitored,dynamic)
%PRESSURE
The current air pressure on the device in millibars.
May not change when the device display is off, see Menu / Prefs / Monitor / Display Off Monitoring / Pressure Sensor.Profiles Active (dynamic)
%PACTIVE
A comma-separated list of the currently active, named profiles in activation order. Duplicatenames will appear on the list only once. The list always starts and ends with a comma to make matching easier, if it's not empty.Profiles Enabled (dynamic)
%PENABLED
A comma-separated list of the currently enabled, named profiles in creation order. Duplicatenames will appear on the list only once. The list always starts and ends with a comma to make matching easier, if it's not empty.Roaming
%ROAM
on if device is roaming on the current telephone network, otherwise off.Root Available
%ROOT
yes if root functions are available on this device, otherwise no.Screen (dynamic)
%SCREEN
Whether the screen is on (value on) or off (value off).SDK Version
%SDK
The numeric Android SDK versionof the device.Silent Mode (dynamic)
%SILENT
The current state of silent mode: off, vibrate or on.
From Android 5.0+ this variable is intended to only reflect whether the deviceis in vibrate mode (vibrate) or not (any other value), but the on value is included for backwardscompatibility and set when the device is not in vibrate mode and the interrupt mode is noneor priority.
See Also: variable %INTERRUPT, actions Silent Mode and Interrupt Mode.SIM Serial Number
%SIMNUM
The serial number of the SIM card, if one is present and accessible.
If the SIM has not been unlocked it will not be available.SIM State
%SIMSTATE
The current state of the SIM card.
One of unknown, absent, pinrequired, pukrequired, netlocked or ready.Speakerphone
%SPHONE
Whether the speakerphone is on or offSpeech (dynamic)
%SPEECH
The current utterance as a result of a Say or Say File action, if applicable.Tasks Running (dynamic)
%TRUN
A comma-separated list of any named tasks which are currently running. The list always starts and ends with a comma to make matching easier, if it's not empty.Telephone Network (dynamic, monitored)
%TNET
The current telephony network operator the device is using.
May be unreliable on CDMA networksTemperature (monitored,dynamic)
%TEMP
The current ambient temperature in degrees Celsius.
May not change when the device display is off, see Menu / Prefs / Monitor / Display Off Monitoring / Temp. Sensor.
See also: state Temperature.Text From/Date/Subject/Time (monitored)
%SMSRF / %SMSRN / %SMSRB / %MMSRS / %SMSRD / %SMSRT
The sender address, name, body, subject, date and time of the last text (SMS or MMS) received.
These variables will be empty until the first time a text is received afterthey have been referenced because Tasker does not monitor texts unless it's needed.
Name is set to sender address of no contact could be looked up.It's unavailable on Android versions prior to 2.0.
Body (%SMSRB) is only set for SMSs.
Subject (%MMSRS) is only set for MMSs.Time
%TIME
Current human-readable time separated by a period e.g. 10.59Tether (dynamic)
%TETHER
A comma-separated list of enabled tethering forms i.e. connections over which another device can connect to thisone in order to use its internet connection.
The possible forms are wifi, usb or bt.
BT will only be present when an actual client is connected via BT for using the devices network connection, whereasthe others will be present as soon as the functionality is enabled (Android bug/limitation).Time MilliSeconds
%TIMEMS
The current time in milliseconds.
(milliseconds since some time in January, 1970, if you must know).Time Seconds
%TIMES
The current time in seconds.
(seconds since some time in January, 1970, if you must know).UI Mode (monitored,dynamic)
%UIMODE
The current Android UI mode.
One of car, desk, appliance, tv (television), watch, undef (undefined) or normal.Uptime Seconds
%UPS
The number of seconds since the device last booted.Volume - Alarm/Call/DTMF/Media/Notification/Ringer/System (dynamic)
%VOLA / %VOLC / %VOLD / %VOLM / %VOLN / %VOLR / %VOLS
Current audio channel volume level.
On some devices, volume changes are not picked up dynamically, on others notwhen using the phone app.WiFi Info
%WIFII
When connected to an Access Point (AP), shows human-readable data about the AP. When not connected,show details of the most recent Wifi scan results for nearby APs.
On Android 8.1+, may require basic location services to be enabled in Android settings.
WiFi Status (dynamic)
%WIFI
Whether WiFi is on or off.Note: if WiFi is enabling or disabled, in fact anything but enabled, it's classed as off.Wimax Status
%WIMAX
Whether Wimax is on or off.Note: if Wimax is enabling or disabled, in fact anything but enabled, it's classed as off.Window Label (monitored,dynamic)
%WIN
The label of the current window, which could be a full-screen activity or a dialog.
Not set if the label is unknown.
For some windows, the label might be that of the first item in the window e.g. a menu entry or even a button.General NotesVariables marked dynamic in the list above trigger changes in Variable Value statesand Variable Set events whenever their value changes.


eebf2c3492