Zetec 2.0l valve lifter part numbers

Mark Olson

unread,

Mar 18, 2003, 10:00:20 AM3/18/03

to

For anyone who is wondering what the part numbers are for the solid
valve lifters (the ones that don't use shims) for the 2.0l VIN 3
Zetec in your Focus. I typed them in by hand and checked them over,
but I may have made a mistake or two, so use them at your own risk.

YS4Z-6500-DAD SELECT-FIT 17.145MM THICK
YS4Z-6500-EA SELECT-FIT 17.175MM THICK
YS4Z-6500-EAB SELECT-FIT 17.205MM THICK
YS4Z-6500-EAC SELECT-FIT 17.235MM THICK
YS4Z-6500-EAD SELECT-FIT 17.265MM THICK
YS4Z-6500-FA SELECT-FIT 17.295MM THICK
YS4Z-6500-FAB SELECT-FIT 17.325MM THICK
YS4Z-6500-FAC SELECT-FIT 17.355MM THICK
YS4Z-6500-FAD SELECT-FIT 17.385MM THICK
YS4Z-6500-GA SELECT-FIT 17.415MM THICK
YS4Z-6500-GAB SELECT-FIT 17.445MM THICK
YS4Z-6500-GAC SELECT-FIT 17.475MM THICK
YS4Z-6500-GAD SELECT-FIT 17.505MM THICK
YS4Z-6500-HA SELECT-FIT 17.535MM THICK
YS4Z-6500-HAB SELECT-FIT 17.565MM THICK
YS4Z-6500-HAC SELECT-FIT 17.595MM THICK
YS4Z-6500-HAD SELECT-FIT 17.625MM THICK
YS4Z-6500-JA SELECT-FIT 17.655MM THICK

HTH,
Mark

Jan Oliver Arndt

unread,

Mar 19, 2003, 11:27:48 AM3/19/03

to

for what purpose?

Ollie
"Mark Olson" <ols...@tiny.invalid> schrieb im Newsbeitrag
news:3E773484...@ieee.org...

Mark Olson

unread,

Mar 18, 2003, 11:45:29 AM3/18/03

to

> for what purpose?

When you adjust the valve lash, you have to figure out which lifters
you will need to set the clearance to the desired value. If you
know the part number, you can phone your Ford dealer and quickly
and accurately ascertain if they have the correct lifters in stock.
Having the part number will also enable you to order the correct
lifters via email - none of the online parts sources I searched
through returned any part numbers for these lifters.

I have found that trying to exchange detailed information over the
phone is problematic at best, so if you supply the part number and
the parts counter clerk reads back the size you have some assurance
that they have looked up the correct one.

Does that help?
Mark

Tim..

unread,

Mar 18, 2003, 2:10:34 PM3/18/03

to

"Mark Olson" <ols...@tiny.invalid> wrote in message
news:3E773484...@ieee.org...

I presume these are the same for the 1.8 litre unit also?

Tim..

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.462 / Virus Database: 261 - Release Date: 13/03/2003

slute...@gmail.com

unread,

Mar 23, 2014, 4:01:49 AM3/23/14

to

Good day quick question, I'm seeing different numbers inside the lifters, they match the sizes shown with the part numbers you have listed here... what I wanna know is can I get one size for all or do I have to get the exact part numbers as listed?

leafydi...@gmail.com

unread,

Dec 31, 2014, 10:13:02 AM12/31/14

to

Hi mark. This is mega old, and a stretch but are there shorter options that the DAD PN? The machine shop cut my valve seats a bit deep and/or my valve stems are a little long.

frannio...@gmail.com

unread,

Jun 4, 2018, 11:07:42 PM6/4/18

to

What is the stock numbers