Holly side scoop
Hanko
I saw the used holley side scoop going for $65 on ebay. I was wondering what
a new one in the package was worth.
thanks
Jo§hua
one!
80% of ebay auctions are a testosterone battle in my opinion!
mike hill
Where did you get the scoop that you bought a few
years ago?
--
Mike Hill
Fieros are like Lays potato chips bet you can't
stop at just one.
Jo吩ua <riv...@eurekanet.com> wrote in message
news:3893FB5...@eurekanet.com...
Clint Nichols
to get them. After seeing several go on ebay for over $65 I decided to put
mine up. (couldn't use it anyway because of the dust on the roads around my
house) That's mine on ebay by the way. Someone must have really wanted it
bad to bid over my reserve on the first day. I never really thought it would
get to the reserve that quickly.
clint
mike hill <mhi...@mindspring.com> wrote in message
news:871tbv$aii$1...@nntp9.atl.mindspring.net...
Jo§hua
me. I am not swearing on it but I am almost positive it was about 18.99
or something.
I just recently saw where they dont make them anymore.
Willam
http://www.holley.com/HiOctn/ProdLine/OthrProd/AirClean/120-123.html
It is true Holley stopped making them 2 years ago but the Fiero clubs and
requests to purchase the mold from Holley the decided to re-issue it in
December for $19.95
The one on Ebay is way too expensive!!
I know I work for Holley.
Wil
Clint Nichols <cli...@ptd.net> wrote in message
news:HJ0l4.648$_p2....@nnrp1.ptd.net...
> I got mine from the Fiero Store 2 years ago a month before they were
unable
> to get them. After seeing several go on ebay for over $65 I decided to
put
> mine up. (couldn't use it anyway because of the dust on the roads around
my
> house) That's mine on ebay by the way. Someone must have really wanted
it
> bad to bid over my reserve on the first day. I never really thought it
would
> get to the reserve that quickly.
>
> clint
>
> mike hill <mhi...@mindspring.com> wrote in message
> news:871tbv$aii$1...@nntp9.atl.mindspring.net...
Lyle Jorgenson
I don't understand how the side scoop installs and does it actually have any
dividends?
And why did Holley make the 2.8 throttle body unit? Was it in all the
"high-output" GM 2.8L applications?
Robert Young wrote:
> Holley is selling the Fiero side scoop again due to high demand. From what I
> hear many Fiero related company's tried to buy the mold to make it
> themselves. So for $19.99 you can get one! go to:
> http://www.holley.com/HiOctn/ProdLine/OthrProd/AirClean/120-123.html
>
> Robert
> Yellow 87GT
>
> Hanko <henr...@hotmail.com> wrote in message
> news:01HW.B4B929CC0...@news.bellatlantic.net...
Robert Young
Clint Nichols
fact work for them look it up in the computer and you will see it marked as
an obsolete part.
There's still 2 days left on the auction for the Holley scoop I have put up
on Ebay. http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=247413612
I would love to see it go to someone from the Fiero Community. To follow up
on the rumors circulating the list I just called Holley sales directly. (no
pussy footing around). The Girl i talked to reported the part is obosolete.
and upon request sent this e-mail as verification.
-----Original Message-----
From: Belind...@holley.com [mailto:Belind...@holley.com]
Sent: Tuesday, February 01, 2000 12:28 PM
To: cli...@ptd.net
Subject: P/N 120-123
This part is obsolete with no replacement.
Belinda Gibbs/Customer Service
Holley Performance Products
(270) 782-2900 Ext. 2257
(800) 638-0032 Ext. 2257
Fax: (270) 781-9940
E-mail: belind...@holley.com
"Willam" <WPNI...@yahoo.com> wrote in message
news:Uy8l4.7303$2C1.1...@news1.rdc1.il.home.com...
Wintek
I'm not exactly sure how it mounts, I've seen them installed, and it looks like it's
screwed on over the original grille on the driver's side. Probably uses the same screw
holes as the stock grille. Only complaint I've heard is that it gathers too much dirt and
junk if you're in a dusty area, but I'd guess it would help feed air in better than
without.
Holley makes a lot of TBI's for a bunch of cars, the GM 2.8L HO's I think were all Holley.
Of course there were a lot of older cars that came stock with Holley Carbs, this is no
different.
Kris
Lyle Jorgenson wrote:
>
> Sorry, I'm a little dense-and a little new.
> I don't understand how the side scoop installs and does it actually have any
> dividends?
> And why did Holley make the 2.8 throttle body unit? Was it in all the
> "high-output" GM 2.8L applications?
>
> Robert Young wrote:
>
> > Holley is selling the Fiero side scoop again due to high demand. From what I
> > hear many Fiero related company's tried to buy the mold to make it
> > themselves. So for $19.99 you can get one! go to:
> > http://www.holley.com/HiOctn/ProdLine/OthrProd/AirClean/120-123.html
> >
> > Robert
> > Yellow 87GT
> >
> > Hanko <henr...@hotmail.com> wrote in message
> > news:01HW.B4B929CC0...@news.bellatlantic.net...
Jim (iskydiveto)
After all the post I just read about this, don't you think your going a
bit overboard. Sure, make your point, but on this thread, it's a tad bit off
topic...
Jim
"Clint Nichols" <cnic...@clinic.guthrie.org> wrote in message
news:VVEl4.4723$_4.5...@news1.epix.net...
Jim (iskydiveto)
off topic in the thread I was reading, but not after I read the rest of the
letter...
Patrick Prafke
top that snap into it. it allows more air to go straight into the throttle
Lyle Jorgenson wrote in message <3896594e$0$86...@news.execpc.com>...
>Sorry, I'm a little dense-and a little new.
>I don't understand how the side scoop installs and does it actually have
any
>dividends?
>And why did Holley make the 2.8 throttle body unit? Was it in all the
>"high-output" GM 2.8L applications?
>
>Robert Young wrote:
>
>> Holley is selling the Fiero side scoop again due to high demand. From
what I
>> hear many Fiero related company's tried to buy the mold to make it
>> themselves. So for $19.99 you can get one! go to:
>> http://www.holley.com/HiOctn/ProdLine/OthrProd/AirClean/120-123.html
>>
>> Robert
>> Yellow 87GT
>>
>> Hanko <henr...@hotmail.com> wrote in message
>> news:01HW.B4B929CC0...@news.bellatlantic.net...