Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

'88 Camaro 305 Question? Coolant Sensors on Heads

0 views
Skip to first unread message

IzePyck

unread,
Dec 3, 2002, 1:06:38 AM12/3/02
to
I have one hole on each head for coolant sensors? I'm not sure if both holes
are for a coolant sensor. Does anybody know if both heads are supposed to
have the same kind of coolant sensor tightened into them? I bought the car
with the sensors disconected and the passenger side one was melted away +
couldn't find the correct wire&fitting for the passenger side. Theres a wire
disconnected close by but it doesn't look like it would fit on the coolant
sensor. Confused and hope someone can diciphere my jabber :)

88 305 TBI

-B


IzePyck

unread,
Dec 3, 2002, 1:14:22 AM12/3/02
to
I have one hole on each head for coolant sensors? I'm not sure if both holes
are for a coolant sensor. Does anybody know if both heads are supposed to
have the same kind of coolant sensor tightened into them? I bought the car
with the sensors disconnected and the passenger side one was melted away +
couldn't find the correct wire fitting for the passenger side. There's a

wire
disconnected close by but it doesn't look like it would fit on the coolant
sensor. Confused and hope someone can decipherer my jabber :)

-B


Bruce Chang

unread,
Dec 3, 2002, 1:42:02 AM12/3/02
to
One's the coolant temp sensor and one is the electric fan switch.

-Bruce


"IzePyck" <bmj...@attbi.com> wrote in message
news:2ZXG9.214413$P31.87964@rwcrnsc53...

IzePyck

unread,
Dec 3, 2002, 7:58:38 PM12/3/02
to
Thanks! You've helped a great deal.

-B


"Bruce Chang" <bec...@swbellnospam.com> wrote in message
news:_mYG9.110$WX1.96...@newssvr30.news.prodigy.com...

IzePyck

unread,
Dec 3, 2002, 8:02:35 PM12/3/02
to

I thought there was a reason the previous owner ran a line from the fan to a
switch, lol


-Thanks again

-B

"IzePyck" <bmj...@attbi.com> wrote in message

news:2rcH9.106434$GR5....@rwcrnsc51.ops.asp.att.net...

CBHvac

unread,
Dec 4, 2002, 12:10:52 PM12/4/02
to
Drivers side head, coolant sensor...for the ECM.
Coolant sensor in the intake, for the gauge.
Coolant sensor, passenger side head, between the 6 and 8 cylinders..for the
electric fans.
Hell of a place for one..and if the wire is missing from the original
sensor, you will need to get the replacement head from NAPA or GM...runs
about $20.

"IzePyck" <bmj...@attbi.com> wrote in message

news:ORXG9.90527$GR5....@rwcrnsc51.ops.asp.att.net...

0 new messages