I have just bought a '88 320iC and I have the brake pad warning light
continuously red on the dashboard.
I check both brake pads sensors, front left and rear right and every things
looks OK.
I replace the sensor with an ordinary wire, just in case of a defective
sensor but the light was still red.
So, what is the problem ?
I would appreciate any help.
Frederic
from France
'88 320iC
'91 Z1
--
email --> fredbr...@wanadoo.fr
UIN --> 25878442
homepage --> http://perso.wanadoo.fr/fred.brossaud/
205 GTI & BMW Z1 Webpage
* Sent from RemarQ http://www.remarq.com The Internet's Discussion Network *
The fastest and easiest way to search and participate in Usenet - Free!
The brake fluid level has a separate warning light. If the fluid level is
OK, it could be a faulty float sensor. Disassembling the sensor and cleaning
it is usually all it takes to fix it.
If you have ABS there will be another brake warning light for that. And
there is a separate warning light for the brake lights.
"Frederic Brossaud" <fredbr...@wanadoo.fr> wrote in message
news:89ef52$dov$1...@wanadoo.fr...
--
Brett Anderson
www.koalamotorsport.com
Home of the E30 M3 CD-ROM repair manual
There is a lose resistor on the back of the dash pod.
Tony
Brett Anderson wrote in message ...