Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Programming Keyless Remote

7 views
Skip to first unread message

Paul Burton

unread,
Dec 5, 2001, 9:00:08 PM12/5/01
to
I just bought a second keyless remote on ebay for my 2000 3.2 TL.
Does anyone know the procedure for programming it?
It has the same FCC# etc. as the original.

Thanks


J. Tiu

unread,
Dec 5, 2001, 11:27:12 PM12/5/01
to
> Does anyone know the procedure for programming it?

You must bring the new remote in to your Acura dealership for
re-programming. And there's probably a small labour charge.

C.U.

unread,
Mar 23, 2002, 2:00:04 PM3/23/02
to
here you go


n Thu, 06 Dec 2001 02:00:08 GMT, "Paul Burton"

C.U.

unread,
Mar 23, 2002, 5:32:56 PM3/23/02
to
here you go

Transmitter Programming

Storing transmitter codes:
The codes of up to three transmitters can be read into the keyless
reciever unit memory.(If a fourth code is stored, the code which was
input first will be erased.)

Note: It is important to maintain the time limits between the steps.

1.Turn the ignition switch ON (| |).

2. Within 1 to 4 sec., push the transmitter lock or unlock button with
the transmitter aimed at the reciever in the passenger's multiplex
control unit.

3. Within 1 to 4 sec., turn the ignition switch OFF.

4. Within 1 to 4 sec., turn the ignition switch ON (| |).

5. Within 1 to 4 sec., push the transmitter lock or unlock button with
the transmitter aimed at the reciever in the passenger's multiplex
control unit.

6. Within 1 to 4 sec., turn the ignition switch OFF.

7. Within 1 to 4 sec., turn the ignition switch ON (| |).

8. Within 1 to 4 sec., push the transmitter lock or unlock button with
the transmitter aimed at the reciever in the passenger's multiplex
control unit.

9. Within 1 to 4 sec., turn the ignition switch OFF.

10. Within 1 to 4 sec., turn the ignition switch ON (| |).

11. Within 1 to 4 sec., push the transmitter lock or unlock button
with the transmitter aimed at the reciever in the passenger's
multiplex control unit.

12. Confirm you can hear the sound of the door lock actuators. Within
1 to 4 sec., push the transmitter lock or unlock button again.

13. Within 10 sec.,aim the transmitters (up to three) whose codes you
want to store at the receiver, and press the transmitter lock or
unlock buttons. Confirm that you can hear the sound of the door lock
actuators after each transmitter code is stored.

14.Turn the ignition switch OFF, and pull out the key.

15. Confirm proper operation with the new code(s).


n Thu, 06 Dec 2001 02:00:08 GMT, "Paul Burton"
<burt...@earthlink.net> wrote:

C.U.

unread,
Mar 23, 2002, 5:33:15 PM3/23/02
to
here you go

Transmitter Programming

0 new messages