Thanks,
Glenn Wallace
Archeryking
Glenn,
Personally, I would avoid using bent shafts. One reason why...
S-A-F-E-T-Y
I Saw some pics of a guy last month who had an aluminum collapse on him
at release, and the arrow went right through his bowhand. Ugly results...
Arrows are a lot less expensive than the rehab that he'll probably have to
go through.
Click on the Archery Injury pic title on the right hand side of the
following page. It is kind of a graphic pic, but it is a serious motivator
for checking your equipment for damage, and checking it often.
http://www.eboard.com/user/davehill
Ron Reddon AKA The Great White Foam Hunter ;-)
Secretary - Little Wind Archers
http://www.crosswinds.net/~littlewind
____________
Currently Shooting:
1998 Martin Scepter II
Straight Limb
Fury Cams
80# draw
30" draw length
Sight Master Pro Elite
Starburst Fiber optic unmagnified scope
29" Beman 340 ICSH arrows
Broadheads: NAP Thunderhead 100s & 125s
Ewan Oughton
www.archery200.cjb.net
Ron Reddon INVALID EMAIL <nos...@nospamzzzzzz.com.invalid> wrote in message
news:39584...@excalibur.gbmtech.net...
If I were going to use very slighty bent shafts for anything, it would not
be for target practice, but maybe for wing or stump shooting when I did not
care if they got lost. How would you ever know if you were shooting well if
your arrows were not strsight?
Here are the possibilities of shooting fatigued equipment let alone any
equipment. Failure is a possibility at anytime.
photos... (NOTE!!! you need to copy the string of text here and paste to the
URL bar in your browser. don't know why.)
http://www.eboard.com/bin/display.cgi?notebody.SH/GS5HU8HT!note4.txt
story and discussion,,,
www.bowsite.org/bowsite/tf/thread.cfm?threadid=211775&messages=44&forum=5
By the time you pay a pro shop to straighten the arrow you can almost get a
new one. Much safer and straighter.
I have tried to straight my 2512's but even a re-straighted arrow doesn't
fly like a new one. Probably because you have weakened the arrow shaft and
thus changed the arrow spine characteristics. It may now be under spined
for your bow causing it to flex too much. This makes an arrow more unstable
and more dangerous.
If the bend is at one end you can cut it down and use it for the kids to
bounce off the walls and floor in their low low poundage bows.
If the bend is in the middle cut the arrow down to about 8" from the nock
and insert a BIC pen refill and use it to write with.
Roy
"Ron Reddon INVALID EMAIL" <nos...@nospamzzzzzz.com.invalid> wrote in
message news:39584...@excalibur.gbmtech.net...
> "Glenn Wallace" <gl...@uoguelph.ca> wrote in message
> news:3957DC72...@uoguelph.ca...
> > I have a few arrow shafts that are slightly bent. Is it safe to use
> > them for archery practice? Obviously I have no intention of using
> > them for hunting, I would simply use them for routine practice.
>
Glenn Wallace <gl...@uoguelph.ca> wrote in message
news:3957DC72...@uoguelph.ca...
> I have a few arrow shafts that are slightly bent. Is it safe to use
> them for archery practice? Obviously I have no intention of usin them
> for hunting, I would simply use them for routine practice.
>
> Thanks,
> Glenn Wallace
>