Does anyone have a Quake Reg# Gen?!?
PHILLIP ESTELLE
chak...@ix.netcom.com (Evan Chakroff) wrote:
>anyone have it?
I find it interesting that while Quakes been out for a while, not a
single registration number has reached my server. (Not that it
matters, I got the full version from iD)
However, It leads me to wonder if the same Reg# can be used multiple
times or not. Can you re-enter the first number that the program
generates, or must the program generate it? If the program must
generate it, and since it's more or less random, I doubt if the same
Reg# would work twice.
I know I've sen a lot of speculation in this newsgroup about this, and
a lot of the more technical discussion make sense, but I've yet to see
proof that it can work. Has anyone here ACTUALLY USED THE SAME
REGISTRATION NUMBER TWICE? As far as I'm converned, you need not post
the number here. A "YES" or "NO" answer will serve. I'm just
curious, really.
Phil
XGenXVII
Quake doesn't need any codez to run. U can still run it without the CD.
Evan Chakroff <chak...@ix.netcom.com> wrote in article
<52lvsi$b...@dfw-ixnews11.ix.netcom.com>...
> anyone have it?
>
javier a heredia
PHILLIP ESTELLE (pest...@in.net) wrote:
: chak...@ix.netcom.com (Evan Chakroff) wrote:
: >anyone have it?
: Phil
First you need to see what the chance of getting the lock are since a
random number is generated. I figure you have a 1:10000000000 chance of
getting a repeated lock for whatever key is released. Best thing to do is
figure out the unlocking algorithm (which would be VERY easy if somebody
were to release two locks with the two keys) and write a program that
generates the key.
Dukrous.
nightmar
In article <52lvsi$b...@dfw-ixnews11.ix.netcom.com>,
chak...@ix.netcom.com says...
>
>anyone have it?
I herd that quake chages the code each time it is installed but i do
not know for sure.
Brian Hoover
Just dl it from:
ftp://ftp.indirect.com/pub/www/bladernr/intake/
23 megs, but in my opinion it's worth it
--
Brian Hoover
http://www.vicon.net/~bhoover/
/dev/null
Each code depends on the source code number found on the back of the
CD-ROM cover (i.e. mine from Wal-Mart is Source code 88)
but for a game like quake, why would anyone not pay for it?
On 6 Oct 1996 19:51:52 GMT, "Hektic" <nob...@nowhere.com> wrote:
]>
]> I believe that Quake generates a random # everytime it is
installed. I've
]> seen people post reg #'s - I don't see how they would be any good.
]>
]> Good Luck
Khemist
well you might want to give out the password to get in!
On Mon, 07 Oct 1996 09:36:09 -0400, Brian Hoover <bho...@vicon.net>
wrote:
teller
Come on guys, I find it hard to believe no one's found a way to get to
all the goodies locked on their shareware CD yet. The cd has
something like 8 of their other first person perspective games on it,
they're just locked up. Why waste time looking for a key to fit the
lock when you can just jump the fence? I know this much:
The games are stored in a .mj3 format, which appears to be basically a
self extracting .exe (I assume .exe because it's header begins with
"MZ"). When you enter the code it places some files from the CD on
your HD which allow you to install the other games. This means that
all the stuff we need is on the CD, we just need to be able to get to
it. Personally, this is the first game I've found that wasn't easy to
beat the copy protection on. I like a chalenge.
-Ian Kelly, <tel...@nwlink.com>
_\|My questing beast is one of knowlege.|/_
/| Have you seen it pass this way? |\
Mohaundus Gandhi
On Mon, 07 Oct 1996 01:30:14 GMT, jwig...@comp.uark.edu (/dev/null)
wrote:
why bother with it all - it is all over the net, just look : )
(it's NOT at my webpage, so don't come there and tehn yell at me about
it)
later
** **sig file - don't ask** **
visit my webpage at:
http://wso.williams.edu/~esmith/
Michael Geier
Somebody inform this "newbie"...he obviously knows nothing at all about
what a "Generator" is used for.
--
mge...@airmail.net
"Fighting for peace is like fucking for virginity."
XGenXVII <xg...@usa.net> wrote in article
<01bbaf81$f9e07760$fe018ea1@warbird>...
Ironhead
rez...@village.ios.com (Jonathan Rosenberg (rez)) wrote:
>anybody know why the testdrive system on the cd doesn't work?
>always get 'can't find cursor.exe' even though it's there....
>-----------------------------------------
>jonathan rosenberg
>rez...@village.ios.com
>"We use choicest juicy chunks of fresh
>Cornish ram's bladder, emptied, steamed,
>flavoured with sesame seeds whipped into
>a fondue and garnished with lark's vomit."
> -some guy in Duluth
>-----------------------------------------
Here's how I got it to work:
1. Put the "qcrack.exe" file in the idstuff directory that gets
created.
2. In windows, call up the Quake unlock program and let it generate
your code
3. After you get that code, go to the DOS prompt, don't close the
Quake program, and get into the idstuff directory.
4. Then type: qcrack -g quake XXXXXXXXXX (x being whatever the code
you got from the generator was.
5. After that, you get your key code. Close DOS and put that number
in the Quake unlock program and viloa! Now you can install quake, the
full version.
Later,
Ironhead
Brazen
On Mon, 07 Oct 1996 01:30:14 GMT, jwig...@comp.uark.edu (/dev/null) wrote:
>Each code depends on the source code number found on the back of the
>CD-ROM cover (i.e. mine from Wal-Mart is Source code 88)
>but for a game like quake, why would anyone not pay for it?
Here ya go!
Brazen
Brazen
begin 644 gnm-id.crack.zip
<uuencoded_portion_removed>
2``````,``P"I````]W@`````
`
end
Deslock
Andrew Wagster
Could anyone put a copy up? Please?
ar...@poboxes.com
On Sat, 12 Oct 1996 06:06:02 GMT Bra...@netcom.com (Brazen) wrote:
> Here ya go!
>
>Brazen
Just tried to download the encrypted version from www.testdrive.com/IDOUT/ as
mentioned in the .NFO file, but that directory doesn't exist on that server.
What next?
Arby
gla...@whatever.net
Get the $7.00 shareware cd, and you're in.
If you're not ready to die;
Then you're not really alive.
Dave Neely
It does work, place the crack file into the "idstuff" directory. When
you get the screen in windows that gives you the challenge code (the
code that starts with Q), minimize the window, then run the crack from
a dos prompt, putting in the code as stated in the directions. One
other thing, dont put in the game name on the command line, just type
qcrake <challenge string>
Ferdinand Feghoot
On 12 Oct 1996 14:27:14 GMT, awag...@ix.netcom.com(Andrew Wagster)
wrote:
>Could anyone put a copy up? Please?
Buy the Quake CD for $7 - $8 and use the Quake crack found here - all
the id games are on the CD. Probably faster than dl'ing unless you
got a T1----
ar...@poboxes.com
Thank ya all for those 'nice' replies advising me to buy a $8.00 CD ROM or
something. But smarties, there are more countries than the US only. I haven't
found a CD with the encrypted part in the Netherlands yet. So newbees, don't
think every .com address is a US one and start realizing there's more than
the US alone.
Arby.
j...@hawaii.conterra.com
>why bother with it all - it is all over the net, just look : )
>(it's NOT at my webpage, so don't come there and tehn yell at me about
>it)
Cause you DO want the CD. The Nine Inch Nails soundtrack is at least
worth the 10 bucks and adds alot to the game.
Brazen
On Sat, 12 Oct 1996 13:52:03 GMT, ro...@ix.netcom.com (Deslock) wrote:
>Bra...@netcom.com (Brazen) wrote:
>
>>On Mon, 07 Oct 1996 01:30:14 GMT, jwig...@comp.uark.edu (/dev/null) wrote:
>
>>>Each code depends on the source code number found on the back of the
>>>CD-ROM cover (i.e. mine from Wal-Mart is Source code 88)
>>>but for a game like quake, why would anyone not pay for it?
>
>> Here ya go!
>
>>Brazen
>
>It doesn't work. It needs a quake.doc.
>
It works! You need to put the key fen in the DIR you insytalled the QUAKE -
Start program inot (/IDSTUFF by default) Then you'll need to be in Windows to
switch between the Quake Start program, and the DOS window the key gen uses!
You will also need to know in advance of running the crack... the *.mj3 filename
of the game you want to install.... and enter it on the "Qcrack" command line!
Good Luck!
Brazen
Brazen
On 12 Oct 1996 23:00:58 GMT, ar...@poboxes.com wrote:
>On Sat, 12 Oct 1996 06:06:02 GMT Bra...@netcom.com (Brazen) wrote:
>
>> Here ya go!
>>
>>Brazen
>
>Just tried to download the encrypted version from www.testdrive.com/IDOUT/ as
>mentioned in the .NFO file, but that directory doesn't exist on that server.
>What next?
>
>Arby
You have two choices at this point.
1: Buy the $6.99 CD (which I highly recommend)
2: Search around on the web site for those files (I've never been there so I
personally have no idea where they might be)
Good Luck!
Brazen
Brazen
I suggest you move to the states then bud. ;]
(just a joke!)
Brazen
Brazen
On Sun, 13 Oct 1996 04:36:28 GMT, dne...@netime.com (Dave Neely) wrote:
>On Sat, 12 Oct 1996 13:52:03 GMT, ro...@ix.netcom.com (Deslock) wrote:
>
>>Bra...@netcom.com (Brazen) wrote:
>>
>>>On Mon, 07 Oct 1996 01:30:14 GMT, jwig...@comp.uark.edu (/dev/null) wrote:
>>
>>>>Each code depends on the source code number found on the back of the
>>>>CD-ROM cover (i.e. mine from Wal-Mart is Source code 88)
>>>>but for a game like quake, why would anyone not pay for it?
>>
>>> Here ya go!
>>
>>>Brazen
>>
>>It doesn't work. It needs a quake.doc.
>>
>
>It does work, place the crack file into the "idstuff" directory. When
>you get the screen in windows that gives you the challenge code (the
>code that starts with Q), minimize the window, then run the crack from
>a dos prompt, putting in the code as stated in the directions. One
>other thing, dont put in the game name on the command line, just type
>qcrake <challenge string>
Not sure about that last statement, bud. I "believe" you need to enter the
games *.mj3 filename, so that it can decrypt the *.mj3 and make it a
self-extracting LHA? (Don't quote me on this please!)
Brazen
Jonathan Rosenberg (rez)
Bra...@netcom.com (Brazen) wrote:
>On Mon, 07 Oct 1996 01:30:14 GMT, jwig...@comp.uark.edu (/dev/null) wrote:
>
>>Each code depends on the source code number found on the back of the
>>CD-ROM cover (i.e. mine from Wal-Mart is Source code 88)
>>but for a game like quake, why would anyone not pay for it?
>
> Here ya go!
>
>Brazen
Daredevil
cAN SOMEONE PLEASE REPOST THE CRACK
d.t...@ix.netcom.com (David Teach) wrote:
>ro...@ix.netcom.com (Deslock) wrote:
>>Bra...@netcom.com (Brazen) wrote:
>>
>>>On Mon, 07 Oct 1996 01:30:14 GMT, jwig...@comp.uark.edu (/dev/null) wrote:
>>Each code depends on the source code number found on the back of the
>>>>CD-ROM cover (i.e. mine from Wal-Mart is Source code 88)
>>
>No, I don't think the code is used for the unlock. I believe it is for
>re-imbursing the purchase kickback to the store where you got it, since
>they don't make much on the shareware price compared to a full version.
>>
>>> Here ya go!
>>
>>It doesn't work. It needs a quake.doc.
>>
>I believe that I read where it must be run from the \IDSTUFF directory,
>where "flowlib.dir" is, using the name of the decoded game subdirectory if
>its not Quake. Some people seem to have gotten it to work with the encoded
>CD.
>--
>________________________________________________
>Visit my GinRummy Shareware Card Game Homepage:
>http://ourworld.compuserve.com/homepages/dteach/
Spike
On 13 Oct 1996 20:55:09 GMT, ar...@poboxes.com wrote:
>Thank ya all for those 'nice' replies advising me to buy a $8.00 CD ROM or
>something. But smarties, there are more countries than the US only. I haven't
>found a CD with the encrypted part in the Netherlands yet. So newbees, don't
>think every .com address is a US one and start realizing there's more than
>the US alone.
>
>Arby.
>
Now only if you can get the Gov't of the US to clue in on that
fact, then the Net might not be such a target for those bigots in DC.
Spike
Spike
On Tue, 15 Oct 1996 00:43:18 GMT, rez...@village.ios.com (Jonathan
Rosenberg (rez)) wrote:
>
>anybody know why the testdrive system on the cd doesn't work?
>always get 'can't find cursor.exe' even though it's there....
The only reason **I** know it wouldn't run, is the requirement for
an FPU. If your system doesn't have an FPU, you're out of luck.
If it does, then I'm just as lost as you.
RG Taylor
On Mon, 14 Oct 1996 03:45:04 GMT, Bra...@netcom.com (Brazen) wrote:
the only thing it won't work on is the Final Doom on the CD...
everything else unlocks
Marc Reiter
On Fri, 11 Oct 1996 20:51:28 GMT, pest...@in.net (PHILLIP ESTELLE)
wrote:
>>The only files on the CD are
>>install files, and neither the readme files or the manual have any
>>info about this...are there any shareware copies out there without the
>>full encrypted version? I hope I didn't waste $10 on stuff I'll just
>>have to buy again..
>
>Actaully, you probably did waste your money. Was the source code on
>your CD 24-CCITY? If so, a freind of mine got a CD from incredible
>Universe with that source code that had ONLY the shareware game in the
>root directory. There wre NO OTHER directories of ANY KIND on the CD.
Can someone confirm a source code of a CD that actually has the
registered version on it??
I bought the 24-CCITY one before I read the above, and it only has the
installs for the shareware version.. Today I saw another one that was
labled 12-BSTBY... anyone know if this one is the real thing??
- Marc Reiter
NetDiver
On Wed, 16 Oct 1996 11:54:04 GMT, ma...@one.net (Marc Reiter) wrote:
»On Fri, 11 Oct 1996 20:51:28 GMT, pest...@in.net (PHILLIP ESTELLE)
I bought one from Egghead Software code (34-EGGH)
and managed to unlock ALL of it (Quake, Doom, Doom2, Final Doom,
Hexen, Heretic, Wolf3d plus some add-ons).
Thanks for the crack, whoever you are!
NetDiver
ar...@poboxes.com
On Tue, 15 Oct 1996 19:38:46 GMT sp...@sparc1.castles.com (Spike) wrote:
> Now only if you can get the Gov't of the US to clue in on that
>fact, then the Net might not be such a target for those bigots in DC.
Actually, other gov'ts already have followed the example of the one in DC and
made the net target #1.
I was wondering something else lately. The net could be a very powerful
weapon in wartime or at least something VERY helpful. In the beginning it was
something for warfare. Nowadays we all believe it's not anymore. Is it? The
US military did in fact an amazing job. They managed to create a worldwide
network which is being maintained by countless organisations and people and
(almost) everyone is willing to pay for it and utilizes it. Every technical
problem on the net is being solved in the best way possible and it costs the
military forces not even one penny (ok, they have their own milnet and their
own servers, but that's nothing compared to the whole internet).
What will happen in real wartime with the internet? Any ideas, fantasies
whatsoever?
Arby
The Master
Okay...a lot of people are guessing that I'm giving out the
registered>v. of Quake...but I'm not. What I am going to do is tell you
how to convert the Shareware v. into the registered version.
If you look in the \QUAKE\ID1 directory of registered Quake you will
find two files - PAK0.PAK and PAK1.PAK. Simply copy the PAK1.PAK into
the shareware version's directory of the same name. Viola! Now you get
the other four levels. Unfortunately, the file is over 30mb, so it is
kind of foolish to post it on Usenet. Although, some enterprising
individual just may...
--
_____________________________________________________
Ven...@magiccarpet.com
Ruler Over All He Surveys
Bow To Him And Give Him Money
_____________________________________________________
Matthew Smylie
In article <3264d1dd...@news.earthlink.net>
NetDiver wrote:
So is the code different for each store? Like if I was going to buy it
from Software Etc., what'd the code be?
matt
==============================================================
=
mr. 66 Matthew Smylie
66 mr...@earthlink.net
66
666666 Lou Reed Quote of the Week
66 66
66 66 "I'm a chauvinist down to my toes."
66 66
66 66
6666666
db
I installed the quake CD. When I open the Quake unlock program the
program window opens up for a fraction of a second. I have tried this
several times after uninstall Quake and deleting the TDWIN.INI file.
Does anybody have any sugguestions to solve this.
Thanks
Shane McCarthy
Can someone please repost the crack, I missed it. Thanks
--
Shane R. McCarthy
Windsor, Ont
mca...@ftn.net
eng...@deathsdoor.com
eng...@deathsdoor.com
mas...@flinet.com
begin 644 quakecrk.zip
<uuencoded_portion_removed>
2``````,``P"I````]W@`````
`
end
mas...@flinet.com
On Wed, 16 Oct 1996 02:05:35 GMT, lion...@flex.net (RG Taylor) wrote:
:On Mon, 14 Oct 1996 03:45:04 GMT, Bra...@netcom.com (Brazen) wrote:
:
:the only thing it won't work on is the Final Doom on the CD...
:everything else unlocks
works fine on final doom
Here's Johnny!
I had the same problem. If you'll go to sysedit and then to
system.ini put a semicolon in front shell=explorer.exe then create a
new line and input shell=progman.exe and restart windows the testdrive
unlock program should stay open.
Daredevil
mas...@flinet.com wrote:
I couldn't get it to work at all..kept telling me the key didn't fit
when i put the serial # in that it generated
ROTTY
dj...@concentric.net (db) wrote:
>I installed the quake CD. When I open the Quake unlock program the
>program window opens up for a fraction of a second. I have tried this
>several times after uninstall Quake and deleting the TDWIN.INI file.
>Does anybody have any sugguestions to solve this.
>Thanks
You have to run the crack in DOS, besides that, it should work. ROTTY
Randall Flagg
In article <326739e...@news.concentric.net>, dj...@concentric.net (db) wrote:
>I installed the quake CD. When I open the Quake unlock program the
>program window opens up for a fraction of a second. I have tried this
>several times after uninstall Quake and deleting the TDWIN.INI file.
>Does anybody have any sugguestions to solve this.
>
>Thanks
It happens. The Testdrive program is VERY finicky. Try to reboot win 95
clean. (I think holding shift aborts any programs in startup, can't remember
for sure which key though.)
That should do it for most people. Booting clean and then going IMMEDIATELY
to the Quake Start program works for 90% of people with this problem. If it
doesn't work then REM out anything in your WIN.INI that starts with LOAD= or
RUN= (You can enable them again after you unlock.)
Also some people have had problems if the CD-ROM is not located at the first
available drive letter. So, if your hard drive is C: your CD-ROM should be D:
That's about it, Good Luck!
Flagg
Marc Reiter
On 16 Oct 1996 22:19:17 GMT, mr...@earthlink.net (Matthew Smylie)
wrote:
>> »>>The only files on the CD are
>> »>>install files, and neither the readme files or the manual have any
>> »>>info about this...are there any shareware copies out there without
>> the
>> »>>full encrypted version? I hope I didn't waste $10 on stuff I'll
>> just
>> »>>have to buy again..
>> »>
>> »>Actaully, you probably did waste your money. Was the source code on
>> »>your CD 24-CCITY? If so, a freind of mine got a CD from incredible
>> »>Universe with that source code that had ONLY the shareware game in
>> the
>> »>root directory. There wre NO OTHER directories of ANY KIND on the
>> CD.
Just to let ya all know.. Computer City too my CD back for store
credit, do it wasn't a total loss..
William Jang
Type this instead: qcrack Q12345678901 (or whatever
the number is). Do NOT type in the -g quake part as
suggested. And voila... you have the goods, dude.
Willem Avé
please e-mail me the file.
THANX
wil...@voicenet.com
William Jang <ja...@direct.ca> wrote in article
<3268424d...@news.direct.ca>...
Malachi
William Jang wrote:
> Type this instead: qcrack Q12345678901 (or whatever
> the number is).
Don't mean to come off as a moron here, but, where would I find the
assignment #. I keep getting "can't find Quake.doc"
Thanks,
--=Malachi=--
@-
///|\\\
^
SevereTwitch
Here's a cracker for the Shareware CD - All files.
SevereTwitch
begin 644 qcrack.zip
<uuencoded_portion_removed>
75%!+!08`````!0`%`!@!```X8P$`````
`
end
Dave
Andrew Wagster wrote:
>
> Could anyone put a copy up? Please?
what kind of morron is gonna spend up to 5 hours uploading a file.
The whole thing is a little more that 14 mg
Marcel D. Hart
Malachi <mal...@akasha.jammys.net> wrote in article
<3268E2...@akasha.jammys.net>...
You need to run qstart.exe with the cd in the drive. It will take you to
an unlock screen. From there you can get the q number.
Daredevil
ja...@direct.ca (William Jang) wrote:
>On Fri, 18 Oct 1996 00:57:59 GMT, dard...@cris.com (Daredevil) wrote:
>>mas...@flinet.com wrote:
>>
>>>On Wed, 16 Oct 1996 02:05:35 GMT, lion...@flex.net (RG Taylor) wrote:
>>
>>>:On Mon, 14 Oct 1996 03:45:04 GMT, Bra...@netcom.com (Brazen) wrote:
>>>:
>>>:the only thing it won't work on is the Final Doom on the CD...
>>>:everything else unlocks
>>>works fine on final doom
>>I couldn't get it to work at all..kept telling me the key didn't fit
>>when i put the serial # in that it generated
>>
>>
>Type this instead: qcrack Q12345678901 (or whatever
>the number is). Do NOT type in the -g quake part as
>suggested. And voila... you have the goods, dude.
Yep.... worked like a charm!! thanks
The Master
Okay...a lot of people are guessing that I'm giving out the registered v.
of Quake...but I'm not. What I am going to do is tell you how to convert
the Shareware v. into the registered version.
If you look in the \QUAKE\ID1 directory of registered Quake you
will find two files - PAK0.PAK and PAK1.PAK. Simply copy the PAK1.PAK into
the shareware version's directory of the same name. Viola! Now you get
the other four levels. Unfortunately, the file is over 30mb, so it is kind
of foolish to post it on Usenet. Although, some enterprising individual
just may...
--
_____________________________________________________
Ven...@magiccarpet.com
Ruler Over All He Surveys
Bow To Him And Give Him Money
_____________________________________________________
Malachi <mal...@akasha.jammys.net> wrote in article
<3268E2...@akasha.jammys.net>...
> William Jang wrote:
>
> > Type this instead: qcrack Q12345678901 (or whatever
> > the number is).
>
jason
Marcel D. Hart wrote:
>
> Malachi <mal...@akasha.jammys.net> wrote in article
> <3268E2...@akasha.jammys.net>...
> > William Jang wrote:
> >
> > > Type this instead: qcrack Q12345678901 (or whatever
> > > the number is).
> >
> > Don't mean to come off as a moron here, but, where would I find the
> > assignment #. I keep getting "can't find Quake.doc"
> >
> > --=Malachi=--
> >
>
> You need to run qstart.exe with the cd in the drive. It will take you to
> an unlock screen. From there you can get the q number.
I KEEP GETTING THE SAME THING! IT CAN'T FIND THE QUAKE.DOC FILE!
PHILLIP ESTELLE
ma...@one.net (Marc Reiter) wrote:
>On Fri, 11 Oct 1996 20:51:28 GMT, pest...@in.net (PHILLIP ESTELLE)
>wrote:
>>your CD 24-CCITY? If so, a freind of mine got a CD from incredible
>>Universe with that source code that had ONLY the shareware game in the
>>root directory. There wre NO OTHER directories of ANY KIND on the CD.
>registered version on it??
>I bought the 24-CCITY one before I read the above, and it only has the
>installs for the shareware version.. Today I saw another one that was
>labled 12-BSTBY... anyone know if this one is the real thing??
My CD with the source code of 12-BSTBY (I got it from Best Buy) has
all the candy on it.
Buy it...
Phil
Peter Mess
Hi.
Anyone has a key or reg. for Syntrillium Chimes 1.0
This will be great, I will send you a reward!
Peter
tHATDUDE!
begin 644 Wind Chimes 1.0 reg patch.zip
<uuencoded_portion_removed>
J(````$<)``!#2$E-15,M0RY%6$502P4&``````,``P"G````9A4`````
`
end
tHATDUDE!
On Sun, 20 Oct 1996 18:02:38 +0200, Peter Mess <me...@igr.nl> wrote:
>Anyone has a key or reg. for Syntrillium Chimes 1.0
this works 4 sure
tHATDUDE
mort...@eunet.no
Any of these reduce DOOM2 to approx 7 meg. ACB 5.5 meg (not tested yet.)
Anyway. it is still a rather big program for posting.
What about all the other moroons that post 21-50 disks worth every now and then.
I'd say that IS a waste of BANDWITH.
Maybe nize progs, but in the end it pays out to buy them anyway.
I got doom2 and enjoy playing it. Buy it you too, and Play me! I'll bazook you.
-Morten Brendefur-
Real people use real names.
Marcel D. Hart
The Master <ven...@magiccarpet.com> wrote in article
<01bbbe8d$e35cda40$28e4e5cd@brock>...
> Okay...a lot of people are guessing that I'm giving out the registered
v.
> of Quake...but I'm not. What I am going to do is tell you how to convert
> the Shareware v. into the registered version.
>
> If you look in the \QUAKE\ID1 directory of registered Quake you
> will find two files - PAK0.PAK and PAK1.PAK. Simply copy the PAK1.PAK
into
> the shareware version's directory of the same name. Viola! Now you get
> the other four levels. Unfortunately, the file is over 30mb, so it is
kind
> of foolish to post it on Usenet. Although, some enterprising individual
> just may...
> --
Are you for real? You aren't giving out Jack. If one had the registered
version why the heck would they want to convert the shareware?
What this thread is about is telling people how to unlock the CD containing
IDSoftware games.
Neil Pentland
This program is used to download sites. it was sold by sausage software
but they no longer sell it
can anyone help
ACE OF DEATH
Ironhead wrote:
>
> rez...@village.ios.com (Jonathan Rosenberg (rez)) wrote:
>
> >anybody know why the testdrive system on the cd doesn't work?
> >always get 'can't find cursor.exe' even though it's there....
>
> >-----------------------------------------
> >jonathan rosenberg
> >rez...@village.ios.com
> >"We use choicest juicy chunks of fresh
> >Cornish ram's bladder, emptied, steamed,
> >flavoured with sesame seeds whipped into
> >a fondue and garnished with lark's vomit."
> > -some guy in Duluth
> >-----------------------------------------
>
> Here's how I got it to work:
> 1. Put the "qcrack.exe" file in the idstuff directory that gets
> created.
> 2. In windows, call up the Quake unlock program and let it generate
> your code
> 3. After you get that code, go to the DOS prompt, don't close the
> Quake program, and get into the idstuff directory.
> 4. Then type: qcrack -g quake XXXXXXXXXX (x being whatever the code
> you got from the generator was.
> 5. After that, you get your key code. Close DOS and put that number
> in the Quake unlock program and viloa! Now you can install quake, the
> full version.
>
> Later,
> IronheadThanks Ironhead:
Downloaded the qcrack, went out and spent the $9.43 on the quake sw cd
and folowed the instructions given and now have all of ID's games off of
the CD. One thing, if the qcrack doesn't work the first time is will
the second try arourd.
Trngyn
True, true, I'm trying to convert the shareware into the registered
version, what if I don't know any1 w/the registered version, what da I
do? It wasn't really too much help was it.
--
邢 唷��
Krazy
Anyone know where I can get version 1.0??
They only have version 1.01 on their web site.
In article <326e7b3d...@news.mindspring.com>, m...@your.moms says...
?
Try using netscaped cacher. it does the same thing or use a prog called
teleport pro. Both are at the tucows sites
Neil Pentland <cps...@fan.net.au> wrote in article
<326A0D...@fan.net.au>...
rharris
Dave wrote:
>
> Andrew Wagster wrote:
> >
> > Could anyone put a copy up? Please?
> what kind of morron is gonna spend up to 5 hours uploading a file.
> The whole thing is a little more that 14 mg
Really, when you can spend 10 bucks on the quake shareware CD,
grab the quake crack file and get doom unlocked from there....
Chris Anderson
Clas...@c2.org wrote:
>
> On Sun, 20 Oct 1996 21:29:20 +1000, Neil Pentland <cps...@fan.net.au>
> wrote:
>
> >This program is used to download sites. it was sold by sausage software
> >but they no longer sell it
> >
> >can anyone help
>
>
> No, sir, sorry, sir, no snatch on this boy. I looked and looked, but
> no matter where I hunted, no snatch was anywhere to be found near my
> HARDware. <g>
>
> ClassAct
--
Sounds like a ***BIG*** persoanl problem (grin)....
Iron Man...
Can someone send me a copy of the crack for telix 3.51.
Thanks.
Joe Moura (mo...@gophone.com) or (mo...@server.uwindsor.ca)
EERTW
Wolverine
Here is the crack for everyone that wants it.
ACE OF DEATH <"DEATH"@(800)YOU -R- DEAD.COM> wrote in article
<54eiui$o...@news.ptd.net>...
begin 600 qcrack.zip
<uuencoded_portion_removed>
4!08`````!0`%`!0!``!'@P``````
`
end
Krazy
In article <326c67c...@140.142.64.6>, Nox says...
>
>On 21 Oct 1996 05:48:15 GMT, kr...@insane.net (Krazy) wrote:
>
>>>>Anyone has a key or reg. for Syntrillium Chimes 1.0
>
>disabled features.
Don't know about version 1.0 (Can not find it but have crack for it!) but
version 1.01 stops every few minutes and asks if you want to register or
continue.
Musashi
Could you report patch for above? Could find attachment.
--
Musashi
mmus...@usa.net
tHATDUDE! <m...@your.moms> wrote in article
<326e7b3d...@news.mindspring.com>...
> On Sun, 20 Oct 1996 18:02:38 +0200, Peter Mess <me...@igr.nl> wrote:
>
>
> >Anyone has a key or reg. for Syntrillium Chimes 1.0
>
>
Bob
In article <326739e...@news.concentric.net>, dj...@concentric.net says...
>
>I installed the quake CD. When I open the Quake unlock program the
>program window opens up for a fraction of a second. I have tried this
>several times after uninstall Quake and deleting the TDWIN.INI file.
>Does anybody have any sugguestions to solve this.
>
>Thanks
Do you by any chance have your hard drive compressed? I was having the same
problem and after reading the readme file found that the unlock will not work if you
have a compressed hard drive. So I brought it to work and used a pc there :)
Krazy
begin 755 chimes-c.exe
<uuencoded_portion_removed>
%'P?+K@D
`
end
Krazy
begin 755 351crack.com
<uuencoded_portion_removed>
B#X?!6K0",/^(SHD67P'-$)"_U`__%FP!_Q9N`9"X`$S-(0
`
end
R-E-X
I got the crack program but i didnt get quake from the cd just from ftp
could the qstart program work for my quake and could send it to me via
email!?
thanks
--
________ __________ ____ ____
| __ | | | \ \ / /
| | | | | _______| \ \ / /
| | | | | |_______ \ \ / /
| |__| | | | \ \/ /
| __ \ | _______| / \
| | \ \ | |_______ / /\ \
| | \ \ | | / / \ \
|___| \___| |__________| /____/ \____\
R-E-X
R-E-X
Marcel D. Hart
R-E-X <sei...@mail.idt.net> wrote in article
<326E9A...@mail.idt.net>...
> I got the crack program but i didnt get quake from the cd just from ftp
> could the qstart program work for my quake and could send it to me via
> email!?
> thanks
>
> --
>
>
No, the crack will not work on the shareware version. You need the full
version which is only on the CD.
rogue
>>
>> Here's how I got it to work:
>> 1. Put the "qcrack.exe" file in the idstuff directory that gets
>> created.
>> 2. In windows, call up the Quake unlock program and let it generate
>> your code
>> 3. After you get that code, go to the DOS prompt, don't close the
>> Quake program, and get into the idstuff directory.
>> 4. Then type: qcrack -g quake XXXXXXXXXX (x being whatever the code
>> you got from the generator was.
>> 5. After that, you get your key code. Close DOS and put that number
>> in the Quake unlock program and viloa! Now you can install quake, the
>> full version.
>>
>> Later,
>> IronheadThanks Ironhead:
>
>Downloaded the qcrack, went out and spent the $9.43 on the quake sw cd
>and folowed the instructions given and now have all of ID's games off of
>the CD. One thing, if the qcrack doesn't work the first time is will
>the second try arourd.
Well That all looks fine and dandy but it don't work.. I have
tried about well, lost count on my hands and toes, and it don't do
jack shit.. absolulty nothing.. doesn't work the first time , 2nd,
3rd, 4th and so on. then what...???? Someone is laughing somewhere....
Psy...
Musashi
Thankz for the patch...
tHATDUDE! <m...@your.moms> wrote in article
Nobless
Yeah that's true..!
tracer
On Thu, 24 Oct 1996 01:56:45 +0200, Nobless <cr...@crack.bl> wrote:
>Here you are, to crack!
What about v1.1...
Thomas Doh
Have anyone found it on the net.
if so please post or e-mail address
Thanks
Marcel D. Hart <mh...@gramercy.ios.com> wrote in article
<01bbc133$8fbde3e0$0842...@mhart.ios.com>...
Nobless
Encrypt
Hey, could you email me the crack, I don't seem to know how to save it without it
being just an empty file. I would really appreciate it.
Encrypt
§ Cyanide §
Does anyone have any idea as to how I could decrypt a password from
Eudora? Or WSFTP? I'm using Dads computer and I want to be able to login
while he's gone. Unfortunatley, I don't have the password. If someone
would be kind enuf as to send me the crack or send me some ideas, I
would appreciate it. I'm not much into programming, but if you're
willing to teach, I'm willing to learn. So thanx in advance...
--
/\---/\
(0 0)
===oo00o====(_)====0oo0 =============================
+ Anthony Homer ~ aho...@netvigator.com ~ +
+ http://www.dragonfire.net/~Cyanide/ +
+ the best homage we can pay +
+ to truth is to use it... +
=====oo00===== 00oo==================================
( ) ( )
\ ( ) /
ReBeL
R-E-X <sei...@mail.idt.net> wrote in article
> I got the crack program but i didnt get quake from the cd just from ftp
> could the qstart program work for my quake and could send it to me via
> email!?
Nope, You need the cd version. Thats where the encrypted copy is.
thumper^
In article <3268424d...@news.direct.ca>, ja...@direct.ca says...
>
>On Fri, 18 Oct 1996 00:57:59 GMT, dard...@cris.com (Daredevil) wrote:
>
>>mas...@flinet.com wrote:
>>
>>>On Wed, 16 Oct 1996 02:05:35 GMT, lion...@flex.net (RG Taylor)
wrote:
>>
>>>:On Mon, 14 Oct 1996 03:45:04 GMT, Bra...@netcom.com (Brazen) wrote:
>>>:
>>>:the only thing it won't work on is the Final Doom on the CD...
>>>:everything else unlocks
>>>works fine on final doom
>>I couldn't get it to work at all..kept telling me the key didn't fit
>>when i put the serial # in that it generated
>>
>>
>Type this instead: qcrack Q12345678901 (or whatever
>the number is). Do NOT type in the -g quake part as
>suggested. And voila... you have the goods, dude.
yeah yeah yeah, i did that shit, but it said coulnd't open sku file,
what the hell is that? and where would i get it? someone pleze poast it
thanx
___ __ ___ __ __ _ _
( ) ( \ ( ) / \ / \ ( \ ( )
( ) ( \( ) / /\_\ / /\ \ ( \( )
( ) ( )\ ) \ \ / /__\ \ ( )\ )
(_) (_) \_) \ \ /_/ \_\ (_) \_)
__ \ \
\ \/ /
\__/
Jesse
I missed it. Please repost.
Chris Waldrop
: yeah yeah yeah, i did that shit, but it said coulnd't open sku file,
: what the hell is that? and where would i get it? someone pleze poast it
You have to put the crack in the IDSTUFF directory. I ran it after it gave
me the challenge code, and it worked just fine.
Vanbo
R-E-X <sei...@mail.idt.net> wrote in article
<326E9B...@mail.idt.net>...
> I got the crack program but i didnt get quake from the cd just from ftp
> could the qstart program work for my quake and could send it to me via
> email!?
> thanks
>
I think I have the same problem. I got the shareware CD but once installed
there is no challenge code to be found any where! Can you register through
the console? Please e-mail me a solution.
Baz
MERRY XMAS wrote: Tripe
yes please send me a FISHING HELMET!
>