Hello.
Connected to the DNS-327L on the firmware Alt-F 1.0 USB box designed for 5 disks ORICO 6558US3 on the JMB391 controller.
All disks work, but the SMART is not displayed in the web interface.
If you write through the command line
smartctl --scan, then these drives are also not visible.
[root@]# smartctl --scan
/dev/sda -d scsi # /dev/sda, SCSI device
/dev/sdb -d scsi # /dev/sdb, SCSI deviceIf you write a command with the
-d sat option, then all disks are visible.
[root@]# smartctl -d sat --scan
/dev/sda -d scsi # /dev/sda, SCSI device
/dev/sdb -d scsi # /dev/sdb, SCSI device
/dev/sdc -d scsi # /dev/sdc, SCSI device
/dev/sdd -d scsi # /dev/sdd, SCSI device
/dev/sde -d scsi # /dev/sde, SCSI device
/dev/sdf -d scsi # /dev/sdf, SCSI device
/dev/sdg -d scsi # /dev/sdg, SCSI deviceThe question is how do I change the system code so that it uses
smartctl work with the
-d sat option.
Or maybe some script can be written.