PBz
Sep 3, 2020, 11:09:40 PM9/3/20
to Alt-F
Hello,
I need help with my Dnr-322l HW A2 Fw 1.40
Alt-F-1.0-DNR-322L-rev-Ax.bin was installed
I need to return the original firmware, but when installing firmare, Alt-F recognized my equipment with a DNS-320Ax, so I installed DNS-320_REVA_FIRMWARE_2.00, as shown below.
After the reboot, the equipment has the Power led flashing constantly and does not set an IP.
So I have no access. Is there any way to reverse?
Viktor
Sep 7, 2020, 8:21:48 PM9/7/20
to Alt-F
You should have installed Alt-F-1.0.1-DNR-322L-rev-Ax.bin instead. It has the fixes specifically for the DNR-322L.
You would need a serial connection to unbrick your box. Refer to this thread:
https://groups.google.com/g/alt-f/c/fsZew9oHScY/m/Br9-VoH4AwAJ
PBz
Sep 14, 2020, 1:30:58 PM9/14/20
to Alt-F
ola,
I appreciate the attention I will provide the serial cable. After welding this cable which program I will use to communicate with the DNR. if i have a step by step because I have no knowledge in electronics.
I don't speak English I'm using an online translator sorry if the text is not clear.
Jeremy Laidman
Sep 15, 2020, 1:05:49 AM9/15/20
to al...@googlegroups.com
Hola
My preference is to use PuTTY on Windows to connect to the serial port.
Will you connect from Windows or from Linux?
Here are some tutorials:
and a video:
Cheers
Jeremy
--
You received this message because you are subscribed to the Google Groups "Alt-F" group.
To unsubscribe from this group and stop receiving emails from it, send an email to alt-f+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/alt-f/a8a85bec-6a53-403f-a93c-4318b4dbd807n%40googlegroups.com.
Reply all
Reply to author
Forward
0 new messages