how to start twonky on Alt-F 0.1RC3 with ffp-0.7

[Ehab Aboudaya]

hi

I have Alt-F 0.1RC3 flashed, and installed ffp-0.7 and have the twonky-dns323-7.2.1 extracted and some config done. I am familiar with twonky on dns323 with ffp plugin.

My case: when i start twonky this way

$sh /ffp/start/twonky.sh start

the server starts and shows:

3657 root     /ffp/opt/twonky/twonkystarter -logfile /ffp/opt/twonky/data/TwonkyServer-log.txt -appdata /ffp/opt/twonky/data/

 3658 root     [twonkyserver]

 3662 root     grep twonky

but a 404 for the IP:9000 webpage for twonky and the log file above does not exists or even created. twonky listens or should to port 9000 but not the case if i do a 

$netstat -nat | grep LISTEN

My question(s):

1- did anyone managed to run twonky sever with alt-f flashed.

2- can it be something preventing port opening "listening"?

3- the start script does a 

route add -net 224.0.0.0 netmask 240.0.0.0 dev egiga0

running the above line alone gives " route: SIOCADDRT: No such device "

can it be alt-f needs a change to allow a device, sorry i have no much experience with networking

any hints / directions are mostly welcome : D

ehab

[João Cardoso]

Please search for twonky in this forum, you will get the answer.

[Ehab Aboudaya]

hi João

My search gave only this result

http://forum.dsmg600.info/viewtopic.php?id=6660
Can you please tell me otherwise if you can kindly copy and paste the directions maybe i can't access.

Thanks in advance for any reply.

regards

ehab

[João Cardoso]

On Thursday, October 10, 2013 5:46:48 PM UTC+1, Ehab Aboudaya wrote:

hi João

My search gave only this result

http://forum.dsmg600.info/viewtopic.php?id=6660

Not the  forum.dsmg600.info forum, the Alt-F forum, https://groups.google.com/forum/#!forum/alt-f:

There is a search form at the page top, which gives as results: https://groups.google.com/forum/#!searchin/alt-f/twonky

[Jacob Griffiths]

Hi Joao

I have searched this forum (Alt-f) and i can find very little about the installation of twonky on a dns-323 with Alt-F.  I had the same issue above, but it seemed as though Alt-F renamed the ethernet port from egiga0 (the dlink name) to eth0 (Alt-fname).  Changing this seemed to help me get past this error, though i still have not gotten twonky up and running.

[João Cardoso]

On Thursday, February 26, 2015 at 12:07:50 AM UTC, Jacob Griffiths wrote:

Hi Joao

I have searched this forum (Alt-f) and i can find very little about the installation of twonky on a dns-323 with Alt-F.

Can't be done, you have not searched well enough

Programs not compiled for Alt-F will not work under Alt-F! As a rule of thumb, this happens if you see '.com' at the download site URL and downloads offered for several systems, such as MS-Win, Mac, Sinology, etc, etc. If downloads appears for the DNS-xxx, they will only work under the D-Link firmware.