Trying to run Disk Wizard but error "No Disks Found!"

424 views
Skip to first unread message

jlsf

unread,
Jan 28, 2013, 6:21:06 PM1/28/13
to al...@googlegroups.com
I have RC2 flashed onto my DNS-323 and have installed 2 new 2TB drives but when I try to run the wizard, I get a "No Disks Found!" message.

I can go to the Partitioner page and it sees both drives correctly. I could try to partition the drives manually, but I kind of figured that is what the wizard is for.

I feel like I'm missing something obvious here, but just do not see it... thanks for any help.

Joao Cardoso

unread,
Jan 28, 2013, 7:56:40 PM1/28/13
to al...@googlegroups.com


On Monday, January 28, 2013 11:21:06 PM UTC, jlsf wrote:
I have RC2 flashed onto my DNS-323 and have installed 2 new 2TB drives but when I try to run the wizard, I get a "No Disks Found!" message.

hmmm, looks like the wizard drink too much magic potion :-)
 

I can go to the Partitioner page and it sees both drives correctly. I could try to partition the drives manually, but I kind of figured that is what the wizard is for.

Of course. The disks are brand new? No partition table at all?
Can you please telnet or ssh the box as the 'root' user, same password as the one of the web UI, and post the output of the following commands:

ls -l /dev/sd*
fdisk -l

Can you please go through all pages and report which of them shows the same message?
Status, Disk Utilities, RAID, Packages (both ffp and Alt-F), Filesystem Maintenance, Setup->Users are some

Can you please also attach the System and Kernel logs (from System->Utilities, View Logs)?

I feel like I'm missing something obvious here, but just do not see it... thanks for any help.

No, *I* miss something.
Both the Disk Wizard and the Disk Partitioner uses the same code to detect disks...

Thanks,
Joao 
Message has been deleted

Joao Cardoso

unread,
Jan 29, 2013, 10:45:33 AM1/29/13
to al...@googlegroups.com
[This post was classified as SPAM and sent to the moderator list, I approved it but now it appears as being deleted!
I will try now a copy/paste
Google Groups #!$*#]

Here is a screenshot from ls and fdisk:
# ls
# ls -l /dev/sd*
brw-rw----    1 root     root        8,   0 Jan 29 04:24 /dev/sda
brw-rw----    1 root     root        8,  16 Jan 29 04:24 /dev/sdb
# fdisk -l

Disk /dev/mtdblock0: 0 MB, 65536 bytes
255 heads, 63 sectors/track, 0 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/mtdblock0 doesn't contain a valid partition table

Disk /dev/mtdblock1: 0 MB, 65536 bytes
255 heads, 63 sectors/track, 0 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/mtdblock1 doesn't contain a valid partition table

Disk /dev/mtdblock2: 1 MB, 1572864 bytes
255 heads, 63 sectors/track, 0 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/mtdblock2 doesn't contain a valid partition table

Disk /dev/mtdblock3: 6 MB, 6488064 bytes
255 heads, 63 sectors/track, 0 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/mtdblock3 doesn't contain a valid partition table

Disk /dev/mtdblock4: 0 MB, 196608 bytes
255 heads, 63 sectors/track, 0 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/mtdblock4 doesn't contain a valid partition table

Disk /dev/sda: 2000.3 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/sda doesn't contain a valid partition table

Disk /dev/sdb: 2000.3 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/sdb doesn't contain a valid partition table
# 

The following pages show the proper disc info:
   Status, Utilities
The following show the "No disks found!" error:
   Wizard, Packages Alt-F and ffp
Raid does not show the error, but the dropdowns do not have any options.
Users shows "No users directory found, create it in:", but the dropdown has no options.
Filesystem Maintenance does not show an error.

Logs files follow:

Kernel:

Kernel Log

When done you should save settings help
Enter a search string (or a grep regular expression)
Linux version 2.6.35.14 (jcard@silver) (gcc version 4.3.3 (GCC) ) #1 Tue Feb 21 15:39:06 WET 2012
CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=a0053177
CPU: VIVT data cache, VIVT instruction cache
Machine: D-Link DNS-323
Clearing invalid memory bank 0KB@0xffffffff
Clearing invalid memory bank 0KB@0xffffffff
Clearing invalid memory bank 0KB@0xffffffff
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x00000000
Ignoring unrecognised tag 0x41000403
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 16384
free_area_init_node: node 0, pgdat c02ff55c, node_mem_map c0310000
  Normal zone: 128 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 16256 pages, LIFO batch:3
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Kernel command line: root=/dev/ram console=ttyS0,115200 :::DB88FXX81:egiga0:none
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 55596k/55596k available, 9940k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
    vmalloc : 0xc4800000 - 0xfd800000   ( 912 MB)
    lowmem  : 0xc0000000 - 0xc4000000   (  64 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .init : 0xc0008000 - 0xc0026000   ( 120 kB)
      .text : 0xc0026000 - 0xc02d2000   (2736 kB)
      .data : 0xc02ea000 - 0xc02ffb80   (  87 kB)
NR_IRQS:64
Calibrating delay loop... 332.59 BogoMIPS (lpj=1662976)
pid_max: default: 4096 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
Orion ID: MV88F5182-A2. TCLK=166666667.
DNS-323: Identified HW revision B1
DNS-323: Found ethernet MAC address: 00:21:91:89:14:c4.
bio: create slab  at 0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switching to clocksource orion_clocksource
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
PCI: CLS 0 bytes, default 32
Unpacking initramfs...
Freeing initrd memory: 6240K
squashfs: version 4.0 (2009/01/31) Phillip Lougher
aufs 2-standalone.tree-35-20100809
msgmni has been set to 120
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A
console [ttyS0] enabled
loop: module loaded
sata_mv sata_mv.0: version 1.28
sata_mv sata_mv.0: slots 32 ports 2
scsi0 : sata_mv
scsi1 : sata_mv
ata1: SATA max UDMA/133 irq 29
ata2: SATA max UDMA/133 irq 29
physmap platform flash device: 00800000 at f4000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cmdlinepart partition parsing not available
RedBoot partition parsing not available
Using physmap partition information
Creating 5 MTD partitions on "physmap-flash.0":
0x000000000000-0x000000010000 : "MTD1"
0x000000010000-0x000000020000 : "MTD2"
0x000000020000-0x0000001a0000 : "Linux Kernel"
0x0000001a0000-0x0000007d0000 : "File System"
0x0000007d0000-0x000000800000 : "u-boot"
MV-643xx 10/100/1000 ethernet driver version 1.4
mv643xx_eth smi: probed
net eth0: port 0 with MAC address 00:21:91:89:14:c4
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
orion-ehci orion-ehci.0: Marvell Orion EHCI
orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
orion-ehci orion-ehci.0: irq 17, io mem 0xf1050000
orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: gpio-keys as /class/input/input0
i2c /dev entries driver
rtc-m41t80 0-0068: chip found, driver version 0.05
rtc-m41t80 0-0068: rtc core: registered m41t80 as rtc0
lm75 0-0048: hwmon1: sensor 'lm75'
md: linear personality registered for level -1
md: raid1 personality registered for level 1
Registered led device: power:blue
Registered led device: right:amber
Registered led device: left:amber
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
rtc-m41t80 0-0068: setting system clock to 2013-01-29 04:24:44 UTC (1359433484)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-9: WDC WD20EFRX-68AX9N0, 80.00A80, max UDMA/133
ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD20EFRX-68A 80.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: unknown partition table
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-9: WDC WD20EFRX-68AX9N0, 80.00A80, max UDMA/133
ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      WDC WD20EFRX-68A 80.0 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: unknown partition table
sd 1:0:0:0: [sdb] Attached SCSI disk
Freeing init memory: 120K
aufs test_add:253:mount[53]: uid/gid/perm /tmproot/rootsq 0/0/0777, 0/0/0755
eth0: link up, 100 Mb/s, full duplex, flow control disabled
usbcore: registered new interface driver usblp

SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switching to clocksource orion_clocksource
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
PCI: CLS 0 bytes, default 32
Unpacking initramfs...
Freeing initrd memory: 6240K
squashfs: version 4.0 (2009/01/31) Phillip Lougher
aufs 2-standalone.tree-35-20100809
msgmni has been set to 120
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A
console [ttyS0] enabled
loop: module loaded
sata_mv sata_mv.0: version 1.28
sata_mv sata_mv.0: slots 32 ports 2
scsi0 : sata_mv
scsi1 : sata_mv
ata1: SATA max UDMA/133 irq 29
ata2: SATA max UDMA/133 irq 29
physmap platform flash device: 00800000 at f4000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cmdlinepart partition parsing not available
RedBoot partition parsing not available
Using physmap partition information
Creating 5 MTD partitions on "physmap-flash.0":
0x000000000000-0x000000010000 : "MTD1"
0x000000010000-0x000000020000 : "MTD2"
0x000000020000-0x0000001a0000 : "Linux Kernel"
0x0000001a0000-0x0000007d0000 : "File System"
0x0000007d0000-0x000000800000 : "u-boot"
MV-643xx 10/100/1000 ethernet driver version 1.4
mv643xx_eth smi: probed
net eth0: port 0 with MAC address 00:21:91:89:14:c4
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
orion-ehci orion-ehci.0: Marvell Orion EHCI
orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
orion-ehci orion-ehci.0: irq 17, io mem 0xf1050000
orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: gpio-keys as /class/input/input0
i2c /dev entries driver
rtc-m41t80 0-0068: chip found, driver version 0.05
rtc-m41t80 0-0068: rtc core: registered m41t80 as rtc0
lm75 0-0048: hwmon1: sensor 'lm75'
md: linear personality registered for level -1
md: raid1 personality registered for level 1
Registered led device: power:blue
Registered led device: right:amber
Registered led device: left:amber
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
rtc-m41t80 0-0068: setting system clock to 2013-01-29 04:24:44 UTC (1359433484)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-9: WDC WD20EFRX-68AX9N0, 80.00A80, max UDMA/133
ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD20EFRX-68A 80.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: unknown partition table
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-9: WDC WD20EFRX-68AX9N0, 80.00A80, max UDMA/133
ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      WDC WD20EFRX-68A 80.0 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: unknown partition table
sd 1:0:0:0: [sdb] Attached SCSI disk
Freeing init memory: 120K
aufs test_add:253:mount[53]: uid/gid/perm /tmproot/rootsq 0/0/0777, 0/0/0755
eth0: link up, 100 Mb/s, full duplex, flow control disabled
usbcore: registered new interface driver usblp
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switching to clocksource orion_clocksource
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
PCI: CLS 0 bytes, default 32
Unpacking initramfs...
Freeing initrd memory: 6240K
squashfs: version 4.0 (2009/01/31) Phillip Lougher
aufs 2-standalone.tree-35-20100809
msgmni has been set to 120
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A
console [ttyS0] enabled
loop: module loaded
sata_mv sata_mv.0: version 1.28
sata_mv sata_mv.0: slots 32 ports 2
scsi0 : sata_mv
scsi1 : sata_mv
ata1: SATA max UDMA/133 irq 29
ata2: SATA max UDMA/133 irq 29
physmap platform flash device: 00800000 at f4000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cmdlinepart partition parsing not available
RedBoot partition parsing not available
Using physmap partition information
Creating 5 MTD partitions on "physmap-flash.0":
0x000000000000-0x000000010000 : "MTD1"
0x000000010000-0x000000020000 : "MTD2"
0x000000020000-0x0000001a0000 : "Linux Kernel"
0x0000001a0000-0x0000007d0000 : "File System"
0x0000007d0000-0x000000800000 : "u-boot"
MV-643xx 10/100/1000 ethernet driver version 1.4
mv643xx_eth smi: probed
net eth0: port 0 with MAC address 00:21:91:89:14:c4
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
orion-ehci orion-ehci.0: Marvell Orion EHCI
orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
orion-ehci orion-ehci.0: irq 17, io mem 0xf1050000
orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: gpio-keys as /class/input/input0
i2c /dev entries driver
rtc-m41t80 0-0068: chip found, driver version 0.05
rtc-m41t80 0-0068: rtc core: registered m41t80 as rtc0
lm75 0-0048: hwmon1: sensor 'lm75'
md: linear personality registered for level -1
md: raid1 personality registered for level 1
Registered led device: power:blue
Registered led device: right:amber
Registered led device: left:amber
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
rtc-m41t80 0-0068: setting system clock to 2013-01-29 04:24:44 UTC (1359433484)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-9: WDC WD20EFRX-68AX9N0, 80.00A80, max UDMA/133
ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD20EFRX-68A 80.0 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: unknown partition table
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-9: WDC WD20EFRX-68AX9N0, 80.00A80, max UDMA/133
ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      WDC WD20EFRX-68A 80.0 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: unknown partition table
sd 1:0:0:0: [sdb] Attached SCSI disk
Freeing init memory: 120K
aufs test_add:253:mount[53]: uid/gid/perm /tmproot/rootsq 0/0/0777, 0/0/0755
eth0: link up, 100 Mb/s, full duplex, flow control disabled
usbcore: registered new interface driver usblp

System Log:
Jan 29 04:25:03 DNS-323 syslog.info syslogd started: BusyBox v1.19.3
Jan 29 04:25:03 DNS-323 user.notice kernel: klogd started: BusyBox v1.19.3 (2012-02-21 15:37:53 WET)
Jan 29 04:25:03 DNS-323 user.notice kernel: Linux version 2.6.35.14 (jcard@silver) (gcc version 4.3.3 (GCC) ) #1 Tue Feb 21 15:39:06 WET 2012
Jan 29 04:25:03 DNS-323 user.warn kernel: CPU: Feroceon [41069260] revision 0 (ARMv5TEJ), cr=a0053177
Jan 29 04:25:03 DNS-323 user.warn kernel: CPU: VIVT data cache, VIVT instruction cache
Jan 29 04:25:03 DNS-323 user.warn kernel: Machine: D-Link DNS-323
Jan 29 04:25:03 DNS-323 user.warn kernel: Clearing invalid memory bank 0KB@0xffffffff
Jan 29 04:25:03 DNS-323 user.warn kernel: Ignoring unrecognised tag 0x00000000
Jan 29 04:25:03 DNS-323 user.notice root: Starting syslogd: OK. Starting klogd: OK.
Jan 29 04:25:03 DNS-323 user.warn kernel: Ignoring unrecognised tag 0x00000000
Jan 29 04:25:03 DNS-323 user.warn kernel: Ignoring unrecognised tag 0x41000403
Jan 29 04:25:03 DNS-323 user.warn kernel: Memory policy: ECC disabled, Data cache writeback
Jan 29 04:25:03 DNS-323 user.debug kernel: On node 0 totalpages: 16384
Jan 29 04:25:03 DNS-323 user.debug kernel: free_area_init_node: node 0, pgdat c02ff55c, node_mem_map c0310000
Jan 29 04:25:03 DNS-323 user.debug kernel:   Normal zone: 128 pages used for memmap
Jan 29 04:25:03 DNS-323 user.debug kernel:   Normal zone: 0 pages reserved
Jan 29 04:25:03 DNS-323 user.debug kernel:   Normal zone: 16256 pages, LIFO batch:3
Jan 29 04:25:03 DNS-323 user.warn kernel: Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Jan 29 04:25:03 DNS-323 user.notice kernel: Kernel command line: root=/dev/ram console=ttyS0,115200 :::DB88FXX81:egiga0:none
Jan 29 04:25:03 DNS-323 user.info kernel: PID hash table entries: 256 (order: -2, 1024 bytes)
Jan 29 04:25:03 DNS-323 user.info kernel: Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Jan 29 04:25:03 DNS-323 user.info kernel: Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Jan 29 04:25:03 DNS-323 user.info kernel: Memory: 64MB = 64MB total
Jan 29 04:25:03 DNS-323 user.notice kernel: Memory: 55596k/55596k available, 9940k reserved, 0K highmem
Jan 29 04:25:03 DNS-323 user.notice kernel: Virtual kernel memory layout:
Jan 29 04:25:03 DNS-323 user.notice kernel:     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
Jan 29 04:25:03 DNS-323 user.notice kernel:     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
Jan 29 04:25:03 DNS-323 user.notice kernel:     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
Jan 29 04:25:03 DNS-323 user.notice kernel:     vmalloc : 0xc4800000 - 0xfd800000   ( 912 MB)
Jan 29 04:25:03 DNS-323 user.notice kernel:     lowmem  : 0xc0000000 - 0xc4000000   (  64 MB)
Jan 29 04:25:03 DNS-323 user.notice kernel:     modules : 0xbf000000 - 0xc0000000   (  16 MB)
Jan 29 04:25:03 DNS-323 user.notice kernel:       .init : 0xc0008000 - 0xc0026000   ( 120 kB)
Jan 29 04:25:03 DNS-323 user.notice kernel:       .text : 0xc0026000 - 0xc02d2000   (2736 kB)
Jan 29 04:25:03 DNS-323 user.notice kernel:       .data : 0xc02ea000 - 0xc02ffb80   (  87 kB)
Jan 29 04:25:03 DNS-323 user.info kernel: NR_IRQS:64
Jan 29 04:25:03 DNS-323 user.info kernel: Calibrating delay loop... 332.59 BogoMIPS (lpj=1662976)
Jan 29 04:25:03 DNS-323 user.info kernel: pid_max: default: 4096 minimum: 301
Jan 29 04:25:03 DNS-323 user.warn kernel: Mount-cache hash table entries: 512
Jan 29 04:25:03 DNS-323 user.info kernel: CPU: Testing write buffer coherency: ok
Jan 29 04:25:03 DNS-323 user.info kernel: NET: Registered protocol family 16
Jan 29 04:25:03 DNS-323 user.info kernel: Orion ID: MV88F5182-A2. TCLK=166666667.
Jan 29 04:25:03 DNS-323 user.info kernel: DNS-323: Identified HW revision B1
Jan 29 04:25:03 DNS-323 user.warn kernel: DNS-323: Found ethernet MAC address: 00:21:91:89:14:c4.
Jan 29 04:25:03 DNS-323 user.warn kernel: bio: create slab  at 0
Jan 29 04:25:03 DNS-323 user.notice kernel: SCSI subsystem initialized
Jan 29 04:25:03 DNS-323 user.debug kernel: libata version 3.00 loaded.
Jan 29 04:25:03 DNS-323 user.info kernel: usbcore: registered new interface driver usbfs
Jan 29 04:25:03 DNS-323 user.info kernel: usbcore: registered new interface driver hub
Jan 29 04:25:03 DNS-323 user.info kernel: usbcore: registered new device driver usb
Jan 29 04:25:03 DNS-323 user.info kernel: Switching to clocksource orion_clocksource
Jan 29 04:25:03 DNS-323 user.info kernel: NET: Registered protocol family 2
Jan 29 04:25:03 DNS-323 user.info kernel: IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan 29 04:25:03 DNS-323 user.info kernel: TCP established hash table entries: 2048 (order: 2, 16384 bytes)
Jan 29 04:25:03 DNS-323 user.info kernel: TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
Jan 29 04:25:03 DNS-323 user.info kernel: TCP: Hash tables configured (established 2048 bind 2048)
Jan 29 04:25:03 DNS-323 user.info kernel: TCP reno registered
Jan 29 04:25:03 DNS-323 user.info kernel: NET: Registered protocol family 1
Jan 29 04:25:03 DNS-323 user.debug kernel: PCI: CLS 0 bytes, default 32
Jan 29 04:25:03 DNS-323 user.info kernel: Unpacking initramfs...
Jan 29 04:25:03 DNS-323 user.info kernel: Freeing initrd memory: 6240K
Jan 29 04:25:03 DNS-323 user.info kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher
Jan 29 04:25:03 DNS-323 user.info kernel: aufs 2-standalone.tree-35-20100809
Jan 29 04:25:03 DNS-323 user.info kernel: msgmni has been set to 120
Jan 29 04:25:03 DNS-323 user.info kernel: io scheduler noop registered
Jan 29 04:25:03 DNS-323 user.info kernel: io scheduler deadline registered
Jan 29 04:25:03 DNS-323 user.info kernel: io scheduler cfq registered (default)
Jan 29 04:25:03 DNS-323 user.info kernel: Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
Jan 29 04:25:03 DNS-323 user.info kernel: serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A
Jan 29 04:25:03 DNS-323 user.info kernel: console [ttyS0] enabled
Jan 29 04:25:03 DNS-323 user.info kernel: loop: module loaded
Jan 29 04:25:03 DNS-323 user.info kernel: sata_mv sata_mv.0: version 1.28
Jan 29 04:25:03 DNS-323 user.info kernel: sata_mv sata_mv.0: slots 32 ports 2
Jan 29 04:25:03 DNS-323 user.info kernel: scsi0 : sata_mv
Jan 29 04:25:03 DNS-323 user.info kernel: scsi1 : sata_mv
Jan 29 04:25:03 DNS-323 user.info kernel: ata1: SATA max UDMA/133 irq 29
Jan 29 04:25:03 DNS-323 user.info kernel: ata2: SATA max UDMA/133 irq 29
Jan 29 04:25:03 DNS-323 user.notice kernel: physmap platform flash device: 00800000 at f4000000
Jan 29 04:25:03 DNS-323 user.info kernel: physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank
Jan 29 04:25:03 DNS-323 user.info kernel: Amd/Fujitsu Extended Query Table at 0x0040
Jan 29 04:25:03 DNS-323 user.notice kernel: number of CFI chips: 1
Jan 29 04:25:03 DNS-323 user.notice kernel: cmdlinepart partition parsing not available
Jan 29 04:25:03 DNS-323 user.notice kernel: RedBoot partition parsing not available
Jan 29 04:25:03 DNS-323 user.notice kernel: Using physmap partition information
Jan 29 04:25:03 DNS-323 user.notice kernel: Creating 5 MTD partitions on "physmap-flash.0":
Jan 29 04:25:03 DNS-323 user.notice kernel: 0x000000000000-0x000000010000 : "MTD1"
Jan 29 04:25:03 DNS-323 user.notice kernel: 0x000000010000-0x000000020000 : "MTD2"
Jan 29 04:25:03 DNS-323 user.notice kernel: 0x000000020000-0x0000001a0000 : "Linux Kernel"
Jan 29 04:25:03 DNS-323 user.notice kernel: 0x0000001a0000-0x0000007d0000 : "File System"
Jan 29 04:25:03 DNS-323 user.notice kernel: 0x0000007d0000-0x000000800000 : "u-boot"
Jan 29 04:25:03 DNS-323 user.notice kernel: MV-643xx 10/100/1000 ethernet driver version 1.4
Jan 29 04:25:03 DNS-323 user.info kernel: mv643xx_eth smi: probed
Jan 29 04:25:03 DNS-323 user.notice kernel: net eth0: port 0 with MAC address 00:21:91:89:14:c4
Jan 29 04:25:03 DNS-323 user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 29 04:25:03 DNS-323 user.info kernel: orion-ehci orion-ehci.0: Marvell Orion EHCI
Jan 29 04:25:03 DNS-323 user.info kernel: orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
Jan 29 04:25:03 DNS-323 user.info kernel: orion-ehci orion-ehci.0: irq 17, io mem 0xf1050000
Jan 29 04:25:03 DNS-323 user.info kernel: orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
Jan 29 04:25:03 DNS-323 user.info kernel: hub 1-0:1.0: USB hub found
Jan 29 04:25:03 DNS-323 user.info kernel: hub 1-0:1.0: 1 port detected
Jan 29 04:25:03 DNS-323 user.info kernel: Initializing USB Mass Storage driver...
Jan 29 04:25:03 DNS-323 user.info kernel: usbcore: registered new interface driver usb-storage
Jan 29 04:25:03 DNS-323 user.info kernel: USB Mass Storage support registered.
Jan 29 04:25:03 DNS-323 user.info kernel: input: gpio-keys as /class/input/input0
Jan 29 04:25:03 DNS-323 user.info kernel: i2c /dev entries driver
Jan 29 04:25:03 DNS-323 user.info kernel: rtc-m41t80 0-0068: chip found, driver version 0.05
Jan 29 04:25:03 DNS-323 user.info kernel: rtc-m41t80 0-0068: rtc core: registered m41t80 as rtc0
Jan 29 04:25:03 DNS-323 user.info kernel: lm75 0-0048: hwmon1: sensor 'lm75'
Jan 29 04:25:03 DNS-323 user.info kernel: md: linear personality registered for level -1
Jan 29 04:25:03 DNS-323 user.info kernel: md: raid1 personality registered for level 1
Jan 29 04:25:03 DNS-323 user.debug kernel: Registered led device: power:blue
Jan 29 04:25:03 DNS-323 user.debug kernel: Registered led device: right:amber
Jan 29 04:25:03 DNS-323 user.debug kernel: Registered led device: left:amber
Jan 29 04:25:03 DNS-323 user.info kernel: usbcore: registered new interface driver usbhid
Jan 29 04:25:03 DNS-323 user.info kernel: usbhid: USB HID core driver
Jan 29 04:25:03 DNS-323 user.info kernel: TCP cubic registered
Jan 29 04:25:03 DNS-323 user.info kernel: NET: Registered protocol family 17
Jan 29 04:25:03 DNS-323 user.info kernel: rtc-m41t80 0-0068: setting system clock to 2013-01-29 04:24:44 UTC (1359433484)
Jan 29 04:25:03 DNS-323 user.info kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan 29 04:25:03 DNS-323 user.info kernel: ata1.00: ATA-9: WDC WD20EFRX-68AX9N0, 80.00A80, max UDMA/133
Jan 29 04:25:03 DNS-323 user.info kernel: ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Jan 29 04:25:03 DNS-323 user.info kernel: ata1.00: configured for UDMA/133
Jan 29 04:25:03 DNS-323 user.notice kernel: scsi 0:0:0:0: Direct-Access     ATA      WDC WD20EFRX-68A 80.0 PQ: 0 ANSI: 5
Jan 29 04:25:03 DNS-323 user.notice kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan 29 04:25:03 DNS-323 user.notice kernel: sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
Jan 29 04:25:03 DNS-323 user.notice kernel: sd 0:0:0:0: [sda] 4096-byte physical blocks
Jan 29 04:25:03 DNS-323 user.notice kernel: sd 0:0:0:0: [sda] Write Protect is off
Jan 29 04:25:03 DNS-323 user.debug kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jan 29 04:25:03 DNS-323 user.notice kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan 29 04:25:03 DNS-323 user.info kernel:  sda: unknown partition table
Jan 29 04:25:03 DNS-323 user.notice kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Jan 29 04:25:03 DNS-323 user.info kernel: ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan 29 04:25:03 DNS-323 user.info kernel: ata2.00: ATA-9: WDC WD20EFRX-68AX9N0, 80.00A80, max UDMA/133
Jan 29 04:25:03 DNS-323 user.info kernel: ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Jan 29 04:25:03 DNS-323 user.info kernel: ata2.00: configured for UDMA/133
Jan 29 04:25:03 DNS-323 user.notice kernel: scsi 1:0:0:0: Direct-Access     ATA      WDC WD20EFRX-68A 80.0 PQ: 0 ANSI: 5
Jan 29 04:25:03 DNS-323 user.notice kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0
Jan 29 04:25:03 DNS-323 user.notice root: Starting urandom: OK.
Jan 29 04:25:03 DNS-323 user.notice kernel: sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
Jan 29 04:25:03 DNS-323 user.notice kernel: sd 1:0:0:0: [sdb] 4096-byte physical blocks
Jan 29 04:25:03 DNS-323 user.notice kernel: sd 1:0:0:0: [sdb] Write Protect is off
Jan 29 04:25:03 DNS-323 user.debug kernel: sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Jan 29 04:25:03 DNS-323 user.notice kernel: sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan 29 04:25:03 DNS-323 user.info kernel:  sdb: unknown partition table
Jan 29 04:25:03 DNS-323 user.notice kernel: sd 1:0:0:0: [sdb] Attached SCSI disk
Jan 29 04:25:03 DNS-323 user.info kernel: Freeing init memory: 120K
Jan 29 04:25:03 DNS-323 user.warn kernel: aufs test_add:253:mount[53]: uid/gid/perm /tmproot/rootsq 0/0/0777, 0/0/0755
Jan 29 04:25:03 DNS-323 user.info kernel: eth0: link up, 100 Mb/s, full duplex, flow control disabled
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: Starting
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: reading /etc/sysctrl.conf
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: cant open /etc/sysctrl.conf: No such file or directory Using defaults
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: args.lo_fan=2000
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: args.hi_fan=5000
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: args.lo_temp=40
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: args.hi_temp=50
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: args.mail=1
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: args.recovery=1
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: args.fan_off_temp=38
Jan 29 04:25:03 DNS-323 user.notice root: Starting sysctrl: OK.
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: args.max_fan_speed=5500
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: args.crit_temp=54
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: args.warn_temp=52
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: args.crit_temp_command="/sbin/poweroff"
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: args.warn_temp_command="(null)"
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: args.front_button_command1="(null)"
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: args.front_button_command2="(null)"
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: args.back_button_command="(null)"
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: right_dev disk (sda) wakeup
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: left_dev disk (sdb) wakeup
Jan 29 04:25:04 DNS-323 user.info kernel: usbcore: registered new interface driver usblp
Jan 29 04:25:17 DNS-323 user.notice root: dropbear: generating rsa key...  dropbear: generating dsa key...  Starting inetd: OK.
Jan 29 04:25:22 DNS-323 user.notice root: Starting nmbd: OK. Starting smbd: OK.
Jan 29 04:25:22 DNS-323 user.notice root: Starting user: OK.
Jan 29 04:25:22 DNS-323 user.notice root: ****** Boot Log start ******
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:24:46 syslogd started: BusyBox v1.19.3
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:24:47 root: fsck 1.41.14 (22-Dec-2010) fsck.minix: BusyBox v1.19.3 (2012-02-21 15:37:53 WET) /dev/mtdblock0 is clean, check is skipped
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:24:47 root: FIXME: Waiting 3 sec for kernel enumeration to finish...
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:24:50 root: FIXME: stop waiting.
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:24:56 udhcpc[329]: udhcpc (v1.19.3) started
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:24:56 udhcpc[329]: Sending discover...
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:24:59 udhcpc[329]: Sending discover...
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:02 udhcpc[329]: Sending discover...
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:02 udhcpc[329]: Sending select for 192.168.2.57...
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:02 udhcpc[329]: Lease of 192.168.2.57 obtained, lease time 86400
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:02 root: IP from dhcp server
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc: Deconfiguring eth0
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc: udhcpc environment:
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    opt58=0000a8c0
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    router=192.168.2.1
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    subnet=255.255.255.0
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    opt59=00012750
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    METHOD=dhcp
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    MODE=start
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    interface=eth0
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    siaddr=192.168.2.1
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    dns=192.168.2.1
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    ADDRFAM=inet
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    serverid=192.168.2.1
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    broadcast=192.168.2.255
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    IF_CLIENT=udhcpc
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    PATH=/sbin:/usr/sbin:/bin:/usr/bin
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    ip=192.168.2.57
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    lease=86400
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    mask=24
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    IFACE=eth0
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    hostname=DNS-323
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    PWD=/
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    opt53=05
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc: Updating /etc/hosts
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc: Updating /etc/httpd.conf
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc: Updating /etc/samba/smb.conf
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc: Updating default route
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc: Updating /etc/resolv.conf
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc: adding dns 192.168.2.1
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 syslogd exiting
Jan 29 04:25:22 DNS-323 user.notice root: ****** Boot Log end ******
Jan 29 04:25:22 DNS-323 daemon.info init: starting pid 497, tty '/dev/null': '/bin/touch /var/log/messages'
Jan 29 04:25:22 DNS-323 daemon.info init: starting pid 498, tty '/dev/ttyS0': '/sbin/getty -n -l /bin/sh -L ttyS0 115200 vt100'
Jan 29 04:25:34 DNS-323 daemon.info sysctrl: temp=33.8	 fan=0
Jan 29 04:31:34 DNS-323 daemon.info sysctrl: temp=33.4	 fan=0
Jan 29 04:41:39 DNS-323 user.info syslog: Password for 'root' changed
Jan 29 04:46:46 DNS-323 authpriv.info dropbear[1093]: Child connection from 192.168.2.2:55137
Jan 29 04:46:50 DNS-323 authpriv.notice dropbear[1093]: Password auth succeeded for 'root' from 192.168.2.2:55137
Jan 29 04:46:50 DNS-323 authpriv.warn dropbear[1094]: wtmp_write: problem writing /var/log/wtmp: No such file or directory
Jan 29 04:52:35 DNS-323 daemon.info sysctrl: temp=33.7	 fan=0
Jan 29 04:58:35 DNS-323 daemon.info sysctrl: temp=34.1	 fan=0
Jan 29 04:59:05 DNS-323 daemon.info sysctrl: temp=34.3	 fan=0

Jan 29 04:25:03 DNS-323 user.notice kernel: SCSI subsystem initialized
Jan 29 04:25:03 DNS-323 user.debug kernel: libata version 3.00 loaded.
Jan 29 04:25:03 DNS-323 user.info kernel: usbcore: registered new interface driver usbfs
Jan 29 04:25:03 DNS-323 user.info kernel: usbcore: registered new interface driver hub
Jan 29 04:25:03 DNS-323 user.info kernel: usbcore: registered new device driver usb
Jan 29 04:25:03 DNS-323 user.info kernel: Switching to clocksource orion_clocksource
Jan 29 04:25:03 DNS-323 user.info kernel: NET: Registered protocol family 2
Jan 29 04:25:03 DNS-323 user.info kernel: IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan 29 04:25:03 DNS-323 user.info kernel: TCP established hash table entries: 2048 (order: 2, 16384 bytes)
Jan 29 04:25:03 DNS-323 user.info kernel: TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
Jan 29 04:25:03 DNS-323 user.info kernel: TCP: Hash tables configured (established 2048 bind 2048)
Jan 29 04:25:03 DNS-323 user.info kernel: TCP reno registered
Jan 29 04:25:03 DNS-323 user.info kernel: NET: Registered protocol family 1
Jan 29 04:25:03 DNS-323 user.debug kernel: PCI: CLS 0 bytes, default 32
Jan 29 04:25:03 DNS-323 user.info kernel: Unpacking initramfs...
Jan 29 04:25:03 DNS-323 user.info kernel: Freeing initrd memory: 6240K
Jan 29 04:25:03 DNS-323 user.info kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher
Jan 29 04:25:03 DNS-323 user.info kernel: aufs 2-standalone.tree-35-20100809
Jan 29 04:25:03 DNS-323 user.info kernel: msgmni has been set to 120
Jan 29 04:25:03 DNS-323 user.info kernel: io scheduler noop registered
Jan 29 04:25:03 DNS-323 user.info kernel: io scheduler deadline registered
Jan 29 04:25:03 DNS-323 user.info kernel: io scheduler cfq registered (default)
Jan 29 04:25:03 DNS-323 user.info kernel: Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
Jan 29 04:25:03 DNS-323 user.info kernel: serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A
Jan 29 04:25:03 DNS-323 user.info kernel: console [ttyS0] enabled
Jan 29 04:25:03 DNS-323 user.info kernel: loop: module loaded
Jan 29 04:25:03 DNS-323 user.info kernel: sata_mv sata_mv.0: version 1.28
Jan 29 04:25:03 DNS-323 user.info kernel: sata_mv sata_mv.0: slots 32 ports 2
Jan 29 04:25:03 DNS-323 user.info kernel: scsi0 : sata_mv
Jan 29 04:25:03 DNS-323 user.info kernel: scsi1 : sata_mv
Jan 29 04:25:03 DNS-323 user.info kernel: ata1: SATA max UDMA/133 irq 29
Jan 29 04:25:03 DNS-323 user.info kernel: ata2: SATA max UDMA/133 irq 29
Jan 29 04:25:03 DNS-323 user.notice kernel: physmap platform flash device: 00800000 at f4000000
Jan 29 04:25:03 DNS-323 user.info kernel: physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank
Jan 29 04:25:03 DNS-323 user.info kernel: Amd/Fujitsu Extended Query Table at 0x0040
Jan 29 04:25:03 DNS-323 user.notice kernel: number of CFI chips: 1
Jan 29 04:25:03 DNS-323 user.notice kernel: cmdlinepart partition parsing not available
Jan 29 04:25:03 DNS-323 user.notice kernel: RedBoot partition parsing not available
Jan 29 04:25:03 DNS-323 user.notice kernel: Using physmap partition information
Jan 29 04:25:03 DNS-323 user.notice kernel: Creating 5 MTD partitions on "physmap-flash.0":
Jan 29 04:25:03 DNS-323 user.notice kernel: 0x000000000000-0x000000010000 : "MTD1"
Jan 29 04:25:03 DNS-323 user.notice kernel: 0x000000010000-0x000000020000 : "MTD2"
Jan 29 04:25:03 DNS-323 user.notice kernel: 0x000000020000-0x0000001a0000 : "Linux Kernel"
Jan 29 04:25:03 DNS-323 user.notice kernel: 0x0000001a0000-0x0000007d0000 : "File System"
Jan 29 04:25:03 DNS-323 user.notice kernel: 0x0000007d0000-0x000000800000 : "u-boot"
Jan 29 04:25:03 DNS-323 user.notice kernel: MV-643xx 10/100/1000 ethernet driver version 1.4
Jan 29 04:25:03 DNS-323 user.info kernel: mv643xx_eth smi: probed
Jan 29 04:25:03 DNS-323 user.notice kernel: net eth0: port 0 with MAC address 00:21:91:89:14:c4
Jan 29 04:25:03 DNS-323 user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 29 04:25:03 DNS-323 user.info kernel: orion-ehci orion-ehci.0: Marvell Orion EHCI
Jan 29 04:25:03 DNS-323 user.info kernel: orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
Jan 29 04:25:03 DNS-323 user.info kernel: orion-ehci orion-ehci.0: irq 17, io mem 0xf1050000
Jan 29 04:25:03 DNS-323 user.info kernel: orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
Jan 29 04:25:03 DNS-323 user.info kernel: hub 1-0:1.0: USB hub found
Jan 29 04:25:03 DNS-323 user.info kernel: hub 1-0:1.0: 1 port detected
Jan 29 04:25:03 DNS-323 user.info kernel: Initializing USB Mass Storage driver...
Jan 29 04:25:03 DNS-323 user.info kernel: usbcore: registered new interface driver usb-storage
Jan 29 04:25:03 DNS-323 user.info kernel: USB Mass Storage support registered.
Jan 29 04:25:03 DNS-323 user.info kernel: input: gpio-keys as /class/input/input0
Jan 29 04:25:03 DNS-323 user.info kernel: i2c /dev entries driver
Jan 29 04:25:03 DNS-323 user.info kernel: rtc-m41t80 0-0068: chip found, driver version 0.05
Jan 29 04:25:03 DNS-323 user.info kernel: rtc-m41t80 0-0068: rtc core: registered m41t80 as rtc0
Jan 29 04:25:03 DNS-323 user.info kernel: lm75 0-0048: hwmon1: sensor 'lm75'
Jan 29 04:25:03 DNS-323 user.info kernel: md: linear personality registered for level -1
Jan 29 04:25:03 DNS-323 user.info kernel: md: raid1 personality registered for level 1
Jan 29 04:25:03 DNS-323 user.debug kernel: Registered led device: power:blue
Jan 29 04:25:03 DNS-323 user.debug kernel: Registered led device: right:amber
Jan 29 04:25:03 DNS-323 user.debug kernel: Registered led device: left:amber
Jan 29 04:25:03 DNS-323 user.info kernel: usbcore: registered new interface driver usbhid
Jan 29 04:25:03 DNS-323 user.info kernel: usbhid: USB HID core driver
Jan 29 04:25:03 DNS-323 user.info kernel: TCP cubic registered
Jan 29 04:25:03 DNS-323 user.info kernel: NET: Registered protocol family 17
Jan 29 04:25:03 DNS-323 user.info kernel: rtc-m41t80 0-0068: setting system clock to 2013-01-29 04:24:44 UTC (1359433484)
Jan 29 04:25:03 DNS-323 user.info kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan 29 04:25:03 DNS-323 user.info kernel: ata1.00: ATA-9: WDC WD20EFRX-68AX9N0, 80.00A80, max UDMA/133
Jan 29 04:25:03 DNS-323 user.info kernel: ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Jan 29 04:25:03 DNS-323 user.info kernel: ata1.00: configured for UDMA/133
Jan 29 04:25:03 DNS-323 user.notice kernel: scsi 0:0:0:0: Direct-Access     ATA      WDC WD20EFRX-68A 80.0 PQ: 0 ANSI: 5
Jan 29 04:25:03 DNS-323 user.notice kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan 29 04:25:03 DNS-323 user.notice kernel: sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
Jan 29 04:25:03 DNS-323 user.notice kernel: sd 0:0:0:0: [sda] 4096-byte physical blocks
Jan 29 04:25:03 DNS-323 user.notice kernel: sd 0:0:0:0: [sda] Write Protect is off
Jan 29 04:25:03 DNS-323 user.debug kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jan 29 04:25:03 DNS-323 user.notice kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan 29 04:25:03 DNS-323 user.info kernel:  sda: unknown partition table
Jan 29 04:25:03 DNS-323 user.notice kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Jan 29 04:25:03 DNS-323 user.info kernel: ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan 29 04:25:03 DNS-323 user.info kernel: ata2.00: ATA-9: WDC WD20EFRX-68AX9N0, 80.00A80, max UDMA/133
Jan 29 04:25:03 DNS-323 user.info kernel: ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Jan 29 04:25:03 DNS-323 user.info kernel: ata2.00: configured for UDMA/133
Jan 29 04:25:03 DNS-323 user.notice kernel: scsi 1:0:0:0: Direct-Access     ATA      WDC WD20EFRX-68A 80.0 PQ: 0 ANSI: 5
Jan 29 04:25:03 DNS-323 user.notice kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0
Jan 29 04:25:03 DNS-323 user.notice root: Starting urandom: OK.
Jan 29 04:25:03 DNS-323 user.notice kernel: sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
Jan 29 04:25:03 DNS-323 user.notice kernel: sd 1:0:0:0: [sdb] 4096-byte physical blocks
Jan 29 04:25:03 DNS-323 user.notice kernel: sd 1:0:0:0: [sdb] Write Protect is off
Jan 29 04:25:03 DNS-323 user.debug kernel: sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Jan 29 04:25:03 DNS-323 user.notice kernel: sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan 29 04:25:03 DNS-323 user.info kernel:  sdb: unknown partition table
Jan 29 04:25:03 DNS-323 user.notice kernel: sd 1:0:0:0: [sdb] Attached SCSI disk
Jan 29 04:25:03 DNS-323 user.info kernel: Freeing init memory: 120K
Jan 29 04:25:03 DNS-323 user.warn kernel: aufs test_add:253:mount[53]: uid/gid/perm /tmproot/rootsq 0/0/0777, 0/0/0755
Jan 29 04:25:03 DNS-323 user.info kernel: eth0: link up, 100 Mb/s, full duplex, flow control disabled
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: Starting
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: reading /etc/sysctrl.conf
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: cant open /etc/sysctrl.conf: No such file or directory Using defaults
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: args.lo_fan=2000
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: args.hi_fan=5000
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: args.lo_temp=40
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: args.hi_temp=50
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: args.mail=1
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: args.recovery=1
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: args.fan_off_temp=38
Jan 29 04:25:03 DNS-323 user.notice root: Starting sysctrl: OK.
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: args.max_fan_speed=5500
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: args.crit_temp=54
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: args.warn_temp=52
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: args.crit_temp_command="/sbin/poweroff"
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: args.warn_temp_command="(null)"
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: args.front_button_command1="(null)"
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: args.front_button_command2="(null)"
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: args.back_button_command="(null)"
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: right_dev disk (sda) wakeup
Jan 29 04:25:03 DNS-323 daemon.info sysctrl: left_dev disk (sdb) wakeup
Jan 29 04:25:04 DNS-323 user.info kernel: usbcore: registered new interface driver usblp
Jan 29 04:25:17 DNS-323 user.notice root: dropbear: generating rsa key...  dropbear: generating dsa key...  Starting inetd: OK.
Jan 29 04:25:22 DNS-323 user.notice root: Starting nmbd: OK. Starting smbd: OK.
Jan 29 04:25:22 DNS-323 user.notice root: Starting user: OK.
Jan 29 04:25:22 DNS-323 user.notice root: ****** Boot Log start ******
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:24:46 syslogd started: BusyBox v1.19.3
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:24:47 root: fsck 1.41.14 (22-Dec-2010) fsck.minix: BusyBox v1.19.3 (2012-02-21 15:37:53 WET) /dev/mtdblock0 is clean, check is skipped
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:24:47 root: FIXME: Waiting 3 sec for kernel enumeration to finish...
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:24:50 root: FIXME: stop waiting.
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:24:56 udhcpc[329]: udhcpc (v1.19.3) started
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:24:56 udhcpc[329]: Sending discover...
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:24:59 udhcpc[329]: Sending discover...
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:02 udhcpc[329]: Sending discover...
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:02 udhcpc[329]: Sending select for 192.168.2.57...
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:02 udhcpc[329]: Lease of 192.168.2.57 obtained, lease time 86400
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:02 root: IP from dhcp server
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc: Deconfiguring eth0
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc: udhcpc environment:
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    opt58=0000a8c0
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    router=192.168.2.1
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    subnet=255.255.255.0
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    opt59=00012750
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    METHOD=dhcp
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    MODE=start
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    interface=eth0
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    siaddr=192.168.2.1
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    dns=192.168.2.1
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    ADDRFAM=inet
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    serverid=192.168.2.1
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    broadcast=192.168.2.255
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    IF_CLIENT=udhcpc
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    PATH=/sbin:/usr/sbin:/bin:/usr/bin
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    ip=192.168.2.57
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    lease=86400
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    mask=24
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    IFACE=eth0
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    hostname=DNS-323
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    PWD=/
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc:    opt53=05
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc: Updating /etc/hosts
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc: Updating /etc/httpd.conf
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc: Updating /etc/samba/smb.conf
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc: Updating default route
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc: Updating /etc/resolv.conf
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 udhcpc: adding dns 192.168.2.1
Jan 29 04:25:22 DNS-323 user.notice root: Jan 29 04:25:03 syslogd exiting
Jan 29 04:25:22 DNS-323 user.notice root: ****** Boot Log end ******
Jan 29 04:25:22 DNS-323 daemon.info init: starting pid 497, tty '/dev/null': '/bin/touch /var/log/messages'
Jan 29 04:25:22 DNS-323 daemon.info init: starting pid 498, tty '/dev/ttyS0': '/sbin/getty -n -l /bin/sh -L ttyS0 115200 vt100'
Jan 29 04:25:34 DNS-323 daemon.info sysctrl: temp=33.8	 fan=0
Jan 29 04:31:34 DNS-323 daemon.info sysctrl: temp=33.4	 fan=0
Jan 29 04:41:39 DNS-323 user.info syslog: Password for 'root' changed
Jan 29 04:46:46 DNS-323 authpriv.info dropbear[1093]: Child connection from 192.168.2.2:55137
Jan 29 04:46:50 DNS-323 authpriv.notice dropbear[1093]: Password auth succeeded for 'root' from 192.168.2.2:55137
Jan 29 04:46:50 DNS-323 authpriv.warn dropbear[1094]: wtmp_write: problem writing /var/log/wtmp: No such file or directory
Jan 29 04:52:35 DNS-323 daemon.info sysctrl: temp=33.7	 fan=0
Jan 29 04:58:35 DNS-323 daemon.info sysctrl: temp=34.1	 fan=0
Jan 29 04:59:05 DNS-323 daemon.info sysctrl: temp=34.3	 fan=0

Joao Cardoso

unread,
Jan 29, 2013, 11:08:03 AM1/29/13
to al...@googlegroups.com


On Tuesday, January 29, 2013 3:45:33 PM UTC, Joao Cardoso wrote:
[This post was classified as SPAM and sent to the moderator list, I approved it but now it appears as being deleted!
I will try now a copy/paste
Google Groups #!$*#]

Here is a screenshot from ls and fdisk:
# ls
# ls -l /dev/sd*
brw-rw----    1 root     root        8,   0 Jan 29 04:24 /dev/sda
brw-rw----    1 root     root        8,  16 Jan 29 04:24 /dev/sdb
# fdisk -l

...
 
Disk /dev/sda: 2000.3 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/sda doesn't contain a valid partition table

Disk /dev/sdb: 2000.3 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Disk /dev/sdb doesn't contain a valid partition table
# 

The following pages show the proper disc info:
   Status, Utilities
The following show the "No disks found!" error:
   Wizard, Packages Alt-F and ffp
Raid does not show the error, but the dropdowns do not have any options.
Users shows "No users directory found, create it in:", but the dropdown has no options.
Filesystem Maintenance does not show an error.

Logs files follow:

...
ata1.00: ATA-9: WDC WD20EFRX-68AX9N0, 80.00A80, max UDMA/133
ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32)
scsi 0:0:0:0: Direct-Access     ATA      WDC WD20EFRX-68A 80.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks

Thanks.

The disks are correctly detected and have no partition table (that's OK, are they brand new?).
The disks are 2TB WD with Advanced Format, I have one myself, and others are using them also, so no problem,

I think that I have enough information, but I have to take a closer look.
It is odd that some pages shows the disks while other don't, as all of them use the same method. No clue on what might be wrong.

I can only suggest you to use the Disk Partitioner to create some dummy partitions on each disk, Submit it, and then try the Disk Wizard again.

Worked?

Jeremy Link

unread,
Jan 29, 2013, 11:52:27 AM1/29/13
to al...@googlegroups.com

Ok, I will try that. Is there a recommended partition layout? I plan on setting these as RAID1/mirroring.

-Jeremy

--
You received this message because you are subscribed to the Google Groups "Alt-F" group.
To unsubscribe from this group and stop receiving emails from it, send an email to alt-f+un...@googlegroups.com.
To post to this group, send email to al...@googlegroups.com.
Visit this group at http://groups.google.com/group/alt-f?hl=en.
To view this discussion on the web visit https://groups.google.com/d/msg/alt-f/-/V8sR7SPVEJAJ.
For more options, visit https://groups.google.com/groups/opt_out.
 
 

Joao Cardoso

unread,
Jan 29, 2013, 1:41:34 PM1/29/13
to al...@googlegroups.com, jer...@linkfamily.net
On Tuesday, January 29, 2013 4:52:27 PM UTC, Jeremy Link wrote:

Ok, I will try that.


I would appreciate if you partition the disks just to see if they start appearing in the Disk Wizard, so you can use it.
What partitioning you use for this is not important.
 

Is there a recommended partition layout? I plan on setting these as RAID1/mirroring.


If the Drunk Disk Wizard insists that you have no disk, then:

In the Disk Partitioner
-create a 500MB first partition of type swap
-make the second partition use the rest of the disk as type RAID

-Go to the Status page, do you see that swap is available (0/1000MB or similar) under the top System section?
If yes, you can continue, else you *have* to go to the command line as the 'root' user and activate swap (use 'swapon -p 1 /dev/sda1; swapon -p 1 /dev/sdb1') before continuing and trying to create filesystems.
 
-Go to Disk->RAID, create a RAID1 using the disks second partitions (sda2/sdb2) as the RAID Components
In the Status page you will see that the RAID is resyncing, it might take some 15 hours to complete, but you can continue the procedure.

-Go to Disk->Filesystem and create a filesystem on the newly created RAID device (md0).
This will take a while, see the progress in the Status page.
After it finishes you can start putting data on the disk, even if RAID is still resyncing.

Does the Drunk Wizard now sees the disks? And after a reboot? (it is advisable to wait until RAID finishes resyncing before doing the reboot. And doing a reboot is entirely optional)

Be aware that under RC2 the Disk Wizard, even when not drunk, should not be used to partition a single disk when RAID is setup (read the RC2 announcement followups)

Joao

jlsf

unread,
Jan 31, 2013, 2:04:11 AM1/31/13
to al...@googlegroups.com, jer...@linkfamily.net
Ok, after creating the dummy partitions, I was able to now run the wizard.

My RAID1 array appears to be working correctly, but trying things out now to be sure.

One thing, when accessing the system via IE, the caching is terrible; the values/pages I see are often out of sync. I do not seem to have this problem with Chorme.
Reply all
Reply to author
Forward
0 new messages