TinyCircuits Party!

[Ken Burns]

Hi Everyone,

I’ve finally quit my “real” job at AVID last month to focus on TinyCircuits full-time.  My last day at AVID is this Friday, and we’ll be celebrating with festivities at the TinyCircuits offices here in Akron, and you’re all welcome to stop by to check the place out, hang for a while, and partake in some refreshments.   We’ve invited our entire building here at Canal Place, which consists of artists, three bands, the Rubber City Rollergirls, on top of the Henway and TinyCircuits crowd,  so it should be an interesting mix of people.  We’ll have a keg and some other drinks (alcoholic and non-alcoholic), plus some food, music, if the weather’s good we’ll have the patio open.  You’re certainly also welcome to bring something to share if you like (ie food and or drinks).   Roy of Henway Technologies who shares our space with us (http://henwaytech.com/, ro...@henwaytech.com) is in charge of the party planning, so if you have any questions, contact Roy. 

The party will start around 6PM this Friday (May 17^th), and probably go till after midnight.  Our address is 540 S Main St, Suite 457, Akron, OH  44311, and we're in the Canal Park complex.  The entire complex is very large and it's somewhat difficult to navigate, so use the following directions to help:

If you're coming south down Main street, when you reach the complex you'll see the Spaghetti Warehouse on the right, and Gojo on the left.  Continue down Main St until you reach the last possible entrance before Main St dead ends into Bartges St.  The sign will say "520 - 540 S Main St, Canal Place", turn right at this sign, and drive under a brick overpass.  There is a courtyard like parking lot surrounded by buildings here that you can park.  To the left of where you drive in, there is a sign that says "Entrance to buildings 1, 2 and 9".  This is the entrance you want.  When you arrive, plan on calling my phone at 330-329-5753 or Roy at 440-781-5838 and we’ll send someone down to walk you up to the suite since the door may be locked at that time. 

Hope to see you there!

Ken