Similar project
28 views
Skip to first unread message
יהודה
Mar 8, 2012, 12:06:59 PM3/8/12
to airqualityegg
Hello All,
We (a small group) are also working on a similar project in Technion -
Israel Institute of Technology.
This project targets to monitor 'traffic' related air pollutants (NO2,
CO, VOC and PM) that a pedestrian is exposed to.
I am developing prototypes based on Arduino and Netduino boards with
different gas sensors including metal oxide and electrochemical types.
In past I have used other platform which I no longer intend to include
in my future development.
I will be happy to share our ideas and answer to your questions.
Thanks.
Judah
We (a small group) are also working on a similar project in Technion -
Israel Institute of Technology.
This project targets to monitor 'traffic' related air pollutants (NO2,
CO, VOC and PM) that a pedestrian is exposed to.
I am developing prototypes based on Arduino and Netduino boards with
different gas sensors including metal oxide and electrochemical types.
In past I have used other platform which I no longer intend to include
in my future development.
I will be happy to share our ideas and answer to your questions.
Thanks.
Judah
יהודה
Mar 28, 2012, 12:36:08 PM3/28/12
to airqualityegg
One of my device http://82.102.157.252/
Please be patient with the loading.
NO2 sensor is not yet calibrated.
Suggests are most welcomed.
Please be patient with the loading.
NO2 sensor is not yet calibrated.
Suggests are most welcomed.
יהודה
Mar 28, 2012, 12:37:13 PM3/28/12
to airqualityegg
Dirk Swart
Mar 28, 2012, 1:20:20 PM3/28/12
to airqua...@googlegroups.com, juda...@gmail.com
Thanks for posting this. Can you provide some additional details about your setup, sensors you are using, etc?
Cheers
Dirk
Follow me on Twitter now: dswart
Cheers
Dirk
Follow me on Twitter now: dswart
יהודה
Mar 28, 2012, 1:55:28 PM3/28/12
to airqualityegg
Sure.
I am using Arduino and Netduino platform for integration of metal
oxide and electrochemical sensors.
In this box I only have metal oxide sensors for gases (from e2v and
figaro), temperature sensor from TI, humidity sensor from honeywell.
This box is located at the municipal air quality station, placed next
to their standard monitoring devices. I intend to calibrate sensors
against standard values and then cross check in my lab.
Hope it helps.
I am using Arduino and Netduino platform for integration of metal
oxide and electrochemical sensors.
In this box I only have metal oxide sensors for gases (from e2v and
figaro), temperature sensor from TI, humidity sensor from honeywell.
This box is located at the municipal air quality station, placed next
to their standard monitoring devices. I intend to calibrate sensors
against standard values and then cross check in my lab.
Hope it helps.
Reply all
Reply to author
Forward
0 new messages