rfcomm0 not working.

[Kyler Laird]

I have a Serial 5X.  I can pair and browse it.  The Ubuntu Bluetooth tool creates /dev/rfcomm0 for it.  But I'm unable to use the connection at all.

C-Kermit 9.0.302 OPEN SOURCE:, 20 Aug 2011, for Linux+SSL+KRB5
 Copyright (C) 1985, 2011,
  Trustees of Columbia University in the City of New York.
Type ? or HELP for help.
(/home/kyler/common/projects/Clearpath_Robotics_Husky/) C-Kermit>set line /dev/rfcomm0
(/home/kyler/common/projects/Clearpath_Robotics_Husky/) C-Kermit>set speed 115200
/dev/rfcomm0, 115200 bps
(/home/kyler/common/projects/Clearpath_Robotics_Husky/) C-Kermit>set carrier off
(/home/kyler/common/projects/Clearpath_Robotics_Husky/) C-Kermit>c
Connecting to /dev/rfcomm0, speed 115200
 Escape character: Ctrl-\ (ASCII 28, FS): enabled
Type the escape character followed by C to get back,
or followed by ? to see other options.
----------------------------------------------------

Can't send character: Transport endpoint is not connected



AIRcable> l
Command Line v0.12UART
Name: AIRserial5X 50131
Pin: 1234
Baud: 115200 bps0C2 0104 0034 0020
BT Address:0025BFF00EAF
BT Status:00000
Name Filter:
Mode: Cable - Slave
Paired


I suspect I'm missing something very simple.  Any pointers?

Thank you.

--kyler

[Juergen Kienhoefer]

Ubuntu config:

http://manpages.ubuntu.com/manpages/lucid/man1/rfcomm.1.html

http://www.thinkwiki.org/wiki/How_to_setup_Bluetooth

please check all those resources. 

--
You received this message because you are subscribed to the Google Groups "AIRcable(tm)" group.
To unsubscribe from this group and stop receiving emails from it, send an email to aircable+u...@googlegroups.com.
To post to this group, send email to airc...@googlegroups.com.
Visit this group at http://groups.google.com/group/aircable.
For more options, visit https://groups.google.com/groups/opt_out.