Marketplace (Buy / Sell)

[Brian Agee]

If you have items for sell that you think others may be interested in, or if you know of a great place to buy supplies (shirts, safety pins, trophies, etc.) then please post it inside this thread so that we can keep it all in one thread if possible.

If you post an item for sale, please delete the post once the item is sold.

[rprout]

Are the Bibs with the Dogbones programmed to the Bib #?

[rprout]

I have 2 items for sale:

1. The Plunger switch which allows you to start a race or manually mark finishers just as you would with a Sprint 8, Ultra L10 stopwatch, or Time Machine instead of hitting the Spacebar on the computer. Cost $75.00

2. Programming Antenna: Attach this to the FX7400, FX7500, FX9500 to simplify programming tags. Cost $40.00

Contact rpr...@wildblue.net

[countycoachmo]

Just wondering who has found the cheapest safety pins. I am looking to sell some and wanted to know what fair market value is. I know we usually buy them in boxes of 1440. I have some that are a little smaller (25 mm instead of 28 or 29 mm) and they are in boxes of 1700 and will work for what we need them for. Let me know what you have found and I will see if I can beat the price.

Joshua Moberg
MOGO Timing, Inc
county...@gmail.com
772-812-0050

[Ohio Race Day]

josh,

from an earlier post ...
https://groups.google.com/d/msg/agee-race-timing/ZuJL9g-L_2w/HK9aLB-Ub-8J

.

[rtspt.usa]

the cleaners supply was the best tip for me yet.. half the price of rainbow..

[reece.bell]

I have a flash timing camera system (ft 60) that i will take reasonable offers for. Great for the finish line and can be played back in slo mo. Check http://flashtiming.com/products/ftfat/FTFAT60.html for details.

[Peak Performance Timing]

Is it the USB interface model or the firewire interface model? How much are you hoping to get, and does it include software?

[esondag]

Bump...please make an offer if interested. I have a Motorola FX7400 (4 port) for sale. The firmware has been updated and it has been used for several races. AC adapter is *not* included. I have been powering it using a Power over Ethernet injector connected to a wireless router, which is a much better setup anyway. Paid $900, asking $700, and will include the PoE injector and programmed wireless router.

I'm getting out of the business, and only keeping the software and enough equipment for personal and charity use. Thanks!

[Brian Agee]

I don't use generators and don't know much about what specs are good for generators, however for those that do want one I thought I'd share the information below because it looks like a good deal to me if you're looking for one.

• 2,000-Watt Gasoline Powered Portable Generator $149 Includes FREE Stabil (FAR) w/ Free Shipping to Home or Store TODAY ONLY @ HomeDepot.com
  
• Save $130.00 (47%) through 01/22/2015
  
• Online Exclusive Special Buy of the Day
  
• Link: http://www.homedepot.com/p/Sportsman-2-000-Watt-Gasoline-Powered-Portable-Generator-800425/204855035?cm_mmc=CJ-_-4485850-_-10368321&AID=10368321&PID=4485850&SID=3e1d2801e37242e5ae4becb1b7878fb1&cj=true

[Crystal McCullough]

I want to put in a good word for Robert's (rprout) plunger switch. I purchased one from him a few months ago and have used it in tests, and it's a great way to give my manual timer some flexibility so she doesn't have to just sit in one place hitting the spacebar throughout the race.

It's the same kind of plunger that Brian uses in his timing setup that you may have seen in some of his videos.

Original post here: https://groups.google.com/d/msg/agee-race-timing/xfyhnq0bCs4/bWS2LbC3WnMJ

Crystal

[Peak Performance Timing]

I have one of his plungers too....Works great!

[Brian Agee]

I found a deal I wanted to share for those that may be looking for a very cheap (but sufficient) laptop to use out at read zones on the course. I've never own an Acer laptop, but at $178 (shipped!) it would be tempting if I hadn't already purchased 8 laptops a couple of weeks ago. Here is the link if you're interested: http://www.frys.com/product/8298646?site=sr:SEARCH:MAIN_RSLT_PG

This would also work fine as a manual backup timing laptop too of course.

[CHudsonHRT]

I am looking for a double sided LED clock for the finish line. I have noticed many of you have them. Do any of you have one for sale or have a recommendation on where to purchase one from. 

This is the best deal I have found so far, but I am still shopping around. 

I would appreciate any advice I could get. 

http://www.dlcledco.com/pid14190448/Double+Sided+5%22+High+Character+LED+Race+Timing+Clock+with+Tripod+Hours+Minutes+Seconds+Format+with+Countdown%2fup+Function+Water-proof+Cabinet.htm

[Jon Williams]

I have been working on the same project.  This guy: http://www.aliexpress.com/item/8-Character-High-Red-Color-LED-Countdown-Wall-Clock-For-Horse-Racing-Timing-Sport-Timer-LED/1932645942.html

has offered to sell it for $750 including tripod, 2 remotes and shipping.  I was waiting to buy but I have gone back and forth with him for awhile now to confirm everything.

[Brian Agee]

I bought 32" LED flat screen TV's online for around $150 each, Audio 2000 Ast422y tripods on Amazon for $109.95 each, some 30' HDMI cables for $7.02 each, and a Sewell HDMI splitter for less than $20. So the total cost of our 'double sided clock' is less than $300. Besides the cost savings, what I like best is the fact that I have one less clock to sync up on the finish line. I also like that the TV's are a lot easier to transport in my car and that I don't have to remember to bring a remote. Of course there are some benefits of using an LED clock instead of a TV, but for me the benefits of using TV's outweighs the benefits of the LED clock.  :)

[Brian Agee]

Sorry, I mean the total cost for everything is less than $600, not $300 (was only looking at the cost of a single TV).  I am very pleased with the tripod, I'm sure there is a way to get two TV's on it instead of using one tripod for each TV, however I like that I can easily move each TV around if I need to (for example move the one facing the camera closer so that it's easier to see in the photo).

[Ohio Race Day]

You'll find a similar discussion about LED clocks here  >>>  https://groups.google.com/d/msg/agee-race-timing/9BOmPwJUM28/q2gZr141I0MJ

I bought a double sided LED clock from the same vendor you are dealing with.  He was fair.  I bought mine via Ebay.  He created an auction specifically for the sale to me.  Mine was less than a year old when the "power supply chip" went out.  $64 to fix it.  See my YouTube post for more.

http://youtu.be/8GmTcQqq8Mo

[Rob Goyen]

For a race clock. I negotiated a double sided outdoor 5 inch led clock from china with shipping for $368.00 which you can see here in the photos http://www2.backprint.com/endurophoto/124270/browse

Here is the email address in...@gxleds.net contact person was Lucy and website is http://www.gxleds.net/ 

hope this helps.

[timgrummell]

Brian, a huge disadvantage of a TV here in Ireland is the weather ha. The race clock mounted on the gantry is what really brings me in customers, they like the professional looking finish line, which gives good photos of the competitor with their finish time overhead.

But anyways, agreed about the annoyance about syncing the clock with the laptop (I often do it afterwards, esp if the start and finish are at different locations). The other disadvantage of the double sided clock that many of yous are interested in is the weight of it, if it was made of an aluminium body or even plastic this would significantly reduce the weight. Perhaps if enough of us were interested in purchasing these clocks, we could collectively approach one of the Chinese manufacturers, ask them how much of a premium it would be to do 2 things, 1stly reduce the weight, and 2ndly, programming the clock to receive a digital input from the agee program (could be anything as simple as a USB serial output, and put a USB port on the remote of the clock).

[Anders]

See this thread about serial interface: https://groups.google.com/forum/#!topic/agee-race-timing/69kwHcrc5Ls

[Edward Schrank]

Did the bracket for the tripod mount come with it? 

[Bruce B]

Jon,

How did things work out with the clock?  Did you purchase anything yet?

Thanks

Bruce

[blueridgetiming]

I have 400 laminated "agee style" shoe tags that I am looking to unload. They have been tested, but some only used 1-3 times. If you are interested, let me know and we can work on a fair price.

[steve.stevenoski]

Hello everyone,

I have been timing track, cross country and road races for more than 20 years and have been one of Brian's early adopters.

My job is taking me from the Midwest to the east coast and I will be taking a hiatus from timing for a few years and have a complete turnkey setup available.  I would prefer not to sell piece by piece.  This would be perfect for a starter or for a person looking to expand,

A general list of equipment is provided below.  Please contact me by email if you are interested.

Just timed a race last week and will be timing this weekend an next.  

Have a great day.

Overview of items included.

·   2 X Laptops with power supplies (one for RFID system, one for manual timing)

·   2 X Motorola FX7400 with Power Supply

·   1 x Thinkify TR-290 bluetooth wireless reciever

·   POE injector for FX7400

·   1 X Thinkify TR200

·   1 X UPS Battery Backup

·   5 X RFID Antennas (4 for main system, one for TR200)

·   4 x RFID Impinj Threshold Antenna

·   4 x Finish line mats for Impinj antennas

·   3 X Tripods

·   antenna cables

·   1 X LED 2 sided Clock (and remote) Battery powered with charger and stand.

·   2 X LED TV with table and tripod mount

·   HDMI Cables

·   1 X Canon Camera

·   1 X Canon Camera SD Card

·   1 X Canon Camera 15' USB cable

·   3 X Printer (one laser, one inkjet with scanner and one label printer)

·   USB cables for printer

·   Printer power cables

·   Paper for Printer

·   4 X Rubber Mats

·   2 X Tables

·   2 chairs

·   3 X Tents – 1 10 x 10 and 2 5 x 6

·   Power strips

·   8 X Finish line codes (and two streamers)  (6 might be enough, not sure really)

·   1 X USB Spacebar plunger

·   2200 watt inverter generator

·   2 x 450 watt battery backups and inverters

·   Finish line banner

·   Traffic cones = 12

·   Streamers

·   Ropes

·   Battery powered 400w PA with wireless and wired microphones

·   5’ x 6’ enclosed trailer with shelving for transport of all equipment.

Assorted laminated and rolls of RFID tags

Readers are all self contained in plastic boxes for transport and protection at site.

Readers are all connected by wireless routers.

15 ft Overhead truss and stands also available with clamps for overhead mounting of antenna.

[HopHead]

What are you asking for the setup?

[Craig MacIntyre]

Wow - nice setup - let me know if you decide to part it out.

[Peak Performance Timing]

Me too.

[back40timing]

Did you sell this stuff yet?

[HopHead]

Sell this?

[steve.stevenoski]

Pictures for those that are interested.

[Peak Performance Timing]

Blueridge, did you sell your laminated tags yet?

[blueridgetiming]

Peak, sorry just seeing this now, but yes the tags sold.

[Peak Performance Timing]

Thanks

[Crystal McCullough]

I'm looking for a resource for TNC RP female to TNC RP female coupler / adapters. One of the ones I got when I first ordered from ART got lost and I'm looking to buy a few to keep on hand. I found them on cablestogo.com, but shipping seems a bit too high. Anybody have any leads? Thank you!

[Ohio Race Day]

??  I've bought stuff from one of these vendors

Dave's Hobby Shop on Ebay

Wifi Expert on Ebay

[CHudsonHRT]

I use showmecables.com 

http://www.showmecables.com/product/Reverse-Polarity-TNC-Female-to-Reverse-Polarity-TNC-Female-Adapter.aspx

The adapter is 9.58 with shipping. 

[tiberiu.gindu]

I'm also interested in a Moto FX9500 : ) 
Must be WW (not US-frequencies only)

Tibi

[Run Roanoke]

I am interested Chris

[Peak Performance Timing]

Why are you selling?

[Mark Walton]

Where do you purchase your BIB chips? Thanks

[Ohio Race Day]

@Mark Walton,

MyLaps makes a BibTag product.  Is that what you mean by "BIB chips" ??

Or are you just looking for an RFID inlay to put on the front/back of bib numbers?  If that is the case then you can purchase SmartTrac Dogbones all over the place on the internet.  We get ours from IC-Tag Solutions.

http://www.ictagsolutions.com/

I saw your earlier post about the TR200 cable.  Have you used that unit before?

[Mark Walton]

Thanks for the info. I obtained a cable for the TR200 from Brian to hook up a 5th antenna to my fx7500. Trying it out tomorrow.

[Peak Performance Timing]

Crystal, 

Are your cables LM195, LM240? are your antennas thinkify or motorola?

[Wayne Pignolet]

Chris, I am interested in the cables and the THinkify if they are still available. How much would you want for them or would you rather chat on the phone?

Wayne

[Nicholas Johnson]

Chris Hubbard,  SOLD!  

We would like to buy your FX-9500 8 port reader.. I don't suppose you have any antennas and cords for sale also?  We got a couple of large clients and were going to dive into separate start arch and attempting to capture chip starts.. Im scared. 

[Brian Agee]

If anyone is looking for a good deal on laser printers you should check these out:

http://slickdeals.net/f/8145586-pantum-p2502w-wireless-monochrome-laser-printer-for-24-99-free-shipping-newegg-com

http://slickdeals.net/f/8143522-samsung-m2830dw-xpress-monochrome-laser-printer-49-99-staples-online

I have one of the Pantum printers and they work great, they are very compact so it's easier to lug around than my Dell printer.

[Crystal McCullough]

Hi, all, 

These items are still for sale. I received some inquiries awhile ago, but I didn't realize it because they were to my gmail address that I do not use. Please, if you are interested, do *not* use the 'reply' function of this Google group. Contact me at crystal [at] begoodsports [dot] com, otherwise I probably won't see your email for a month or two, if ever.

Please—I respectfully request that you refrain from sending me super-low offers that you would never consider taking yourself. You and I both know what this stuff is worth. I have included asking prices this time so you know what I expect you to consider.

EDITED 11/3/2015 to show what is sold and what is available. Items in grey are sold.

SOLD: Agee Race Timing FX7500 and TR200 package $1,975 OBO plus shipping

Motorola FX7500 4-Port RFID Reader w/ power supply

Thinkify TR 200 RFID reader (for backup)
5 Circular UHF Panel antennas
2 15’ low loss antenna cable
2 50’ low loss antenna cable
5 Dolica AX620B100 Professional Tripods

Plunger switch

The only thing out of the packages I ordered from Agee Race Timing that I am keeping is the UPS battery backup.

 

Selling separately:

SOLD: 788 used Agee Race Timing shoe/hip tags. No stickers or writing on them. Purchased for $591; asking $440 for the lot plus shipping.

Also:

2 START, 1 FINISH, and 1 checker banner flag. 10' x 2.5' with stands (some spike stands, two surface stands). Paid $700+; asking $500 plus shipping. Note that they have BE GOOD SPORTS in small print on the FINISH and START banners.

One portable finish line truss (On-Stage LS7730 Lighting Stand with Truss), never used except to assemble for photos. Paid $150; asking $120 plus shipping.

Four Guard Dog low-profile ADA-compliant interlocking cable protector mats, 36" by 27" —I use these as the combination finish line/cable protectors. Purchased for $660; asking $500 plus shipping. NOTE: they are HEAVY. I went this route because they look very professional, are just the right height, and you can change the width of your finish line in 3' increments. You can also see them in the first photo.

One dozen Mr. Chain crowd-control stanchions (seen in photo above), red, with 50' of plastic chain. Purchased for $420; asking $315 plus shipping. I will empty them of sand before they are sent to you! :-)

I have a couple of computers that I may also be putting up for sale but I am waiting to hear from a couple of family members that are interested in them.

Thank you!

Crystal

[Peak Performance Timing]

Crystal

Do you still have the shoe tags for sale?

[Randall Ochmann]

Anything left? Looking for antennas and cables.

RJ

[back40timing]

I have 2 Motorola FX7400's I'd like to sell along with 4 Symbol antennas with cords. Make me an offer for the package. 

[HopHead]

Anyone have any readers and antenna setups for sale?

[Mark Walton]

Chris,

Do you still have the FX9500?  If so, is it new or what year did you buy it?

Mark

[Chris Hubbard]

They all sold. Sorry

[Richard Williamson]

WANTED : Thinkify TR200/ TR265

Does anyone have a used TR200/ TR265 hey would sell and ship to the UK please?

Cheers, 

Richard.

[Gangdog]

I am also interested to buy somewhere in Europe!

Anyone can help?

[Ted Finch]

An update on T265.
T265 will not work with EU tags ( I have tried) ( and it is not licensed for EU use).
I know Brian is looking at an alternative to the T265 but this depends on cooperation with vendors and time to do some programming. EU and the Rest of the World will need to be a little patient.
Cheers
Ted
( another 100% read with Hutags at the weekend for 80 runners. http://kitst.co.uk/edtough16.html)

[tiberiu.gindu]

FYI: I see somebody selling a Times-7 mat antenna, approx. $500 (about half the price of a new unit). Does not ship outside U.S....

http://www.ebay.com/itm/Times-7-A5530-70890-2x4ft-RFID-Gound-Mat-Antenna-FCC-/361530359729?

[Gangdog]

Someone may offer antenna cable for FX7500 and AN720-L51NF00WEU(RP-TNC MALE TO N-TYPE MALE)?
At the moment i use CBLRD-1B4002400R but need another one. Maybe someone can offer from Europe.

Another question, can i use this cable for FX7500 - CBLRD-1B4003600R (Use this quality cable for connecting RFID antennas to the Motorola FX9500 Fixed RFID Reader.)?

[Paulo Medina]

In the market for a whole new set up. 

Looking for a 4 or 8 port reader, antennas, cables, TR265, etc... Let me know what you have. 

I am very motivated and if I dont get any responses through here I'll be going through an online retailer but would rather help someone in this board. 

Cheers. 

[David Roy]

Brothers QL-700 Printers are on sale at Staples for 39.99 - offer expires 5-21-16

[Ohio Race Day]

Cleaner's Supply has safety pins on sale again.  Buy two.  Get one free.

http://www.cleanersupply.com/jump/20160528.cfm

[Chris Hubbard]

SOLD

[Chris Hubbard]

SOLD

[Run Roanoke]

Where are you located?

[Chris Hubbard]

If not let me know, I usually keep 5K around.

[countycoachmo]

We have a pair of Motorola FX7400 that we are looking to sell for $400 each.  We have upgraded to FX9500s.  They come with POE power supply and shipping is included.  Email me if you are interested at county...@gmail.com

[Run Roanoke]

Anyone know where I can find a power supply for a fx9500?

[Ohio Race Day]

Run Roanoke,

Jamie Chandler (works for Agee) may be able to get one for you.