SolidWorks Workshop

Secretary AEA

unread,

Feb 7, 2015, 12:37:21 PM2/7/15

to aerospace-batch-...@googlegroups.com, IIT M Aero 2011, IITM Aero 2012, IIT M Aero 2013, ae10-dual-...@googlegroups.com, ae...@googlegroups.com, ae14_ms_...@googlegroups.com, ae14_mt...@googlegroups.com, jacob thekkekara, Gaurav Marothiya, hamz...@gmail.com, Chethana Rao, Nagendra Kumar, Nikunj Rathi, Chaitanya Vijay, ravi teja, Gautham Mg, Gaurav Raj, Rutika Godbole, Aritra Chakraborty, Arshad Quraishi, Sonu Thomas

Dear all,

We all know that SolidWorks is an important tool for designing and simulating 3D models. We are organizing a SolidWorks Workshop on 10th Feb at 6 00 PM in Class Room No. 4 of our Department. The workshop will be conducted by Rakesh, 4th year Dual Degree student of our department. He will be starting from the basics of SolidWorks and will be covering all the important aspects of the software. I urge all the students who are interested in design and simulations to not miss this opportunity.

An Important Note: Please bring your fully charged laptop with SolidWorks installed in it.

Register for the event here: http://goo.gl/forms/jPyE9w7J8E

On spot registrations will also be possible. However, the previously registered participants will be given priority.

Regards,

Manu N M
Secretary,

Aerospace Engineering Association

Indian Institute of Technology, Madras

Secretary AEA

unread,

Feb 10, 2015, 5:01:54 AM2/10/15

to aerospace-batch-...@googlegroups.com, IIT M Aero 2011, IITM Aero 2012, IIT M Aero 2013, ae10-dual-...@googlegroups.com, ae...@googlegroups.com, ae14_ms_...@googlegroups.com, ae14_mt...@googlegroups.com, jacob thekkekara, Gaurav Marothiya, hamz...@gmail.com, Chethana Rao, Nagendra Kumar, Nikunj Rathi, Chaitanya Vijay, ravi teja, Gautham Mg, Gaurav Raj, Rutika Godbole, Aritra Chakraborty, Arshad Quraishi, Sonu Thomas

Dear all,

A remainder for the SolidWorks Workshop. The event will start at sharp 6 00 PM today (2/10/2015) and the venue is CR4 of Aerospace Dept. Please be there before the scheduled time so that you can sit on your preferred locations. Also, be on time so that you don't miss the basics which will be discussed in the beginning.

P.S : Also, it would be helpful for you if you can bring mouse along with your laptop.

Regards,

Manu N M
Secretary,
Aerospace Engineering Association (https://www.facebook.com/AEA.IITM)

Indian Institute of Technology, Madras

#224 Alakananda, Ph. No. +91 9884 727 924

solid_works_IP.jpg

Secretary AEA

unread,

Feb 11, 2015, 5:20:58 AM2/11/15

to aerospace-batch-...@googlegroups.com, IIT M Aero 2011, IITM Aero 2012, IIT M Aero 2013, ae10-dual-...@googlegroups.com, ae...@googlegroups.com, ae14_ms_...@googlegroups.com, ae14_mt...@googlegroups.com, jacob thekkekara, Gaurav Marothiya, hamz...@gmail.com, Chethana Rao, Nagendra Kumar, Nikunj Rathi, Chaitanya Vijay, ravi teja, Gautham Mg, Gaurav Raj, Rutika Godbole, Aritra Chakraborty, Arshad Quraishi, Sonu Thomas

Dear all,

Thank you guys for the great participation. Special thanks to Rakesh, who did a wonderful job in conducting the workshop. I'm sure that all of you who attended the workshop would've gotten a good first hand experience with SolidWorks, and will be able to proceed forward on your own.

Regards,

Manu

Regards,

Manu N M
Secretary,
Aerospace Engineering Association (https://www.facebook.com/AEA.IITM)

Indian Institute of Technology, Madras

#224 Alakananda, Ph. No. +91 9884 727 924

Reply all

Reply to author

Forward