Flexisign Pro 7.5 V2 Crack
Amabella Tevebaugh
Ive had a snoop around and cant seem to find what im looking for, ive just purchased a MH721, and i use Flexisign 10, it has the cutter in the production manager but it doesn't seem to cut, its connected using the USB and i think i may need drivers to make this work, can anyone assist?
I believe the generic FTDI drivers you can find will work. The USB on the MH is iffy at best and you are better off using the serial port. If your computer does not have a serial port, the Tripp-lite Keystone adapter is known to work.
no it doesn't require it, it cuts fine with my graphtec machine, i only purchased this one to allow me to do larger formats, ive just tried the signmaster software that came with it and it worked fine, i just dont know that software and from i se does a lot less than flexisign
Only legal Flexisignpro 10 has a USB dongle. That is the USER ID and the password for the software. I showed you the USB dongle from my Flexidesigner 10. Which is Flexisignpro10 without the RIP. Legal Flexisignpro 10 comes on a disc and with paperwork that is the user ID and password like below. Any thing else would be pirated, counterfeit.
This is what happens with LEGAL Flexisignpro 10 when you don't have the USB dongle in your computer. That USB dongle is the password for the software. Flexisignpro 8.1 and 10 are 2 of the most pirated Flexisignpro programs.
well i dont know what to say, my Flexisign works fine, and like i said cuts great with my Graphtec machine, i purchased as a bundle a while back so i dont know why it doesn't have a key or if its been pirated, and that doesn't help me answer my question to why it wont cut on this MH721
ive sent an email to SAI asking for this advice as to why it doesn't cut, i tried a previous design just incise it was something i had dont and the head moved a little more then "write error" came up again
yeah i think I'm starting to see the issue, ive just googled KI-870A and it comes up with a VEVOR machine that looks exactly like this one, and looking at images of the MH721 on US Cutter website there's a subtle difference like sticker location and the LCD panel is blue where mines white... i may have been had over as i know VEVOR machines dont work with Flexisign (so ive read)
Yes, I see it is a Vevor brand.(after searching model number) People come here and claim it is a night mare machine. Just put Vevor in the upper right search box. (search everything) Plenty comes up.