Sxstrace.exe Download Windows 7 32 Bit

[Beverly Zielonko]

TheThe application has failed to start because its side-by-side configuration is incorrect" error was occurring when starting a windows service. In our instance this was caused by the services application.config xml file not being valid - someone had edited it manually and pasted in an extra closing tag. Amending this resolved the "not related in any way whatsoever" error message.

Yes, that can only be found on a machine that has Visual Studio installed. The DebugCRT is not distributable. And it doesn't make sense to write C or C++ code and deploy the debug build for it, it is a lot slower.

Pull it up in a text editor and chances are something won't be closed properly or there will be a few garbage characters at the end. You can figure out why that happened later. But for now, just fix it and you'll be able to launch.

I had this issue and it was a simple problem with the version value in assemblyIdentity element of the app.manifest file. Apparently version must have all four numbers (unless assemblyIdentity is ignored which is the case if the manifest is embedded).

In my case, I was working with a console application which is build in c# and I was using VS 2017. I tried to publish the code by right clicking on the project and select the publish option and then configure the required settings. it didn't published the exe on configured path but whenever I tried to compile or tried to build the application, I was getting this kind of error. I was googling that error message and I came across this question. This answer may seems irrelevant to the question but still I am posting my answer for the folks like me who got here because of facing problem like mine. So I found the salutation for my problem as below steps :

When I tries to run Glary Utilities 5.46, the following error message appears.'The application has failed to start because the side by side configuration is incorrect please see the application event log or use the command line sxstrace.exe tool for more detail'

I had posted a question in Microsoft Community and did what the support engineer said, including repairing corrupted files with RestoreHealth and re-installation in compatible mode, but the side by side configuration error still appears. What else can I do?

But when I ran the installer, I realized that Microsoft Visual C++ 2013 Redistributable Package was already installed on my computer and it was asking for repair instead. To be on safe side I just ran the repair wizard once.

Hope you are doing well and sorry for the trouble. As described, you are unable to open Acrobat DC and getting the error 'The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.'

What is the version of the Adobe Acrobat DCand the OS you are using? To check the version go to Help > About Acrobat and make sure you have the latest version installed. Go to Help > Check for Updates. Reboot the computer once and restart the application and check if that helps.

i have hp 64bit lp with win10 all vc++ installed perfectly and i had installed cad and 3ds both working fine but revit it is not opening says side by side config incorrect i tried all solutions available on internet but nothing work like reinstalling c++ and windows update but nothing work so please give me correct solution

Description of the issue: When opening a Brave profile pinned to my taskbar, it throws error code: The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.

How can this issue be reproduced?

Back in early February, several product engineers running Windows 7 on Dell laptops at the large company I work at downloaded and installed Allegro Free Physical Viewer 16.6. We needed to upgrade to 16.6 to be able to open .brd created by our PCB layout group, who recently updated their layout tool. We use Allegro Free Physical Viewer to review PCB layouts prior to ordering them so it is important to be able to open them conveniently.

Since February 12, 2013, no one has been able to run Allegro Free Physical Viewer 16.6. There is an error screen at start up that says "The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail." Because of this error, we have been unable to review files on our own PC. This is going on 5 weeks now.

The Event Viewer has some more precise details of exactly what is missing and there are some notes on running the sxstrace, it looks like you need to kick this off with "Run as Administrator" if UAC is enabled to get sufficiently elevated rights to get the trace. Once identified, you should then be able to download the required run-time from the links provided, or search the Microsoft site for a download containing the missing components.

I had the exact error in Windows 7 x64 Pro. I had to install from zip and run it in a different folder than the automatic setup method. Then I proceeded to uninstall the automatic setup installation. Avoid automatic setup install, stick with the zip.

No, please don't stick to the zip!! With 1.0.6 most installation issues should be fixed, but if someone still has a very old version the unstaller of this version might forget to remove the entry in the start-menu. You can just delete this manually and you are good. (Start->All Programs->Auto Start)

This issue came up again in Win 7 x64, so my previous post isn't the answer. No running processes, no startup item for Greenshot in either the startup folder or msconfig, and the Greenshot.exe.config is gone as my previous post noted. I couldn't find Greenshot in the 'Add and Remove Programs' dialogue, which was strange. Ran unins000 manually from the install folder. Going to try the latest version.

I am simply amazed.

The program ran for months until a recent Windows update (Win 7, 64 bit).

Since then I had the same issue: no autostartup, no registry entry, just rebooted computer but I'd still get the error message.

I have the same error. To track down the cause I disabled all startup programs except Greenshot using MSCONFIG. I enabled one at a time restarting windows each time. In my case the Intel USB 3.0 monitor was conflicting with Greenshot. Reading several discussions about the Intel USB 3.0 monitor this is just one in a long list of problems it causes.

I have been fighting this for a few weeks. I found the "solution" above when I changed the config file to reference XML 2 vs. XML1. Seemed to work for a while. I set Greenshot up to not load on startup to help prevent possible "already running". Now I get a new message saying thay my configuration has a side-by-side error and I need to start using sxstrace? How do I use this and what do I look for? In the meantime, I will start again......

I just did the following:

Uninstalling Greenshot using their uninstall program. Success

Installing again..1.2.6.7, added DropBox to defaults, no languages, start with Windows, start now

Error message: An instance is already running.

Changed config file doing 1.0 to 2.0. Saved the config file.

Started from icon, starts up OK.

Preferences: Changed from png to jpg

No other changes, did no logoff or reboot.

Is now installed, no errors ... will document as errors come up in next few days.....

OK, about one hour later. I needed to Log Off/On. When I logged back on, the icon was not in the systray (setting is to show icon and notifications), and Greenshot is not showing up in Task Manager. The config file still has 2.0 for XML, Greenshot is supposed to be running because it is set in the RUN section of the registry. So, if it is running as intended, there is no sign of that in the systray or in the Task Manager. So, clicked on icon to run Greenshot and got the following error message (Cannot use Greenshot to capture this message box, aargh!):

2015-08-06 14:34:40,677 [Greenshot] WARN - [GreenshotPlugin.Core.Language] Fixing missing ietf in language-file C:\Program Files\Greenshot\Languages\Plugins\GreenshotExternalCommandPlugin\language_externalcommandplugin-zh-CN.xml

2015-08-06 14:34:41,171 [Greenshot] WARN - [GreenshotPlugin.Core.Language] Unknown language en, trying best match!

2015-08-06 14:35:57,042 [Greenshot] WARN - [GreenshotPlugin.Core.Language] Fixing missing ietf in language-file C:\Program Files\Greenshot\Languages\Plugins\GreenshotExternalCommandPlugin\language_externalcommandplugin-zh-CN.xml

2015-08-06 14:35:57,061 [Greenshot] WARN - [GreenshotPlugin.Core.Language] Unknown language en, trying best match!

2015-08-06 14:40:56,983 [Greenshot] WARN - [GreenshotPlugin.Core.NetworkHelper] Problem requesting HTTP - HEAD on uri -feed/

2015-08-06 14:40:56,983 [Greenshot] WARN - [GreenshotPlugin.Core.NetworkHelper] Configuration system failed to initialize

2015-08-06 14:45:56,896 [Greenshot] WARN - [GreenshotPlugin.Core.NetworkHelper] Problem requesting HTTP - HEAD on uri -feed/

2015-08-06 14:45:56,896 [Greenshot] WARN - [GreenshotPlugin.Core.NetworkHelper] Configuration system failed to initialize

2015-08-06 14:50:56,902 [Greenshot] WARN - [GreenshotPlugin.Core.NetworkHelper] Problem requesting HTTP - HEAD on uri -feed/

2015-08-06 14:50:56,902 [Greenshot] WARN - [GreenshotPlugin.Core.NetworkHelper] Configuration system failed to initialize

2015-08-06 14:55:56,916 [Greenshot] WARN - [GreenshotPlugin.Core.NetworkHelper] Problem requesting HTTP - HEAD on uri -feed/

2015-08-06 14:55:56,916 [Greenshot] WARN - [GreenshotPlugin.Core.NetworkHelper] Configuration system failed to initialize

2015-08-06 15:00:56,913 [Greenshot] WARN - [GreenshotPlugin.Core.NetworkHelper] Problem requesting HTTP - HEAD on uri -feed/

2015-08-06 15:00:56,913 [Greenshot] WARN - [GreenshotPlugin.Core.NetworkHelper] Configuration system failed to initialize

2015-08-06 15:05:56,917 [Greenshot] WARN - [GreenshotPlugin.Core.NetworkHelper] Problem requesting HTTP - HEAD on uri -feed/

2015-08-06 15:05:56,917 [Greenshot] WARN - [GreenshotPlugin.Core.NetworkHelper] Configuration system failed to initialize

2015-08-06 15:10:56,927 [Greenshot] WARN - [GreenshotPlugin.Core.NetworkHelper] Problem requesting HTTP - HEAD on uri -feed/

2015-08-06 15:10:56,927 [Greenshot] WARN - [GreenshotPlugin.Core.NetworkHelper] Configuration system failed to initialize

2015-08-06 15:15:56,929 [Greenshot] WARN - [GreenshotPlugin.Core.NetworkHelper] Problem requesting HTTP - HEAD on uri -feed/

2015-08-06 15:15:56,929 [Greenshot] WARN - [GreenshotPlugin.Core.NetworkHelper] Configuration system failed to initialize

2015-08-06 15:20:56,935 [Greenshot] WARN - [GreenshotPlugin.Core.NetworkHelper] Problem requesting HTTP - HEAD on uri -feed/

2015-08-06 15:20:56,935 [Greenshot] WARN - [GreenshotPlugin.Core.NetworkHelper] Configuration system failed to initialize

3a8082e126