Digidata compatibility

[Alex Naka]

Has anyone worked out how to interface Acq4 with non-National Instruments daq devices? I just inherited a patch clamp rig that has a Digidata 1440a digitizer, acquisition is currently controlled by clampex but I'd really like to use something open source if possible...

[Luke Campagnola]

I don't know of anyone using acq4+digidata, but NI cards good enough for patch clamp experiments are relatively inexpensive--about $1000, or a little more if you need digital sampling.

If that's too expensive, then maybe we should be thinking about a custom solution like arduino + ADC/DAC chips :D

---

From: ac...@googlegroups.com <ac...@googlegroups.com> on behalf of Alex Naka <alex...@gmail.com>
Sent: Tuesday, October 30, 2018 11:09:49 AM
To: ACQ4
Subject: [acq4] Digidata compatibility

 

Has anyone worked out how to interface Acq4 with non-National Instruments daq devices? I just inherited a patch clamp rig that has a Digidata 1440a digitizer, acquisition is currently controlled by clampex but I'd really like to use something open source if possible...

--
You received this message because you are subscribed to the Google Groups "ACQ4" group.
To unsubscribe from this group and stop receiving emails from it, send an email to acq4+uns...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/acq4/1b92590e-9d8f-46c6-b212-efb2d63bf26f%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.