ACQ4

First, a note on reading that error. That's a sensapex manipulator that is being asked to go to a

Hi everyone, I have a question about the acquisition speed of the camera with ACQ4. We are currently

I met with Louison just now. Our conclusions: Sensapex devices were present when we restarted ACQ4,

Good idea. Fixed in the `tools/requirements/qt5-generic.yml` file, which is the one referenced in the

I updated pyqtgraph and it works. Thanks a lot ! Bests, Louison Le mercredi 4 décembre 2024 à 02:25:

Yes, my preference would probably have been to directly access the devices via their DLLs, but this

Hello Nima, In the screenshot you posted, the exposure time of your camera is 3 ms. Can you get

Greetings, It looks to me like you are using an older version of Python. Most of the folks writing

Hi Andy, I have not used a Soft Panel or heard of anyone else attempting this, but I'd love to

Hi Luke, I just ported the current multipatch device+driver code, backported it into our current

One detail I just thought of: above I said that TeensyDeviceTask.start() should note the current time

Hi Marton! I believe blind autopatch is already possible. If all goes well, I will be testing this in

Hey Michael! Do you have any thoughts about what that UI _should_ look like? For example, we could

Hi Luke, Thank you! This worked fine! Best wishes, Edite On Wednesday, June 24, 2020 at 7:55:21 PM

Memory leaks can be tricky to resolve in Python. I don't have a good idea what could be leaking (

I have messed around in the MetaArray.py and could manage to work it out. It is messy but I can read

Thanks, I can do that for myself! This patch module does everything I need right now. I am looking

Thanks Luke, That's just what Oli and I needed to get us going. Best Andy On Thursday, 6 June

Hi Luke, I do have some experience with python but much less with adding GUI elements. If you can

Ok I worked something out using nidaqmx with hardware timing. Module with function attached...

I'm not sure about that .. I would start by (1) verifying that your monitor is indeed creating

This code is already present in the existing MultiClamp device code, so I think we're ok there..

Hi Luke, That appears to have done the trick. Thanks for your help! Best wishes, Kyle On Monday, 12

I don't know of anyone using acq4+digidata, but NI cards good enough for patch clamp experiments

Thanks Luke, this helps. Likely what I will do is proceed to install both scanimage and acq4. First,

Dear Antonin, sorry for my late response. My develop branch is very specific for my setup. And it

Ah, of course the python in use is probably the conda process doing the install. Seems like every 6

Hi Samuel! I think we have seen this error before: https://groups.google.com/d/msg/acq4/swlSoUSsbvE/

On Tue, Nov 7, 2017 at 8:04 AM, Michael Graupner <graupner...@gmail.com> wrote: Dear Luke,

Howdy patchers, Lots of news to report this evening! * I will be presenting ACQ4 in a dynamic poster