Help with PC2

[Marwa]

Dear All
I hope you're all fine and going well with contest preparation.
I have a question about PC2
We've put it on 2 machines but the client keeps telling that it's
"unable to contact server"
looking into log file, I found that it tries to contact a server on
localhost, despite in pc2.ini file, server=the other machine ip:50002,
which is the default port number.
If that helps, both machines are running windows XP, both on the same
workgroup, and both have firewall off. And, we've tried both private
and public IPs for both.
So, any suggestion is appreciated.
Thansk in advance.

Marwa Yusuf

[Ahmed Aly]

Which version of PC^2 do you use? Ahmed Mohamed Aly Reda ahmed_aly FCI-CU CS Dep. --- On Sun, 10/11/09, Marwa <marwa...@gmail.com> wrote:

[Yasser Yahia]

Make sure U've changed the ip on the right ini file it should be located
next to the other batch files not outside this folder so if U have 2 ini
files one inside the folder containing the batch files and the other outside
it update the one which is inside only.

Regards,
Yasser Yahia

--------------------------------------------------
From: "Marwa" <marwa...@gmail.com>
Sent: Sunday, October 11, 2009 6:22 AM
To: "ACM Egypt" <acm-...@googlegroups.com>
Cc: <abdulla...@yahoo.com>; "Ahmed Abdullah" <mindhu...@yahoo.com>;
"Rania Ramadan" <eng_rani...@yahoo.com>
Subject: Help with PC2

[Marwa Yusuf]

version 1.9

--
Marwa Yusuf
Assintstant Lecturer - Computer Dept.
Shoubra Faculty of Engineering - Benha University

[Marwa Yusuf]

Thanks a million. I really appreciate your help. It worked. The problem was the location of conf. file, as it was not with batch files. I just assumed that its default location is the right one.
Thanks again.

On Sun, Oct 11, 2009 at 12:56 PM, Yasser Yahia <yasser...@gmail.com> wrote: