3200CBM CSD for resale
www.chinamarinetrade.com
3200M3/h CSD FOR RESALE
一、 GENERALS
This dredger is unpropellered cutter suction dredger with whole
underwater mud cutter suction operating system.
The dredger be used for coastal waters reclamation of the use of
dredgered, be used as great coastal waters towage.
Accoriding to the latest dredger work requirements ,the ship has a
pile positioning automatic trolley system, dredging and suction
system, sliding devices, anchor rodsystems, gantry hanging
shelves,hanging cabin,deck crans ,the main vice pole pile down
automatically,lifting systems.
The ship structure, performance, fire rescue,navigateon signals
according CHINA MSA domestic voyage ship the statutory test
specification 2004 and CCS steel ship classification rules 2006 ,great
coastal area dredger requirement of design ,equipped with.
Principals of the dredger
LOA L 81.56m
LBP L 62.7m
WIDTH B 16.5m
BEAM B 16.0m
Depth D 4.00m
Draft d 2.60m
Displacement △2020t
Depth of dredger 28.0m
Water displacement pump chamber 10000m3/h
Submersible pump water displacement 10000m3/h
Mud pump total head 111m
Mud pump main enginee 12V280ZC/3150KW×1000rpm
Auxiluary enginee 12V240ZC/D/1850KW×1000r/min
Auxiluary enginee 12V240ZC/D /1850KW×1000r/min
Cutter knife power 1000KW
Anchor rod length 28m
Trolley travel 6.0m
Nain pile Φ1200mm
Vice-pile Φ1200mm
Suction tube Φ900mm
Mud tubes Φ840mm
Head 4-6.5km
Endurance ~300h
Beds 25p
Navigation area coastal dredger / great coastal towage
三、specification
1．Main engine & mud pump
Main engine：12V280ZC
Power：2650KW/1000r/min
Mud pump：131-28-65HIGH WEAR-RESISTANT MATERIALS
Capacity： 10000m3/h，head: 76mH2O,shaft power 2618KW,
RPM 410r/min,
Main engine flywheel driven pump with a high elastic and gear box
2．Auxuliary engine and pump
2.1 NO.1
A/E Ⅰ：12V240ZC/D/1850KW/1000r/min
PWOER：1850KW/1000r/min
UNDER WATER PUMP ：131-28-65wear-resistant material
Capacity：10000m3/h，head 35mH2O,shaft power1395KW，
Rpm 320r/min， A/E driven generator
Generator 1600KW
Underwater mud pump driven ，power 1400KW，
Axis control system
2.2A/E No.2
A/E No.2：12V240ZC/D/1850KW/1000r/min
Power：1850KW/1000r/min
No.2 through the auxiliary hydraulic pump bull gear drive (for driver
reamer,slidingwinches,bridges winch,anchor winch , located piling
lift, trolleys,ect) and the shaft generator 300kw.
3．Knife、positioning pile system and winch system
3.1knife
Dim：2770mm、4.00L/Timport of hydraulic motor drive（6units Kawasaki
motor）
Input power：1140KW
Output power：1000KW
Rpm：0~36rpm
Note：model of hydraulic motor HMHDB400,
displacement 6800ml/r，max power 190kw，pressure 25mpa
3.2positioning pile
Main pile、vice-pile：1200mm，
main pile、vice pile length：40m，
pile locates on main station car, automatic down pile, pile up
3.3trolley distance 6m，with observation screem
3.4hydraulic winch
Power：500KN，1set，speed of towage：0~20m/min，with a closed upper and
lower pulley.
3.5sliding hydraulic winch
Towage：450KN，2sets，towage speed：0~20m/min，with 2 sets of closed
horizontal pulleys.
3.6cantilever crane 2 sets
SWL：80KN×9m、SWL：80KN×9m/30KN×12.5m
4．Generators
4.1shaft generators 300KW
4.2 emergency generators CCFJ90J-WF
Power：90KW
Votage：3×400/230V
Frequency：50Hz
4.3standby generators 300KW 1set（zibo diesel engine factory）
5．Hydraulic device
5.1hydraulic pump station
5.1.1high level alarm in oil tanks，viewed at control room，tank is
equipped with drain holes for the mouth and into the oil tank cleaning
and inspection.
5.1.2the fuel tank outlet location make new oil flows through the oil
filter back into the tank
5.1.3high temperature alarm and low temperature alarm of oil tank
5.1.4hydraulic pump
william +86 186 1662 2327