looming

[Scott Young]

HI Fellas, I've poked around some of the console files 

the frame i've been dealt ,some body pulled the buckets and chopped the wiring harnesses..

 was 24x6x2.. 470-472..originally 

the guy I bought it from had the frame loaded with 460's unknown to me was the hatchetry inside.. 

I guess where I'm at is re-looming for M460. with 468J above,..some 450B summing cards..

I have seen very few desks with 460s..so I need some direction with what would go into it's master section ect.. 

Also is the rea general standard TB layout?

does anybody have older console docs of desks with 460's

Looks like I have a serious piece of work ahead..The Idea of CAT5 twisted pair looks like a good direction.. any tips on where and how best to deploy that would be very welcome..

cheers 

Scott

[Anthony Kuzub]

Well, that's a can of worms with seeing things.  

Take pictures or make a YouTube video.  

We are not here to judge. So don't be shy. 

I'd start with the manual for each of the module and work backwards.

As for the main monitor section, what modules are there? 

Are there tie back trees?

Have you got one of these?

https://www.homedepot.ca/product/klein-tools-pro-tone-and-probe-electrical-wire-tracer-kit/1001632690?eid=PS_GOOGLE_D00%20-%20E-Comm_GGL_Shopping_PLA_EN_All%20Products_All%20Products__PRODUCT_GROUP_pla-300587868876&gclid=Cj0KCQjwqNqkBhDlARIsAFaxvwzUDaOWHMw4Zu7Ctw3bBmwYucozK8bByVul8BmgWL7v0J6E326faOIaAgNGEALw_wcB&gclsrc=aw.ds

--
The WBSps.ca is run by Canadians who appreciate Well Built Stuff
 
Manuals: https://drive.google.com/drive/u/2/folders/0B0yR0b5T78SKczBIcDgzZkstUjQ
 
Photos:
https://drive.google.com/drive/u/2/folders/0B0yR0b5T78SKd2JnQzlrckY2bWM
---
You received this message because you are subscribed to the Google Groups "WBSps - Ward-Beck Systems Preservation Society" group.
To unsubscribe from this group and stop receiving emails from it, send an email to WBSps+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/WBSps/fb6a30b6-5d9f-46af-b2a8-b3747dd112f9n%40googlegroups.com.

[Scott Young]

I'll get on some detailed pics,, I've discovered this was the desk before buggery..you may know it...  some bucket bottoms with card edge were included in a box but are not the ones out of this desk

.

and now

[Anthony Kuzub]

Well sir... You are out of luck

You are effectively building a console from scratch. 

That is so sad that someone did that to that console

It was fully working last time I saw it, what a shame.  

Anthony 

To view this discussion on the web visit https://groups.google.com/d/msgid/WBSps/56f50889-4290-4f57-9d45-d3274bdf9e94n%40googlegroups.com.

[Scott Young]

here is a pic of looking.. not from this desk.. looks liike from an older desk with 460's, these might get me a little further ahead..

the TBs are still in it.. is there are standard TB sceme? Any chance you have any 460 based console docs?

cheers

Scott

 I

[Anthony Kuzub]

https://like.audio/20230625/custom-cfto-ward-beck-console-rebuild-2016/

Back in 2016 Tristan and I rebuilt that one 

Anthony 

To view this discussion on the web visit https://groups.google.com/d/msgid/WBSps/77b8774d-e903-4f31-b89c-713d9e44da83n%40googlegroups.com.

[Scott AlchemySound]

Hi Anthony.. I'm soldering ADC terminal blocks ..it's slow and steady. particularly mic inputs. is there a tool for winding, or any tips for optimal flow?

Any tips would be much appreciated...

cheers

Scott

 

You received this message because you are subscribed to a topic in the Google Groups "WBSps - Ward-Beck Systems Preservation Society" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/WBSps/O8HOMUwL9QI/unsubscribe.
To unsubscribe from this group and all its topics, send an email to WBSps+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/WBSps/CAKiKWgwsfZ9HZJZGE06nDvezMo2MUGv-%2BmBz4hB4M0hROTnODA%40mail.gmail.com.