Bluetooth antenna relocation

[chris]

I tried to do a post about my bluetooth antenna relocation for my radio, but it said it was too long. 

Here's the link to my write up. I hope the link works. Holler if you have questions.

https://docs.google.com/document/d/1puvu8EKxHh5pZPA-DClqx4ZRLmh-Jp63xQVfQQi19dc/edit?usp=sharing

Chris,

WA5P

[Christopher Kovacs]

Thank you Chris!

Very helpful write up.

73

Chris, w0anm

--
You can reply in normal email or send via normal email by using
vero...@googlegroups.com
---
You received this message because you are subscribed to the Google Groups "Vero VR N7500 Dual Radio Band" group.
To unsubscribe from this group and stop receiving emails from it, send an email to Veron7500+...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/Veron7500/e5c5dcf5-6286-4ba6-b6cf-2eca370b5f89n%40googlegroups.com.

[Jason Jaurigue]

Chris thanks for the write up. I'm going have to play around with this. 

--

You can reply in normal email or send via normal email by using
vero...@googlegroups.com
---
You received this message because you are subscribed to the Google Groups "Vero VR N7500 Dual Radio Band" group.
To unsubscribe from this group and stop receiving emails from it, send an email to Veron7500+...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/Veron7500/e5c5dcf5-6286-4ba6-b6cf-2eca370b5f89n%40googlegroups.com.

--

------

Jason Jaurigue

[Erik Gaudin]

Anyone find a Bluetooth range extender we could use with the Vero? 

I use my 7500 as a base station, and want to be able to use it away from it, in my yard as an example. 

Not sure how much I will gain with antenna relocation, but been able to be lot of ft away, using my bluetooth microphone and PTT will be Awsome 

[Erik Gaudin]

Did you cut the bluetooth antenna on the pcb after soldering the cable? 

[Erik Gaudin]

Seem not working for me. I install the mini-coah at the same location as the guide, and to be sure it's working, i but my radio in metal container, leaving out only antenna's (bluetooth and RF), it didn't gain anything. If fact, signal seem to still goes out from the onboard antenna only

So reason why i asked my question, did you cut the PCB bluetooth antenna after installing the external SMA kit ? 

I will of course, re-check if i did it right, but want to see what as been done. The gDoc don't tell anything about cuting the onboard antenna. Only where to wired the SMA kit.

[C.L. Hollahan]

Yes I did. 

On Aug 25, 2024, at 10:46, Erik Gaudin <erik....@banshee.org> wrote:

Did you cut the bluetooth antenna on the pcb after soldering the cable? 

--

You can reply in normal email or send via normal email by using
vero...@googlegroups.com
---
You received this message because you are subscribed to the Google Groups "Vero VR N7500 Dual Radio Band" group.
To unsubscribe from this group and stop receiving emails from it, send an email to Veron7500+...@googlegroups.com.

To view this discussion on the web, visit https://groups.google.com/d/msgid/Veron7500/3fbb6cfa-94ca-4e1e-a233-809f4fc9273fn%40googlegroups.com.