[Fwd: [PLUG-officer] Connecting to PAL]

[John-Michael Mulesa]

[Muhammad Adnan Hyder]

what OS you have and what settings you following? Easiest thing to do is to take it to the Stewart center basement at ITAP customer support center and they will set it up for you. But, if you wanna do it your way, then make sure that the drivers are installed and you have removed the PAL-Instructions from your wireless connections list and then try to setup PAL2.0. I hope this will help you....

regards

On Fri, Nov 20, 2009 at 11:57 AM, John-Michael Mulesa <jmu...@purdue.edu> wrote:

--

You received this message because you are subscribed to the Google Groups "Purdue Linux Users Group" group.
To post to this group, send email to purd...@googlegroups.com.
To unsubscribe from this group, send email to purduelug+...@googlegroups.com.
For more options, visit this group at http://groups.google.com/group/purduelug?hl=.



I followed instructions for connecting to PAL 2.0 but I could not
connect. Can any one help me.

regards,
Shiv

--
To post to this group, send email to PurdueLU...@googlegroups.com
To unsubscribe from this group, send email to PurdueLUG-offi...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/PurdueLUG-officer?hl=en

--
Muhammad Adnan
mohamma...@gmail.com
Cell No. : 765-413-4021

[AL]

Itap, wouldn't likely be able to solve problems regarding Linux. If
you are using Linux, which I am guessing since you're emailing it to
the President of PLUG, PLUG hosts Office Hours on Thursday at Lawson
Basement from 6 - 7. Please go there and they will help you with this
problems.

On Nov 20, 12:01 pm, Muhammad Adnan Hyder <mohammad.hy...@gmail.com>
wrote:

> what OS you have and what settings you following? Easiest thing to do is to
> take it to the Stewart center basement at ITAP customer support center and
> they will set it up for you. But, if you wanna do it your way, then make
> sure that the drivers are installed and you have removed the
> PAL-Instructions from your wireless connections list and then try to setup
> PAL2.0. I hope this will help you....
> regards
>

> On Fri, Nov 20, 2009 at 11:57 AM, John-Michael Mulesa <jmul...@purdue.edu>wrote:
>
>
>
>
>
> > --
>
> > You received this message because you are subscribed to the Google Groups
> > "Purdue Linux Users Group" group.
> > To post to this group, send email to purd...@googlegroups.com.
> > To unsubscribe from this group, send email to

> > purduelug+...@googlegroups.com<purduelug%2Bunsu...@googlegroups.com>
> > .

> > For more options, visit this group at
> >http://groups.google.com/group/purduelug?hl=.
>
> > I followed instructions for connecting to PAL 2.0 but I could not
> > connect. Can any one help me.
>
> > regards,
> > Shiv
>
> > --
> > To post to this group, send email to PurdueLU...@googlegroups.com
> > To unsubscribe from this group, send email to
> > PurdueLUG-offi...@googlegroups.com
> > For more options, visit this group at
> >http://groups.google.com/group/PurdueLUG-officer?hl=en
>
> --
> Muhammad Adnan

> mohammad.hy...@gmail.com
> Cell No. : 765-413-4021

[snebtor]

I am using wicd and the instructions posted in this group on may
2009. I just set it up inUbuntu 9.10 and it works great!
Check:
http://groups.google.com/group/PurdueLUG/browse_thread/thread/29eedbe6a8af84ef/4dce7aa3f8ffa9a8?lnk=gst&q=snebtor#4dce7aa3f8ffa9a8