sg-lab transverter 1296-144
314 views
Skip to first unread message
Gary Litteer
Jan 24, 2015, 1:40:57 AM1/24/15
to pnw...@googlegroups.com, gk...@cablespeed.com
Just received my transverter from Bulgaria.
Sure took a long time. It's pretty, silver,
small, and I have no idea how to use
it.
Did anyone receive a manual on it's use
???
I still have a new 900 mhz yagi for trade for a
1296 vert. base or small 1296 yagi.
Gary K7PG / VE7PG
Napavine
Ray W7GLF
Jan 24, 2015, 2:12:01 AM1/24/15
to pnw...@googlegroups.com
is what I have - a web site and a pdf file:
Web site: http://sg-lab.com/TR1300/tr1300.html
The pot adjust not covered in the instructions is for zero beating the frequency but it seemed to be fine when I got it so I did not change it.
With the jumpers you can power the transverter over the IF cable, use the IF cable for PTT of r simply use RF sensing for your PTT (default). Most people I know are using RF sensing for PTT.
Adjust the Rx and Tx level. The Tx level is set for the LED to turn green (don't put more than 5 watts in). I just turned the Rx level all of the way up.
Web site: http://sg-lab.com/TR1300/tr1300.html
The pot adjust not covered in the instructions is for zero beating the frequency but it seemed to be fine when I got it so I did not change it.
With the jumpers you can power the transverter over the IF cable, use the IF cable for PTT of r simply use RF sensing for your PTT (default). Most people I know are using RF sensing for PTT.
Adjust the Rx and Tx level. The Tx level is set for the LED to turn green (don't put more than 5 watts in). I just turned the Rx level all of the way up.
Reply all
Reply to author
Forward
0 new messages