Re: [MOBOKITS] Digest for MOBOKITS@googlegroups.com - 2 Messages in 1 Topic

[Alex Lee]

Marc,

You are using a new version of firmware with a different vid/pid that old software cannot find unless they are modified.

So try to use old version firmware:

http://code.google.com/p/sdr-widget/downloads/detail?name=sdr-widget-2012-10-22.elf&can=2&q=

which has the traditional vid/pid .

Alex

On 25 Mar 2013 19:10, <MOBO...@googlegroups.com> wrote:

  Today's Topic Summary

Group: http://groups.google.com/group/MOBOKITS/topics

• USB not found [2 Updates]

 USB not found

marc olanie <marc....@gmail.com> Mar 24 02:15PM +0100  

Hi Sid
 
Many tnks for you time and patience
 
your datas
[111161.577748] usb 1-3: Product: DG8SAQ-I2C
my datas
[ 1.285589] usb 1-5: >Product: Yoyodyne SDR-Widget
****
 
your datas
[111161.577754] usb 1-3: Manufacturer: www.obdev.at
 
My datas
[ 562.926115] usb 1-5: >Manufacturer: SDR-Widget
 
is the Objective Development " V-USB" mandatory ?
 
 
 
>This is the source code I used.
>"git clone git://github.com/amontefusco/sdr-widget.git && cd sdr-widget &&
git checkout sdr-widget-2 && git pull origin"
 
I'm affraid I'm unable to compile such sources without any n00b-base
Configure file or ready-made package and clear instructions. My knowledge
of Gnu kernels is almost equivalent to the inverse of infinity (apt-get
install : ok, ./configure-make-make install : ok. More than that and I'm
lost. I don't even master simple commands like wget in certain cases)
 
>Looks like settings are wrong or audio-widget firmware loaded.
 
This has been checked many times... I don't think so
 
I'm unable to run widget-control under my unbuntu station (the python
script ends with errors and don't see the widget), but under the Lubuntu
"live GHPSDR3-Alex" version (http://napan.ca/ghpsdr3/index.php/Ghpsdr3-usb)
the configuration is OK, the widget is "seen" and responding (attached
screen capture).
 
btw : how do you run widget-control in character mode ?
 
I never had any problem flashing the firmware under Windows, the widget is
NOT in audio mode, the Si570 is perfectly responding, filters are normaly
switched depending of the crossover table.
 
it seems that the only conflict is between the Libusb and the audio part of
the widget
 
73'
Marc


 

Sid Boyce <boyc...@gmail.com> Mar 24 03:11PM  

****Check if your DAC is cs4344 or es9022 **** as I am not sure which is
used in the latest Widget.
Mine is an older Widget with the cs4344.
 
The widget.hex code is the latest and widget-control is a 64-bit binary.
The command below will say what how it's currently set up.
# ./widget-control -g
10 37 widget uac2_dg8saq normal normal ak5394a cs4344
 
This sets up the above parameters.
# ./widget-control -s 8 27 widget uac2_dg8saq normal normal ak5394a cs4344
 
See what you get from the commands below.
root@sdrbox1:/opt/quisk-3.6.8/softrock# widget-control -g
10 37 widget uac2_dg8saq normal normal ak5394a cs4344
root@sdrbox1:/opt/quisk-3.6.8/softrock# widget-control --help
usage: sudo ./widget-control [options] [values]
options: -d = print the default feature values.
-g = get the feature values from the widget nvram.
-l = list the possible feature values.
-m = get the feature values from the widget ram.
-r = reboot the widget.
-s = set the feature values in the widget nvram.
Only -s takes values, in the form printed by -d or -g or -m.
The acceptable values for each feature are listed by -l.
The major and minor version numbers are optional to -s, but
if provided they must match the ones printed by -d, -g, -l, and -m,
which must all match each other, or your widget-control is out of
sync with your widget.
root@sdrbox1:/opt/quisk-3.6.8/softrock# widget-control -l
major 8
minor 27
board = none widget dib ab1 test
image = flashyblinky uac1_audio uac1_dg8saq uac2_audio uac2_dg8saq
hpsdr test
in = normal swapped
out = normal swapped
adc = none ak5394a
dac = none cs4344 es9022
root@sdrbox1:/opt/quisk-3.6.8/softrock# widget-control -m
10 37 widget uac2_dg8saq normal normal ak5394a cs4344
73 ... Sid.
 
 
On 24/03/13 13:15, marc olanie wrote:
 
--
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
Senior Staff Specialist, Cricket Coach
Microsoft Windows Free Zone - Linux used for all Computing Tasks


 

You received this message because you are subscribed to the Google Group MOBOKITS.
You can post via email.
To unsubscribe from this group, send an empty message.
For more options, visit this group.

--
 
---
You received this message because you are subscribed to the Google Groups "MOBOKITS" group.
To unsubscribe from this group and stop receiving emails from it, send an email to MOBOKITS+u...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.