Problem import DXF

[Juergen]

Hi,

I am using Therm 7.08.80.0.

I have trouble with the "DXF Import as an underlay" option.

I draw closed polylines in Autocad and make sure that only closed polylines are on the drawing, without overlapping but sharing the same borders.

The import as underlay worked fine with a first drawing and then I needed to expand it with more polylines and then the import in Therm gets totally messed up. 

Now some points of closed polylines simply have disappeared and instead of rectangles they have become triangles.

Drawing in Therm is impossible for me, as the whole snap function is not working. It only snaps to the grid, but to nothing else even when every option is activated in the menu.

It leaves me with frustration and the program seems unusable for me at this time.

Any ideas of why this happens??

Thanks a lot

[Zugur Rakhmanov]

Hi Juergen,

Could you provide the .dxf file?

King regards,

Zugur

Пт, 27 февр. 2026 г. в 00:26, Juergen <juergen.d...@gmail.com>:

--
You can view the THERM forum online at:
https://groups.google.com/g/LBNL-THERM
---
You received this message because you are subscribed to the Google Groups "THERM" group.
To unsubscribe from this group and stop receiving emails from it, send an email to LBNL-THERM+...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/LBNL-THERM/4e339e87-64ed-4a99-927f-74043e36387dn%40googlegroups.com.