meshing issue on standard detail.

[Dominik K.]

Good Afternoon,

THERM version 7.8.71.0 - 07/10/23.

I have an issue with one detail. when I run th ecalculation the following error occur:

Check the settings and tried to play with quad mesh - no luck.

However, when pressing OK the calculation runs with a high error %.

Attached is the file.

I have been running the other detail (sill) almost the same layout - it runs fine. 

Thanks 

Dominik

[Robin Mitchell]

I changed the Mesh parameter from 6 to 7 and that allows the file to simulate without issue

--
You can view the THERM forum online at:
https://groups.google.com/g/LBNL-THERM
---
You received this message because you are subscribed to the Google Groups "THERM" group.
To unsubscribe from this group and stop receiving emails from it, send an email to LBNL-THERM+...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/LBNL-THERM/80df91a0-5db4-48e6-b2d4-b946748cb8a2n%40googlegroups.com.

--

Robin Mitchell

Building Technology and Urban Systems Division
Energy Technologies Area
Lawrence Berkeley National Laboratory

[Dominik K.]

Hi Robin,

You gave me an idea, I checked it on another computer and it actually worked. I wonder why it shows an error on the original one?

Dominik

[Robin Mitchell]

The different orientations of the model, ie, sill vs head, can have an affect on how the model is meshed. 

Robin

To view this discussion visit https://groups.google.com/d/msgid/LBNL-THERM/84084034-1261-41e0-b9d0-a2e013bdf8d1n%40googlegroups.com.

[Dominik K.]

The final solution: reinstalling the Therm and all libraries. It is working now on Quad Mesh 7 on both computers. 

Dominik