ubCore 5.51 release
26 views
Skip to first unread message
BruteForce
Jun 12, 2008, 7:20:10 AM6/12/08
to FireAPI
In a couple of days (may be even tomorrow) ubCore 5.51 will be
released. Since I skipped the 5.50 release post, I list here the
CHANGELOG items for both versions, as they appear on the changelog
file included in our setup.
Lots of things have been going on lately and trust me there is more to
come :-)
Dimitris Staikos
1394 R&D Manager
Unibrain
Version 5.51 - Jun 2008
ADDED: Updated ubCore 5.51 manuals
FIXED: SBP2 driver does not recognize dual disks properly
FIXED: Software license unavailable because it was queried too early
during boot from camera driver
FIXED: Image freezing periodically at 60fps in Firei app
ADDED: ubdcam and fidcam debug builds display different graphic than
demo mode.
ADDED: FireBoard800e V.2 appearance in Device Manager
FIXED: FireIIDC and FireViewer video preview performance issues on low
performant PCs
FIXED: FireIIDC and FireViewer pause video display when minimized
FIXED: System Crash when selecting Raw format in Fire-i Application
FIXED: FireViewer port coloring is sometimes incorrect
FIXED: FireCommander: ROMCRC should check all CRCs in the ROM
FIXED: Broadcasts at S400 when broadcast speed is S100 due to the
presence of 1394b S100 devices
FIXED: FireAPIAuthorize improvements
FIXED: FiYuv.dll does not display its properties
FIXED: ubCore installation adds Fire-i application
ADDED: FireViewer - CU bit should indicate port in error
ADDED: FireCommander ADAPTER command to idenfity GUIDs
ADDED: FireCommander add index in PHY regs output
ADDED: FireViewer PHY regs UI improvements
ADDED: ubSwitch can switch a single adapter even when there are
multiple adapters with the same HardwareID
ADDED: ubSwitch to include ALL menu commands
ADDED: ubSwitch to detect disabled adapters
ADDED: ubSwitch displays adapter descriptions instead of Adapter 1,
Adapter 2, etc.
FIXED: ubSwitch Should check if the user canceled the installation
FIXED: ubSwitch - Explorer crash makes tray icon disappear
ADDED: FireViewer to display GUID in adapters submenu
ADDED: FireViewer to display key values in config rom viewer
FIXED: FireViewer: Correct detection between IIDC 1.30 and 1.31
cameras
FIXED: FireIIDC: 'Select Camera' with no cameras produces infinite
messagebox
FIXED: Converting with FiYuv2Rgb produces different results between
the standard formats and raw conversion
ADDED: Add FiGetLUT and FiSetLUT for IMI based unibrain cameras
ADDED: Raw and BW Fire-i cameras load up with an invalid video mode.
ADDED: Add capability in CFiCamera to select the video format with a
GUI
FIXED: FiConvertToRGB24 does conversion to BGR instead of RGB.
FIXED: Any audio compressor does not work
FIXED: FireCommander command line processing
ADDED: FireCommander SelfID output index improvement
Version 5.50 - Feb 2008
ADDED: UBOHCI Multiplexing support for Isochronous DMA Channels
ADDED: Dynamically enable/disable MultiDMA at the OHCI level (#667)
ADDED: UBTWEAK - Add MultiDMAOperation registry setting (#658)
ADDED: FireCommander - MULTIDMA command to dynamically change MultiDMA
operation mode (#687)
ADDED: FireCommander - ISO CAPS command to display totally available
isochronous contexts (#657)
ADDED: Vista FireNet upgraded to NDIS 6.0 for improved performance
ADDED: Unified ubCore+Firei installation (#785)
ADDED: Maximum 64 adapters supported by ALL drivers in ubCore (#766)
ADDED: Firei.DLL support for ALL F7 color codings (#621)
ADDED: Firei.DLL & FireIIDC - Raw mode video display (#622)
ADDED: IIDC driver support for ALL F7 color codings (#624)
FIXED: Firei.DLL video preview stops when user locks workstation or
Vista UAC dialog appears (#795)
ADDED: FireViewer - Add window transparency option (#683)
FIXED: Incorrect packets per request calculation in Firei.DLL (#637)
FIXED: UBDCAM - Incorrect packets per request calculation (#635)
FIXED: UBDCAM - Deadlock if C1394IsochQueue fails (#636)
FIXED: UBOHCI allocates excessive amount of contiguous physical memory
for small image formats causing temporary system freeze (#731)
FIXED: UBOHCI - OhciDeleteDevice can be called multiple times during
PnP causing BSOD (#745)
FIXED: UBOHCI - Failure to attach to lower driver causes BSOD (#746)
FIXED: UBOHCI - OhciIsochDpc is not reentrant and can cause BSOD
(#634)
ADDED: Class Driver - Dynamically configurable PnP enumeration initial
read delay (#705)
ADDED: Class Driver - Dynamically configurable PnP enumeration read-
retry delay (#705)
ADDED: UBTWEAK - Enumeration Read Delay registry setting (#725)
ADDED: UBTWEAK - Enumeration Retry Delay registry setting (#726)
ADDED: Class Driver - Dynamically configurable Minimum Bus Reset
Interval (#689)
ADDED: UBTWEAK - Add MinBusResetInterval registry setting (#686)
ADDED: FireCommander - BRINT command to dynamically change minimum Bus
Reset interval (#688)
ADDED: UBUMAPI - Increased I/O completion priority boost (#144)
FIXED: BFSANITY instead of ASSERT in SBP2 driver to remove BSODs in
debug builds (#773)
FIXED: SBP2 driver only supports 5 adapters (#777)
FIXED: SBP2 - Code accesses C1394_PACKET after completion (#639)
FIXED: UB1394.DLL - RelocateDevice falls into infinite loop (#714)
ADDED: Firei DLL interface auto microdelays on successful reads (#695)
ADDED: FireViewer - Display any camera on the bus (#482)
ADDED: FireViewer - Start Camera should always display format
selection dialog (#674)
ADDED: FireViewer - Add optional heartbeat on display (#715)
ADDED: Editable F7 packet size in UBUI.DLL "Select Video Format"
dialog (#628)
ADDED: UBUI.DLL - Format selection dialog to indicate bandwidth usage
of each format (#671)
ADDED: FireIIDC - Add selected Camera model and serial number on
caption (#675)
ADDED: FireViewer - Add read delay setting (#680)
ADDED: FireViewer - Detect and Display FireSpy devices (#691)
FIXED: FireViewer - Correctly distinguish between 1.30 and 1.31 IIDC
cameras (#595)
FIXED: FireIIDC - Correctly distinguish between 1.30 and 1.31 IIDC
cameras (#592)
FIXED: Firei.DLL - Sony XCD-V50CR will only stream on channels 0-15
even on 1394b mode (#693)
ADDED: FireViewer - Camera Properties and Tooltip show Serial Number
(#696)
ADDED: UBSHARED.DLL - Add CRC16 calculation routines (#719)
ADDED: UB1394.DLL to allow dynamically disabling Hardware License
checks (#740)
FIXED: FireNet broadcasts are at S100 causing big packets to be
dropped (#320)
FIXED: Fire-i Application - F7 pane controls realignment (#623)
FIXED: Fire-i Application - Max Region button does not restore max F7
packet size (#629)
ADDED: Fire-i Application - Added max button for F7 packet size (#630)
FIXED: FireViewer - Problems with loop detection (#668)
FIXED: FireViewer - Must NOT keep adapter channels open when camera is
started without preview (#718)
ADDED: FireCommander - Speed option in read and write commands (#190)
ADDED: FireViewer - Configuration ROM Viewer (#339)
ADDED: FireIIDC - Improved User Interface (#582)
ADDED: FireIIDC - Preview window to display IIDC format info (#585)
ADDED: UB1394.DLL - Adapter evaluation dialog should be displayed only
once (#599)
ADDED: FireCommander - ISO XMIT command allows speed parameter (#652)
FIXED: FireCommander - ISO RCV command should not have idle packets
parameter (#653)
ADDED: FireViewer - PhyCmd commands on port context menu (#659)
ADDED: FireViewer - Device Details ON/OFF for reduced traffic (#660)
FIXED: FireViewer - Proper synchronization between event threads and
main thread (#661)
FIXED: FireViewer - Implement Retry Scheme when reading config ROM
(#662)
ADDED: FireIIDC - Select and start camera from the command line (#669)
ADDED: FireIIDC - Bandwidth usage indication on first tab (#670)
ADDED: FireViewer - Visually indicate Bus Reset initiator(s) with
diagonal lines (#677)
ADDED: FireViewer - Show BR count on caption (#684)
ADDED: FireCommander - PHY command extensions (#685)
ADDED: FireCommander - IRM and SBM phyid aliases for read/write/lock
commands (#699)
ADDED: FireIIDC - Format information should be drawn in user
selectable color for better visibility (#709)
ADDED: FireViewer - Add format information in Video display windows
(#710)
ADDED: FireViewer - Read device ROMs circularly for better performance
(less conflicts) (#717)
ADDED: FireCommander - ROMCRC command (#720)
ADDED: FireViewer - Check ROM CRCs menu command on alive nodes (#721)
ADDED: FireViewer & FireIIDC - Display elapsed time in video
information (#722)
ADDED: FireIIDC - Generate test report after running test (#724)
ADDED: UBOHCI - Add STATUS_1394_LONG_PACKET error code (#729)
FIXED: Fire-i Application - "Failed to Add DivX 6.2.2 Codec (0 Logical
CPUs) to the graph" (#158)
FIXED: FireIIDC creates incorrect window size when image resolution is
higher than screen resolution (#564)
FIXED: Firei.DLL - FiResetCamera doesn't work (#649)
FIXED: FireViewer - Proper error handling in PHY register reads (#712)
FIXED: Fire-i DirectShow libraries should check filename validity
before starting capture (#793)
FIXED: FireIIDC - Improve connection between control and preview
windows (#583)
ADDED: FireIIDC - Video format information should be displayed during
test too (#672)
FIXED: Fire-i application fails on "Install Fire-i Drivers" menu item
(#596)
FIXED: Fire-i application ovewrites previous videos/frames (#790)
ADDED: FireIIDC - Set selected camera icon on main window (#679)
FIXED: FireIIDC - Disable "Restore Size" button as appropriate (#559)
FIXED: FireIIDC - Cannot select video format on stopped camera (#617)
FIXED: FireIIDC - Crash when closing preview window (#584)
FIXED: FireViewer - Improve window size handling on small trees (#627)
ADDED: FireViewer - PING command (#681)
ADDED: FireViewer - Display PHY BASE registers (#678)
ADDED: FireViewer - Display Legend in PHY read dialogs (#692)
FIXED: FireViewer - When loading make sure window is totally within
monitor (#694)
ADDED: FireViewer - Visually indicate SBM on topology (#701)
FIXED: FireCommander - Never start minimized (#673)
FIXED: FireCommander - No active adapter on startup if last active
adapter is removed (#589)
ADDED: FireCommander - PING command (#676)
ADDED: FireCommander - CMSTR command (#188)
ADDED: FireCommander - ABDICATE command (#187)
ADDED: FireCommander - CMSTR command (#651)
ADDED: FireCommander - SPLIT_TIMEOUT command (#650)
ADDED: FireCommander - SBM command to show current SBM phyid (#698)
ADDED: FireCommander - Use RcvFixedDataNH method for iso data receive
(#654)
ADDED: FireCommander - SYNCPOINT command (#666)
ADDED: ISOSTATS - Adjust behaviour according to MultiDMA mode (#713)
released. Since I skipped the 5.50 release post, I list here the
CHANGELOG items for both versions, as they appear on the changelog
file included in our setup.
Lots of things have been going on lately and trust me there is more to
come :-)
Dimitris Staikos
1394 R&D Manager
Unibrain
Version 5.51 - Jun 2008
ADDED: Updated ubCore 5.51 manuals
FIXED: SBP2 driver does not recognize dual disks properly
FIXED: Software license unavailable because it was queried too early
during boot from camera driver
FIXED: Image freezing periodically at 60fps in Firei app
ADDED: ubdcam and fidcam debug builds display different graphic than
demo mode.
ADDED: FireBoard800e V.2 appearance in Device Manager
FIXED: FireIIDC and FireViewer video preview performance issues on low
performant PCs
FIXED: FireIIDC and FireViewer pause video display when minimized
FIXED: System Crash when selecting Raw format in Fire-i Application
FIXED: FireViewer port coloring is sometimes incorrect
FIXED: FireCommander: ROMCRC should check all CRCs in the ROM
FIXED: Broadcasts at S400 when broadcast speed is S100 due to the
presence of 1394b S100 devices
FIXED: FireAPIAuthorize improvements
FIXED: FiYuv.dll does not display its properties
FIXED: ubCore installation adds Fire-i application
ADDED: FireViewer - CU bit should indicate port in error
ADDED: FireCommander ADAPTER command to idenfity GUIDs
ADDED: FireCommander add index in PHY regs output
ADDED: FireViewer PHY regs UI improvements
ADDED: ubSwitch can switch a single adapter even when there are
multiple adapters with the same HardwareID
ADDED: ubSwitch to include ALL menu commands
ADDED: ubSwitch to detect disabled adapters
ADDED: ubSwitch displays adapter descriptions instead of Adapter 1,
Adapter 2, etc.
FIXED: ubSwitch Should check if the user canceled the installation
FIXED: ubSwitch - Explorer crash makes tray icon disappear
ADDED: FireViewer to display GUID in adapters submenu
ADDED: FireViewer to display key values in config rom viewer
FIXED: FireViewer: Correct detection between IIDC 1.30 and 1.31
cameras
FIXED: FireIIDC: 'Select Camera' with no cameras produces infinite
messagebox
FIXED: Converting with FiYuv2Rgb produces different results between
the standard formats and raw conversion
ADDED: Add FiGetLUT and FiSetLUT for IMI based unibrain cameras
ADDED: Raw and BW Fire-i cameras load up with an invalid video mode.
ADDED: Add capability in CFiCamera to select the video format with a
GUI
FIXED: FiConvertToRGB24 does conversion to BGR instead of RGB.
FIXED: Any audio compressor does not work
FIXED: FireCommander command line processing
ADDED: FireCommander SelfID output index improvement
Version 5.50 - Feb 2008
ADDED: UBOHCI Multiplexing support for Isochronous DMA Channels
ADDED: Dynamically enable/disable MultiDMA at the OHCI level (#667)
ADDED: UBTWEAK - Add MultiDMAOperation registry setting (#658)
ADDED: FireCommander - MULTIDMA command to dynamically change MultiDMA
operation mode (#687)
ADDED: FireCommander - ISO CAPS command to display totally available
isochronous contexts (#657)
ADDED: Vista FireNet upgraded to NDIS 6.0 for improved performance
ADDED: Unified ubCore+Firei installation (#785)
ADDED: Maximum 64 adapters supported by ALL drivers in ubCore (#766)
ADDED: Firei.DLL support for ALL F7 color codings (#621)
ADDED: Firei.DLL & FireIIDC - Raw mode video display (#622)
ADDED: IIDC driver support for ALL F7 color codings (#624)
FIXED: Firei.DLL video preview stops when user locks workstation or
Vista UAC dialog appears (#795)
ADDED: FireViewer - Add window transparency option (#683)
FIXED: Incorrect packets per request calculation in Firei.DLL (#637)
FIXED: UBDCAM - Incorrect packets per request calculation (#635)
FIXED: UBDCAM - Deadlock if C1394IsochQueue fails (#636)
FIXED: UBOHCI allocates excessive amount of contiguous physical memory
for small image formats causing temporary system freeze (#731)
FIXED: UBOHCI - OhciDeleteDevice can be called multiple times during
PnP causing BSOD (#745)
FIXED: UBOHCI - Failure to attach to lower driver causes BSOD (#746)
FIXED: UBOHCI - OhciIsochDpc is not reentrant and can cause BSOD
(#634)
ADDED: Class Driver - Dynamically configurable PnP enumeration initial
read delay (#705)
ADDED: Class Driver - Dynamically configurable PnP enumeration read-
retry delay (#705)
ADDED: UBTWEAK - Enumeration Read Delay registry setting (#725)
ADDED: UBTWEAK - Enumeration Retry Delay registry setting (#726)
ADDED: Class Driver - Dynamically configurable Minimum Bus Reset
Interval (#689)
ADDED: UBTWEAK - Add MinBusResetInterval registry setting (#686)
ADDED: FireCommander - BRINT command to dynamically change minimum Bus
Reset interval (#688)
ADDED: UBUMAPI - Increased I/O completion priority boost (#144)
FIXED: BFSANITY instead of ASSERT in SBP2 driver to remove BSODs in
debug builds (#773)
FIXED: SBP2 driver only supports 5 adapters (#777)
FIXED: SBP2 - Code accesses C1394_PACKET after completion (#639)
FIXED: UB1394.DLL - RelocateDevice falls into infinite loop (#714)
ADDED: Firei DLL interface auto microdelays on successful reads (#695)
ADDED: FireViewer - Display any camera on the bus (#482)
ADDED: FireViewer - Start Camera should always display format
selection dialog (#674)
ADDED: FireViewer - Add optional heartbeat on display (#715)
ADDED: Editable F7 packet size in UBUI.DLL "Select Video Format"
dialog (#628)
ADDED: UBUI.DLL - Format selection dialog to indicate bandwidth usage
of each format (#671)
ADDED: FireIIDC - Add selected Camera model and serial number on
caption (#675)
ADDED: FireViewer - Add read delay setting (#680)
ADDED: FireViewer - Detect and Display FireSpy devices (#691)
FIXED: FireViewer - Correctly distinguish between 1.30 and 1.31 IIDC
cameras (#595)
FIXED: FireIIDC - Correctly distinguish between 1.30 and 1.31 IIDC
cameras (#592)
FIXED: Firei.DLL - Sony XCD-V50CR will only stream on channels 0-15
even on 1394b mode (#693)
ADDED: FireViewer - Camera Properties and Tooltip show Serial Number
(#696)
ADDED: UBSHARED.DLL - Add CRC16 calculation routines (#719)
ADDED: UB1394.DLL to allow dynamically disabling Hardware License
checks (#740)
FIXED: FireNet broadcasts are at S100 causing big packets to be
dropped (#320)
FIXED: Fire-i Application - F7 pane controls realignment (#623)
FIXED: Fire-i Application - Max Region button does not restore max F7
packet size (#629)
ADDED: Fire-i Application - Added max button for F7 packet size (#630)
FIXED: FireViewer - Problems with loop detection (#668)
FIXED: FireViewer - Must NOT keep adapter channels open when camera is
started without preview (#718)
ADDED: FireCommander - Speed option in read and write commands (#190)
ADDED: FireViewer - Configuration ROM Viewer (#339)
ADDED: FireIIDC - Improved User Interface (#582)
ADDED: FireIIDC - Preview window to display IIDC format info (#585)
ADDED: UB1394.DLL - Adapter evaluation dialog should be displayed only
once (#599)
ADDED: FireCommander - ISO XMIT command allows speed parameter (#652)
FIXED: FireCommander - ISO RCV command should not have idle packets
parameter (#653)
ADDED: FireViewer - PhyCmd commands on port context menu (#659)
ADDED: FireViewer - Device Details ON/OFF for reduced traffic (#660)
FIXED: FireViewer - Proper synchronization between event threads and
main thread (#661)
FIXED: FireViewer - Implement Retry Scheme when reading config ROM
(#662)
ADDED: FireIIDC - Select and start camera from the command line (#669)
ADDED: FireIIDC - Bandwidth usage indication on first tab (#670)
ADDED: FireViewer - Visually indicate Bus Reset initiator(s) with
diagonal lines (#677)
ADDED: FireViewer - Show BR count on caption (#684)
ADDED: FireCommander - PHY command extensions (#685)
ADDED: FireCommander - IRM and SBM phyid aliases for read/write/lock
commands (#699)
ADDED: FireIIDC - Format information should be drawn in user
selectable color for better visibility (#709)
ADDED: FireViewer - Add format information in Video display windows
(#710)
ADDED: FireViewer - Read device ROMs circularly for better performance
(less conflicts) (#717)
ADDED: FireCommander - ROMCRC command (#720)
ADDED: FireViewer - Check ROM CRCs menu command on alive nodes (#721)
ADDED: FireViewer & FireIIDC - Display elapsed time in video
information (#722)
ADDED: FireIIDC - Generate test report after running test (#724)
ADDED: UBOHCI - Add STATUS_1394_LONG_PACKET error code (#729)
FIXED: Fire-i Application - "Failed to Add DivX 6.2.2 Codec (0 Logical
CPUs) to the graph" (#158)
FIXED: FireIIDC creates incorrect window size when image resolution is
higher than screen resolution (#564)
FIXED: Firei.DLL - FiResetCamera doesn't work (#649)
FIXED: FireViewer - Proper error handling in PHY register reads (#712)
FIXED: Fire-i DirectShow libraries should check filename validity
before starting capture (#793)
FIXED: FireIIDC - Improve connection between control and preview
windows (#583)
ADDED: FireIIDC - Video format information should be displayed during
test too (#672)
FIXED: Fire-i application fails on "Install Fire-i Drivers" menu item
(#596)
FIXED: Fire-i application ovewrites previous videos/frames (#790)
ADDED: FireIIDC - Set selected camera icon on main window (#679)
FIXED: FireIIDC - Disable "Restore Size" button as appropriate (#559)
FIXED: FireIIDC - Cannot select video format on stopped camera (#617)
FIXED: FireIIDC - Crash when closing preview window (#584)
FIXED: FireViewer - Improve window size handling on small trees (#627)
ADDED: FireViewer - PING command (#681)
ADDED: FireViewer - Display PHY BASE registers (#678)
ADDED: FireViewer - Display Legend in PHY read dialogs (#692)
FIXED: FireViewer - When loading make sure window is totally within
monitor (#694)
ADDED: FireViewer - Visually indicate SBM on topology (#701)
FIXED: FireCommander - Never start minimized (#673)
FIXED: FireCommander - No active adapter on startup if last active
adapter is removed (#589)
ADDED: FireCommander - PING command (#676)
ADDED: FireCommander - CMSTR command (#188)
ADDED: FireCommander - ABDICATE command (#187)
ADDED: FireCommander - CMSTR command (#651)
ADDED: FireCommander - SPLIT_TIMEOUT command (#650)
ADDED: FireCommander - SBM command to show current SBM phyid (#698)
ADDED: FireCommander - Use RcvFixedDataNH method for iso data receive
(#654)
ADDED: FireCommander - SYNCPOINT command (#666)
ADDED: ISOSTATS - Adjust behaviour according to MultiDMA mode (#713)
Reply all
Reply to author
Forward
0 new messages