Groups

ExtrusionBot

Contact owners and managers

1–8 of 44

Welcome to the ExtrusionBot Google Group.
it is my hope that this group can serve as a central place to find information or get questions answered as we all learn more about our extrusionBot hopefully we can help others come up to speed easier.

0 selected

10/20/13

Check your Kits for this problem !

I have confirmed with Mark that the Heater band voltage printed on the side of the heater band should

unread,

Check your Kits for this problem !

I have confirmed with Mark that the Heater band voltage printed on the side of the heater band should

10/20/13

frank westerman4

4/23/14

why is filament sensor not working correctly?

When I tryied to test the unit when I got it back the heater didn't work so I had to return it

unread,

why is filament sensor not working correctly?

When I tryied to test the unit when I got it back the heater didn't work so I had to return it

4/23/14

Вадим Пьянков, Herb Winters4

1/5/14

Problem with abs extrusion

okay do you have a volt meter can you measure the voltage on the Red/Black wires that come out of the

unread,

Problem with abs extrusion

okay do you have a volt meter can you measure the voltage on the Red/Black wires that come out of the

1/5/14

Staston Lombardi, Herb Winters3

12/12/13

filament diameter

ABS at 243 C Le jeudi 12 décembre 2013 01:44:26 UTC+1, Herb Winters a écrit : are you using ABS or

unread,

filament diameter

ABS at 243 C Le jeudi 12 décembre 2013 01:44:26 UTC+1, Herb Winters a écrit : are you using ABS or

12/12/13

Peoples-Exchange, … Tim Elmore13

1/7/14

Low Pellet Detection Buzzer Constantly On

Thanks! That does look like a good option and all things considered its reasonably priced. Is anyone

unread,

Low Pellet Detection Buzzer Constantly On

Thanks! That does look like a good option and all things considered its reasonably priced. Is anyone

1/7/14

Staston Lombardi, Herb Winters15

11/22/13

Main Motor problem

Great find, That was a difficult to find problem at least if it happens again we will know what to

unread,

Main Motor problem

Great find, That was a difficult to find problem at least if it happens again we will know what to

11/22/13

cgiffen, Herb Winters5

10/5/13

Via mail. I agree a STL would help a lot of folks. I already cracked mine screwing the bearing in. It

unread,

Via mail. I agree a STL would help a lot of folks. I already cracked mine screwing the bearing in. It

10/5/13

jason carlisle, … cgiffen6

10/4/13

Rubber stopper things

I'm interesting in it

unread,

Rubber stopper things

I'm interesting in it

10/4/13

Herb Winters, … David Randolph9

10/20/13

Problems with chain skipping

Noticed that the chain wasn't lining up and twisted in your original photo and I also noticed

unread,

Problems with chain skipping

Noticed that the chain wasn't lining up and twisted in your original photo and I also noticed

10/20/13

Search

Clear search

Close search

Google apps

Main menu