Working pins

[mpa...@gmail.com]

Dear Todor,

We tried the pins with Claudio's testing programme.
The only ones that are not working are:
ports: PA00-PA02 and PA10-PA15 and PA17-PA18 (PA10-19 don't exist at
all, but two of them work:P)
PB is gooood.
So the pins that we cannot use are:
pins 3-5 (not working)
pins 15-23 (Timer\counter)
pins 25-27 (interrupts)

To sum up: there is enough pins for all the LEDs.

When you decide which pins are to be used, we'll enable them in
setup.c.
We had some doubts whether there is anything to be done within the
setup.c. But there is something - you have to enable the pin to be
able to write something (but you can configure without enabling :P).

Enjoy your stay in Bulgaria, I hope you won't read this until Friday.

Michal and Claudio.

[Todor]

Hi Michal and Claudio,

Thank you for the useful information!

I will check it out more thoroughly as soon as I start designing the
schematic. I hope I will present you with some details on Tuesday.

Kind regards,
Todor