new track layout!

[ben]

pics of the new track layout are on sunrise's website if anyone wants
to check them out

[ben]

has anyone been out to the new track for some practice been dyeing to
get there but tons of stuff to do around here i will be there sunday
for sure

[REVO RACER]

ive been there twice now. its AWESOME! i cant wait till sunday!

> > to check them out- Hide quoted text -
>
> - Show quoted text -

[Eduardo Jose Molina Montero]

Guys, last week I took my buggy 2.0 to clean it (this is the first time I take it a part). So far I have done the front part of the car. I used the manual that came with car to put it back together but the manual it is for the race roller, so there are a few differences.
 
At the end of putting everything back together I noticed I had four small metal plates left on the box. Please see the picture attached, the parts that i'm talking about are within the red "square"
 
So the question is, should I take everything a part and re-add those small plates? Or should I just not added? Looking at the part explosion for the RTR it does show them but they are not there for the Race roller, now the race roll and the RTR have a slightly different diff case. 
 
Thanks,
   Eduardo
 

This link shows the part explosion for the RTR, http://www.losi.com/ProdInfo/Files/82RTRPartsExpl.pdf
This link shows the part explosion for the Race Roller, http://www.losi.com/ProdInfo/Files/8ight2PartsExp.pdf

 

[ben]

if you are talking about the square pieces of metal i would definitely
put those back in those apparently hold the diff gears and shaft in
place inside the diff cup i have a 8ight t 2.0 race roller and mine
does not have those pieces in there i would put them back in there
there are alot more people on here that has more knowledge than i do
hopefully they will chime in also if you dont get it back together or
get ur question answered come to the track there are alot of 8ight
buggies out there so someone would probally help u out

On Aug 15, 1:56 am, Eduardo Jose Molina Montero

<emolina_mont...@hotmail.com> wrote:
> Guys, last week I took my buggy 2.0 to clean it (this is the first time I take it a part). So far I have done the front part of the car. I used the manual that came with car to put it back together but the manual it is for the race roller, so there are a few differences.
>
> At the end of putting everything back together I noticed I had four small metal plates left on the box. Please see the picture attached, the parts that i'm talking about are within the red "square"
>
> So the question is, should I take everything a part and re-add those small plates? Or should I just not added? Looking at the part explosion for the RTR it does show them but they are not there for the Race roller, now the race roll and the RTR have a slightly different diff case.
>
> Thanks,
>
>    Eduardo
>

> This link shows the part explosion for the RTR,http://www.losi.com/ProdInfo/Files/82RTRPartsExpl.pdf

> This link shows the part explosion for the Race Roller,http://www.losi.com/ProdInfo/Files/8ight2PartsExp.pdf
>

>  front_diff.JPG
> 22KViewDownload

[rc_racer]

DO NOT I REPEAT DO NOT RUN YOUR BUGGY UNTIL YOU PUT THEM BEVEL GEAR
RETAINERS BACK IN IF YOU DONT YOU WILL BLOW YOUR DIFF UP

[Molikop]

Thank you guys, I finish putting everything back together last night
and I added the retainers back. I should get the car going this week.
Hopefully is going to work. It was definitely a learning expirience.

> > > 22KViewDownload- Hide quoted text -

[Molikop]

Loonie,
I was putting the radio in the car together last night but seems
like the steering is really tight. Any ideas what to check?

> > - Show quoted text -- Hide quoted text -

[ben]

heuy molikop what do u mean by the steering is really tight

[rc_racer]

I need to see it impossible to diagnose without seeing it most likely
you re assembled it and have something crooked

[Eduardo Jose Molina Montero]

Basically when the engine is not running and I'm checking the steering with the remote it moves very slow, but if i'm running the car around my front street y turns very well. I don't remember if this was the case before I took it a part.

Loonie,

   The car is back together, when will you have a chance to take a look to it? where should we meet?

> Date: Mon, 24 Aug 2009 14:57:09 -0700
> Subject: [CONRCC:1734] Re: Help with my Losi 8ight 2.0 please
> From: ben.g...@insightbb.com
> To: CON...@googlegroups.com

[Eduardo Jose Molina Montero]

I thought the same thing... do you have any time this week so we can get together and check my buggy?

> Date: Mon, 24 Aug 2009 18:50:28 -0700
> Subject: [CONRCC:1738] Re: Help with my Losi 8ight 2.0 please
> From: mind...@peoplepc.com
> To: CON...@googlegroups.com

[rc_racer]

i have time any time you do my man just let me know e mail me it goes
straight to my cell rc_r...@tmo.blackberry.net

On Aug 26, 3:04 pm, Eduardo Jose Molina Montero

<emolina_mont...@hotmail.com> wrote:
> I thought the same thing... do you have any time this week so we can get together and check my buggy?
>
> > Date: Mon, 24 Aug 2009 18:50:28 -0700
> > Subject: [CONRCC:1738] Re: Help with my Losi 8ight 2.0 please

> > From: mindyz...@peoplepc.com

[rc_racer]

racer

On Aug 26, 3:40 pm, rc_racer <mindyz...@peoplepc.com> wrote:
> i have time any time you do my man just let me know e mail me it goes

> straight to my cell rc_ra...@tmo.blackberry.net