2007 B373 Grab Rails

[William C Bonner]

My grab rails need to be sanded clean and varnished. Where do I get replacement plugs if I want to take these completely off the boat to do the work? 

Also is there a specific varnish that’s recommended? (I’m in Seattle and I don’t expect to take the boat south of here in the next few years)

[DAVID FLETCHER]

Most chandler’s will have them. Be sure to use a hole cutter a little smaller. After you cut the plug out measure the hole. A small piece of teak and a hole cutter will make a bunch of plugs. Best to use a drill press makes them straight

Sent from my iPhone

On May 10, 2024, at 5:08 PM, William C Bonner <wimb...@gmail.com> wrote:

My grab rails need to be sanded clean and varnished. Where do I get replacement plugs if I want to take these completely off the boat to do the work? 

Also is there a specific varnish that’s recommended? (I’m in Seattle and I don’t expect to take the boat south of here in the next few years)

<IMG_0898.jpg>

--
Largest Beneteau group, over **1500** members and growing.
 
To post to this group, send email to Benetea...@googlegroups.com
To unsubscribe from this group, send email to Beneteau-Owne...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/Beneteau-Owners
Contact beno...@gmail.com if you have a list management question
---
You received this message because you are subscribed to the Google Groups "Beneteau Owners" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beneteau-owne...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/beneteau-owners/CALqHiHPSuQ%2Bc4WAtwD80eXmhn6e%2BVZcm-fErWwvpGeWtwvcmeA%40mail.gmail.com.