VDO Volt/Fuel/Water gauge

[Gos2017]

Hi all

Vessel - Beneteau Cyclades 393 (2007)

On my switch panel I have a (pic attached) VDO gauge that, with the press of different switches, shows voltage batt1/batt2, fuel level and fresh water level. The gauge has stopped working and I can't seem top find a replacement through VDO. I'm guessing it was made specifically for Beneteau. Beneteau also does not list it as a spare part.

Part number on gauge - 301 010 002, 3-180ohm 12v

Any Ideas where I could source a replacement? Suggestions for alternatives?

All help appreciated.

[Jim O'Neill]

Try this:

https://marine.vdo-gauges.com/instruments/by-type/water-level.html

Sent from my iPad   Jim ONeill

--
Largest Beneteau group, over **1121
** members and growing.
 
To post to this group, send email to Benetea...@googlegroups.com
To unsubscribe from this group, send email to Beneteau-Owne...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/Beneteau-Owners
contact denny.we...@gmail.com, or ume...@comcast.net if you have a list management question
---
You received this message because you are subscribed to the Google Groups "Beneteau Owners" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beneteau-owne...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

<VDO Gauge.jpg>

[Jim O'Neill]

Also the sender unit inside the water tank might have gone bad that’s what happened to mine on my 42cc.

Sent from my iPad   Jim ONeill

On May 5, 2019, at 6:43 PM, Gos2017 <aa.go...@gmail.com> wrote:

--
Largest Beneteau group, over **1121
** members and growing.
 
To post to this group, send email to Benetea...@googlegroups.com
To unsubscribe from this group, send email to Beneteau-Owne...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/Beneteau-Owners
contact denny.we...@gmail.com, or ume...@comcast.net if you have a list management question
---
You received this message because you are subscribed to the Google Groups "Beneteau Owners" group.
To unsubscribe from this group and stop receiving emails from it, send an email to beneteau-owne...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

<VDO Gauge.jpg>

[Gos2017]

Hi Jim

Thanks for the input. The needle won't move on any of the three functions so I am pretty sure it is the gauge rather than the senders, if nothing else at least the voltage would show if gauge was working.

Wondering now if I could take the face plate out and put it into a generic vdo gauge?

Cheers

Gos

On Monday, 6 May 2019 10:45:57 UTC+10, Jim O wrote:

Also the sender unit inside the water tank might have gone bad that’s what happened to mine on my 42cc.

Sent from my iPad   Jim ONeill

On May 5, 2019, at 6:43 PM, Gos2017 <aa.g...@gmail.com> wrote:

Hi all

Vessel - Beneteau Cyclades 393 (2007)

On my switch panel I have a (pic attached) VDO gauge that, with the press of different switches, shows voltage batt1/batt2, fuel level and fresh water level. The gauge has stopped working and I can't seem top find a replacement through VDO. I'm guessing it was made specifically for Beneteau. Beneteau also does not list it as a spare part.

Part number on gauge - 301 010 002, 3-180ohm 12v

Any Ideas where I could source a replacement? Suggestions for alternatives?

All help appreciated.

--
Largest Beneteau group, over **1121
** members and growing.
 
To post to this group, send email to Benetea...@googlegroups.com
To unsubscribe from this group, send email to Beneteau-Owne...@googlegroups.com
For more options, visit this group at http://groups.google.com/group/Beneteau-Owners

contact denny.w...@gmail.com, or ume...@comcast.net if you have a list management question

---
You received this message because you are subscribed to the Google Groups "Beneteau Owners" group.

To unsubscribe from this group and stop receiving emails from it, send an email to benetea...@googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

<VDO Gauge.jpg>

[Jim O'Neill]

Gos,

Sorry I couldn’t be more help, I didn’t look at your photo close enough, didn’t realize it was a multi function gauge. I have separate gauges for the Battery, water levels and fuel. 

Sent from my iPad   Jim ONeill

contact denny.we...@gmail.com, or ume...@comcast.net if you have a list management question

---
You received this message because you are subscribed to the Google Groups "Beneteau Owners" group.

To unsubscribe from this group and stop receiving emails from it, send an email to beneteau-owne...@googlegroups.com.

[Gos2017]

Hi Jim
All good mate...as mentioned, all help appreciated!
Cheers
Gos