FS: $2700 58cm Grand Bois ER650 frameset with two racks

[belopol...@gmail.com]

I recently got this frame and fork back from Kyoto after a complete repaint, also had a custom porteur rack made, along with a smaller rack.

The frame has internal routing for the rear tail light, internal routing for the front light.

There is only one of me, and I do not need as many bikes as I have. Really a wonderful frame from the little bit of riding I did do, but I have a 700c Grand Bois that I ride most often if I'm not out on my other bikes.

Will include with sale:

* Two racks
* rear tail light
* front Busch and Mueller light
* headset
* seat binder bolt
* rear brake hanger
* front brake hanger.
* Honjo fenders

The rear brake hanger is a Nitto, the front brake hanger is a custom one that Grand Bois makes and sells.

The fenders I used previously on this frame. There is one extra hole in the front fender because the previous rack that supported the fender had a different fitting.

The frame is 58cm. Seat tube is 56cm center to center, Top Tube 56cm center to center.
100mm/130mm.

650x42mm clearance with fenders.

The frame is wired for the front and rear light. There are connectors at the mid-fork so that the rack can be removed more-easily. One of the wires requires the stripped end to be wrapped around a bolt for grounding.

Photos: https://imgur.com/a/FMfGupu

$2700 shipped in the USA

[belopol...@gmail.com]

The small rack has sold, so dropping the asking price to $2600

[belopol...@gmail.com]

$2500

[belopol...@gmail.com]

And sold!