PSA for Fiberon ASA-CF

[Bryan Murphy]

A word of warning: Polymaker Fiberon ASA-CF really really really likes Elegoo's textured PEI plate (Centauri Carbon plate side A).  I haven't had to do this much scraping in a couple years.

I had some nano polymer adhesive on the plate, although I have done a number of prints since I last cleaned and refreshed it. It's definitely not acting as a "release" agent right now. 

I even cracked the bottom of a calibration cube trying to get it to release!

Bryan

[Kurt]

That's funny Bryan - as I believe I have only seen ONE other person on this forum - who has used the Nano stuff form VisionMiner! Maybe you should tell them about this problem - as see what they have to say - since it is NOT Releasing properly!!!

-K

[Bryan Murphy]

Side B with glue stick turned out alright.  It'll be interesting to try a bigger print and see if I get any warping.  If anything I had too little adhesion with the previous roll of ASA (Overture I think) I printed with the CC1.

--
You received this message because you are subscribed to the Google Groups "3D Printing Tips and Tricks" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 3d-printing-tips--...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/3d-printing-tips--tricks/56683691-d7db-40b1-a1b4-a316da744cccn%40googlegroups.com.

[Jody Harris]

In my experience, it seems to release from PEI coated build plates onto the model, so I had to reapply it after every couple of prints. On glass - brilliant! On PEI sheets.... less so. I found it vastly superior at protecting my one glass build plate (now retired) when compared to Aqua Net. Aqua Net has been a clear winner with coated PEI.

YMMV

-j

Think carefully

--

[Jody Harris]

Clarification: I was printing only PETG and PCTG, not ASA or anything else.

-j

Think carefully

To view this discussion visit https://groups.google.com/d/msgid/3d-printing-tips--tricks/91ptaOEl_G841b3cNShPWv32Uy2X3TA9YgMqbB4vext2PCRLvvKLELR8g-jKltEjzjvhzfBFLlNsCjpup4MQZcIChgfZjs1hJVq2s7Yt61k%3D%40harrisdev.com.