3D Printing Today #503

[3D Printing Tips and Tricks]

News: 

Schenzhen’s Elegoo announces an Orangestorm

https://3dprintingindustry.com/news/orangestorm-giga-elegoos-new-industrial-grade-fdm-3d-printer-for-large-scale-printing-225866/

Segments: 

Burnt Titanium, Intro to Drone based Photogrammetry, Battling  Plastic Bots

https://robotcombatwiki.com/wiki/3D_Printing

Thing of the Week: 

Betz Beating Dual Rotor Wind Turbine

https://www.thingiverse.com/thing:6194724

threedprintingtoday.libsyn.com or 

Search for 3D Printing Today wherever you get your podcasts

[3D Printing Tips and Tricks]

Burnt titanium

[3D Printing Tips and Tricks]

The barn scan

On Wednesday, November 15, 2023 at 12:28:12 PM UTC-8 3D Printing Tips and Tricks wrote:

[vr...@optonline.net]

Interesting pic. Although, not exactly sure what I am looking at. Is this "Burnt titanium" a new kind of filament? Of course, I know the answer WILL be discussed on the podcast when its released tomorrow...

-K

 

------ Original Message ------
From: 3d-printing-...@googlegroups.com
To: 3d-printing-...@googlegroups.com
Sent: Wednesday, November 15, 2023 3:36 PM
Subject: Re: 3D Printing Today #503

Burnt titanium

On Wednesday, November 15, 2023 at 12:28:12 PM UTC-8 3D Printing Tips and Tricks wrote:
 

 

-- 
You received this message because you are subscribed to the Google Groups "3D Printing Tips and Tricks" group.
To unsubscribe from this group and stop receiving emails from it, send an email to unsub...@googlegroups.com">3d-printing-tips--tricks+unsub...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/3d-printing-tips--tricks/14b09c4f-c1e1-46e2-a8fb-f4ad37f300fdn%40googlegroups.com.
 

[3D Printing Tips and Tricks]

Yeah, it's Flashforge PLA.

[vr...@optonline.net]

Yeah - I listened to your podcast today - finishing it up now. I had to laugh when Whitney kept making jokes about No Metal in the filament. But, along the lines of "No Metal Was Harmed". 

OMG - am listening to the end, and Whitney is doing a Brit Accent - very Hysterical. Which is why I like listening to you guys - its Funny AND Informative for a podcast. ALWAYS Entertaining for sure!

 

Thanks again for another FUN Podcast Sir!!!

-K

 

------ Original Message ------
From: 3d-printing-...@googlegroups.com
To: 3d-printing-...@googlegroups.com

Sent: Wednesday, November 15, 2023 10:33 PM
Subject: Re: Re: 3D Printing Today #503
Yeah, it's Flashforge PLA.

 

On Wednesday, November 15, 2023 at 1:34:17 PM UTC-8 vrfx wrote:
 

To view this discussion on the web visit https://groups.google.com/d/msgid/3d-printing-tips--tricks/6ea24be7-28c2-4c48-8cd2-b058ea3324acn%40googlegroups.com.
 

[Justus Cook]

What got me printing a lot more again was combat robotics.  I have been iterating on a 1 pound design and its pretty fun.  I am actually using OnShape and like it so far, it's different than F360 but being free and in the browser is perfect for me.

[Kurt Wendt]

I didn't think that Onshape was free. That's news to me.

To unsubscribe from this group and stop receiving emails from it, send an email to 3d-printing-tips--...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/3d-printing-tips--tricks/7c39b21d-9b27-41e8-84f9-d83d8a39421en%40googlegroups.com.

[3D Printing Tips and Tricks]

You can play with it for free, but ya gotta pay to actually use it and export files as meshes.

[Scott Bussinger]

You can use OnShape for free, but you can’t have any private files. So anything you design in the free version is publicly visible.

 

I like that it’s not installed and runs in a browser. Amazing what they can do like that.

To view this discussion on the web visit https://groups.google.com/d/msgid/3d-printing-tips--tricks/ad5c5d2f-af68-46e6-8235-a085e2effb51%40optonline.net.

 

[mroek]

Yes, and this is why I really dislike Onshape. Forcing all designs to be publicly visible is a complete no-go for me, and as soon as you want private files

they charge a very high premium.

I used Onshape when they were just starting, and promises were made that they have since broken. I moved over to F360 and I haven't looked back. I do pay

for F360 though, but it is a lot less than Onshape.

[vr...@optonline.net]

Yeah Mroek - I Completely agree with you - offering up my design files to the world for FREE is SIMPLY NOT Something I would do! Sure, somethings I would not mind offering up - and I would also post them on Thingiverse. But, MOST Things - that's a NO GO for me too!!!

-K

 

------ Original Message ------
From: mro...@gmail.com
To: 3d-printing-...@googlegroups.com
Sent: Sunday, November 19, 2023 5:49 PM
Subject: Re: 3D Printing Today #503
 

Yes, and this is why I really dislike Onshape. Forcing all designs to be publicly visible is a complete no-go for me, and as soon as you want private files

they charge a very high premium.

 

I used Onshape when they were just starting, and promises were made that they have since broken. I moved over to F360 and I haven't looked back. I do pay

for F360 though, but it is a lot less than Onshape.
 

 

On Sunday, November 19, 2023 at 10:10:49 PM UTC+1 Scott Bussinger wrote:
 

To view this discussion on the web visit https://groups.google.com/d/msgid/3d-printing-tips--tricks/ee16d762-ec4d-43f8-83c5-bf59d202fbc1n%40googlegroups.com.