3D Printing Yesterday (Repeat from July 2015)

[3D Printing Tips and Tricks]

News: 

AutoDesk release open source files for Ember

https://spark.autodesk.com/ember

Segments: 

Infill types for bottoms, Make your own Cells Bowl, BronzeFill, The problem with today’s 3D Printers, Tinkerplay

Infill types for bottoms

 Make your own Cells Bowl

 BronzeFill

 The problem with today’s 3D Printers

 TinkerplayWhitney's how to video :https://www.youtube.com/watch?v=8URoX2KfBSY

http://colorfabb.com/bronzefill

Thing of the Week: 

Delicate Arch

http://www.thingiverse.com/thing:18224

threedprintingtoday.libsyn.com or 

Search for 3D Printing Today wherever you get your podcasts

[david merten]

I can't get the ember link to work.

             David

--
You received this message because you are subscribed to the Google Groups "3D Printing Tips and Tricks" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 3d-printing-tips--...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/3d-printing-tips--tricks/3610c18e-8240-47d7-8181-e9b08d4b823en%40googlegroups.com.

[3D Printing Tips and Tricks]

Chances are the links in the notes are dead. After all it was 11 years ago.

[Bryan Eckert]

You can get the fusion 360 model for the ember here:

https://www.autodesk.com/community/gallery/project/22056/ember

Firmware is available on git-hub.

To view this discussion visit https://groups.google.com/d/msgid/3d-printing-tips--tricks/ba16de9e-d46c-4578-a09d-e94d0f5b470fn%40googlegroups.com.