Helios thermal analysis

[3D Printing Tips and Tricks]

It’s in the latest version of Bambu Studio and it works for the “X” versions of their machines.I  tried it on my X1C with a fairly simple print and it showed it at about  a rating of 20. Which it says is good. I’m not sure what to do if it was a bad number beyond making the bed and extruder hotter.

No idea if this is real or not and I don’t see a way to test it. If it’s real it’s pretty cool idea and yet another thing Bambu has that others don’t.

[Kurt The 3D Printer GUY!!]

Andy - is there a link to what this is - so we can look into it a bit deeper?

-K

[Brisco Humes]

This seems to explain it a bit; it looks pretty interesting.  Sadly, I don't have a Bambu to try it out :/

https://wiki.helioadditive.com/en/bambu-studio

--
You received this message because you are subscribed to the Google Groups "3D Printing Tips and Tricks" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 3d-printing-tips--...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/3d-printing-tips--tricks/50553d6a-c61a-47ff-b78e-f30e45e09c25n%40googlegroups.com.

[Bryan Eckert]

Kurt here's a discussion on Bambu's forum:

https://forum.bambulab.com/t/helio-simulation/188021

--

[3D Printing Tips and Tricks]

We looked at it while recording...

It's a pay for feature... well for the "optimizations" anyway. Zero details on exactly how it does any optimization. We beat on the sim eval though and found little real value there as well.