Voron 2.4 build

[Daniel Rosen]

There is an old saying that every man should plant a tree, have a child, write a book... and build his own 3D printer. Wish me luck.

[Matt Saeger]

Keeps posting updates! I would like to build one of these too. 

[Alan Biocca]

Nice start Daniel. 

When I found Nero's channel and started seeing more about Vorons I liked their community and design philosophy. Initially I thought I'd build a Switchwire CoreXZ, then decided that the 1.8 CoreXY would be a better choice for the better utilization of space in my compact print farm. I was briefly distracted by the Zero and 0.1 and considered getting a kit, but for me the 0.1 is just a bit too small at 120mm. At 150mm the Micro M would be a better choice. But I was already collecting parts for the 1.8-250 when the Trident came out which improved on some important design issues so I have switched my collecting to the 1.9/Trident. (If anyone wants to build a 1.8 I have the panel sets for it in the flea market pile). I've not been attracted to the 2.4 due to the extra complexity, but it has been very popular. I suspect the Trident will pass the 2.4 in popularity when a few kits are available due to the reduced price point and build effort. The 2.4 has some advantages in the largest sizes but at 250 not so much for me.

Best of luck on your 2.4 and if you need any support the Voron discord channels are excellent which you probably already know.

Alan w6akb

--
You received this message because you are subscribed to the Google Groups "3D Printing Tips and Tricks" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 3d-printing-tips--...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/3d-printing-tips--tricks/809b00f8-9fae-40b6-8a84-3c6315347240n%40googlegroups.com.

[Mark Steele]

You're going to love that printer when you're done. Mine just started printing two days ago and I'm thrilled. 

On Sat, Sep 18, 2021, 10:23 Daniel Rosen <dgros...@gmail.com> wrote:

There is an old saying that every man should plant a tree, have a child, write a book... and build his own 3D printer. Wish me luck.

--

You received this message because you are subscribed to the Google Groups "3D Printing Tips and Tricks" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 3d-printing-tips--...@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/3d-printing-tips--tricks/91e3d18c-5ddc-4159-bf09-f85c4d0e248en%40googlegroups.com.

[Alan Biocca]

Should have said Tiny-M, that's the 150 (or 190) mm not-official Voron variant. The 190 version uses Prusa Mini size print plates. The Micron is a 2.4 variant made with 0.1 parts at 120mm. Don't think there is a Micro-M, at least not yet. :)

[Daniel Rosen]

Will do! Thanks

Sent from my iPhone

On Sep 18, 2021, at 1:20 PM, Matt Saeger <msa...@gmail.com> wrote:

Keeps posting updates! I would like to build one of these too. 

On Saturday, September 18, 2021 at 9:23:18 AM UTC-5 dgros...@gmail.com wrote:

There is an old saying that every man should plant a tree, have a child, write a book... and build his own 3D printer. Wish me luck.

--
You received this message because you are subscribed to a topic in the Google Groups "3D Printing Tips and Tricks" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/3d-printing-tips--tricks/39d2m_6Kj4Q/unsubscribe.
To unsubscribe from this group and all its topics, send an email to 3d-printing-tips--...@googlegroups.com.

[Daniel Rosen]

But you are Bill Steel!!!. The God of 3D printing. I will be lucky if I don’t kill myself attempting to build this thing. 🤪

Sent from my iPhone

On Sep 18, 2021, at 2:46 PM, Mark Steele <mstee...@gmail.com> wrote:



You're going to love that printer when you're done. Mine just started printing two days ago and I'm thrilled. 

On Sat, Sep 18, 2021, 10:23 Daniel Rosen <dgros...@gmail.com> wrote:

There is an old saying that every man should plant a tree, have a child, write a book... and build his own 3D printer. Wish me luck.

<IMG_2058.JPG>

--
You received this message because you are subscribed to the Google Groups "3D Printing Tips and Tricks" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 3d-printing-tips--...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/3d-printing-tips--tricks/91e3d18c-5ddc-4159-bf09-f85c4d0e248en%40googlegroups.com.

<IMG_20210918_141329_01.jpg>

[Daniel Rosen]

Z BELT DRIVE & STEPPERS READY!

[Mark Steele]

Lol. I'm actually Mark Steele. 

To view this discussion on the web visit https://groups.google.com/d/msgid/3d-printing-tips--tricks/38a3dc63-1d73-480b-97c6-e4e0286f5e54n%40googlegroups.com.

[TobyCWood]

Bill is just this guy... you know?

[Daniel Rosen]

Oops. Sorry for the confusion 

Sent from my iPhone

On Sep 19, 2021, at 11:02 PM, TobyCWood <andyc...@gmail.com> wrote:

Bill is just this guy... you know?

You received this message because you are subscribed to a topic in the Google Groups "3D Printing Tips and Tricks" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/3d-printing-tips--tricks/39d2m_6Kj4Q/unsubscribe.
To unsubscribe from this group and all its topics, send an email to 3d-printing-tips--...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/3d-printing-tips--tricks/e896dc14-603b-4409-8ba2-7887ff5d9df9n%40googlegroups.com.

[Kurt at VRFX]

Wow - those look to be some Mighty Big Arse extrusions! And, the Color is REALLY Cool too!!!

Yeah - I know - I'm a little late to this party, just catching up on this thread now...

-K

On 9/18/2021 7:23 AM, Daniel Rosen wrote:

There is an old saying that every man should plant a tree, have a child, write a book... and build his own 3D printer. Wish me luck.

[Kurt at VRFX]

Yeah - somehow I didn't think Mark = Bill, but, William = Bill does!

To view this discussion on the web visit https://groups.google.com/d/msgid/3d-printing-tips--tricks/CA%2BbBinGziJwcBOg%3DwH9_YXzHOfcQwuJ99MG87-mzOozdTyzxQA%40mail.gmail.com.

[Daniel Rosen]

I am so bad with names. 😭

Sent from my iPhone

On Sep 20, 2021, at 9:19 AM, Kurt at VRFX <vr...@optonline.net> wrote:



Yeah - somehow I didn't think Mark = Bill, but, William = Bill does!

On 9/19/2021 10:29 AM, Mark Steele wrote:

Lol. I'm actually Mark Steele. 

On Sun, Sep 19, 2021, 13:25 Daniel Rosen <dgros...@gmail.com> wrote:

Z BELT DRIVE & STEPPERS READY!

<IMG_2062.JPG>

On Saturday, September 18, 2021 at 9:17:08 PM UTC-5 Daniel Rosen wrote:

But you are Bill Steel!!!. The God of 3D printing. I will be lucky if I don’t kill myself attempting to build this thing. 🤪

Sent from my iPhone

On Sep 18, 2021, at 2:46 PM, Mark Steele <mstee...@gmail.com> wrote:



You're going to love that printer when you're done. Mine just started printing two days ago and I'm thrilled. 

On Sat, Sep 18, 2021, 10:23 Daniel Rosen <dgros...@gmail.com> wrote:

There is an old saying that every man should plant a tree, have a child, write a book... and build his own 3D printer. Wish me luck.

<IMG_2058.JPG>

--
You received this message because you are subscribed to the Google Groups "3D Printing Tips and Tricks" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 3d-printing-tips--...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/3d-printing-tips--tricks/91e3d18c-5ddc-4159-bf09-f85c4d0e248en%40googlegroups.com.

<IMG_20210918_141329_01.jpg>

--
You received this message because you are subscribed to the Google Groups "3D Printing Tips and Tricks" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 3d-printing-tips--...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/3d-printing-tips--tricks/38a3dc63-1d73-480b-97c6-e4e0286f5e54n%40googlegroups.com.

--
You received this message because you are subscribed to the Google Groups "3D Printing Tips and Tricks" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 3d-printing-tips--...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/3d-printing-tips--tricks/CA%2BbBinGziJwcBOg%3DwH9_YXzHOfcQwuJ99MG87-mzOozdTyzxQA%40mail.gmail.com.

--
You received this message because you are subscribed to a topic in the Google Groups "3D Printing Tips and Tricks" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/3d-printing-tips--tricks/39d2m_6Kj4Q/unsubscribe.
To unsubscribe from this group and all its topics, send an email to 3d-printing-tips--...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/3d-printing-tips--tricks/5ef916d2-ed58-0852-efeb-d0a60f9b0206%40optonline.net.

[Kurt at VRFX]

Don't beat yourself up TOO Badly!

About 12 years ago, when I was teaching in NYC - I had 3 classes 1 semester, each like 17-20 students. If that wasn't bad enough - the one class had like 90% Asians - and some of their names were Crazy to pronounce - much less remember! So - yeah - been there - done that...

[markni...@gmail.com]

It's all very confusing, Clark Kent is actually "The Man of Steele"

[Mark Steele]

And I am literally the son of Steele

To view this discussion on the web visit https://groups.google.com/d/msgid/3d-printing-tips--tricks/192bfdca-5f3b-c3d3-f3b8-56cc6511c747%40optonline.net.

[Steve Peterson]

Great color.  I have a V2.4 the same color.  I'll watch here for any progress posts and will chime in if I can offer any help.

Steve

[Kurt at VRFX]

But - not the Man of Steel!

[Daniel Rosen]

Thanks all for the good ideas, help and words of encouragement. Three weeks in and I like how is coming together. Please let me know if you spot any major defects.

[Steve Peterson]

Looking good.  What filament/color did you use?  Printed yourself?

Steve

[Kurt at VRFX]

I also really like the Green aluminum extrusions - it makes for a Nice look to the 3DP!

-K

On 10/9/2021 7:59 PM, Steve Peterson wrote:

Looking good.  What filament/color did you use?  Printed yourself?

Steve

On Saturday, October 9, 2021 at 2:32:07 PM UTC-7 dgros...@gmail.com wrote:

Thanks all for the good ideas, help and words of encouragement. Three weeks in and I like how is coming together. Please let me know if you spot any major defects.

[Daniel Rosen]

Thanks Steve. I used Inland black and green filament from micro center. I am printing on my CR10s. I had to made several upgrades to the printer to get good quality. I built the ikea lack enclousure, upgraded the motherboard, and added support rods to the frame

Dan

[Daniel Rosen]

It has been a while since my last post. I think is coming out nice considering I can only work on it part time on weekends. Next step is to assemble the electronics