Fwd: list of DEs

[Anish Gupta]

Guys, please post your suggestions on the best way to come to a consensus.

---------- Forwarded message ----------
From: skohli <sko...@iitd.ac.in>
Date: Mon, Sep 24, 2012 at 9:02 PM
Subject: list of DEs
To: Abhinav <me10...@mech.iitd.ac.in>, Anish Gupta <me20...@mech.iitd.ac.in>, dhruvg...@gmail.com, Dhruv Gupta <me21...@mech.iitd.ac.in>, Alok Nath Yadav <me11...@mech.iitd.ac.in>


Dear Class Committee Coordinators,

Here is the list of electives that various groups are planning to offer. Please find out from your batches which courses can be in the same slot. The 2009 and 2010 class coordinators for ME1 and ME2 must sit together to decide the slots.  My suggestion is that you ask the students to identify only those courses which they are serious about doing. Do not ask for preferences, since in the list we have, all will get offered if there are takers for them.  Then find the courses, which may be put in the same slot. Please also note that not all the courses given below are DEs for the two programmes. SOme of the 700 level courses are DEs but not some others, which can be taken only as OCs. So, make sure you check these details from the courses of study for your entry year. Please let me have the information about slots latest by Wed FN (which means by tomorrow night!)

MEL 334, MEL 432, MEL 433, MEL 435, MEL 436, MEL 324, MEL 426
MEL 732, MEL 749, MEL 792, MEL 794, MEL 796, MEL 790, MEL 671, MEL 851, MEL 866, MEL 868



MEL345 Internal Combustion Engines 3-0-2  MRR
MEL341 Gas Dynamics and Propulsion 3-0-2  AG
MEL709 Heat Exchangers2 3-0-2 C PMVS
MEL716 Micro/ Nanoscale Heat Transfer 3-0-2 SJ


MEL736  Automotive Design       AC
MEL748  Tribological Systems Design     RKP
MEL314  Noise Engineering       AKD     SPS
MEL416  Robotics Engineering    SM

--

best
sangeeta

[sidharth]

anish please try to see micro nano and value engg are not in the same slot (E,F,J,or H suits every one i hope) so people left with 2 DEs will hav no problem as some dont want to take a DE in M slot as materials management will be in M  ......and avinash has to do opc and shrey mel120 so make sure it dont clash with these DEs ....you can try if mel120 and opc can go with same slot ...and shuvi can do 2 courses (mm, ve,) ....

[Avinash Anant]

+1

[Shuvi Shrivastava]

=)

On Mon, Sep 24, 2012 at 9:26 PM, Avinash Anant <avinasha...@gmail.com> wrote:

+1

[kashish arora]

+1

[Shubham Akshat]

plz try keeping MM out of M slot...

[Ankur Agrawal]

3 DEs to be done by me.. Plz ensure MM,LCA, Micro nano are in different slots..

[kashish arora]

^^^lol

[Chaitu Chill]

Try keeping Micro and Nano or MEL 432 in E, J or H slot and MM in M slot as in prev sems.  LCA will be C slot as usual.

[Anish Gupta]

https://docs.google.com/spreadsheet/ccc?key=0AoQrJhnTDpVvdFRTcDhRaHpBbTZtRjNaaW9VVkxHX3c

Please fill in your preferred slot for the DEs if you are interested in that particular DE, otherwise leave it blank. You can also append comments for your slot choice if there is a pressing reason for the same.

Do this before midnight, I'll be sending final preferences by midnight.

[Nalin Mittal]

yaar VJ ka supply chain management ka code ni pta mujhe. jo bhi hai use B slot main kr do