First steps with the BeagleBone PRU

Showing 1-2 of 2 messages
First steps with the BeagleBone PRU boxysean 8/12/12 1:59 PM
Hey folks,

Wanted to let you know I wrote a post about my first steps with the BeagleBone PRU. Feedback appreciated!

http://blog.boxysean.com/2012/08/12/first-steps-with-the-beaglebone-pru/

Thanks to Lyren Brown for posting his PRU LED blink code up here awhile back, made my life a lot easier.

Sean
Re: [beagleboard] First steps with the BeagleBone PRU Jason Kridner 8/12/12 3:24 PM
Great write-up and demo!

I'm not familiar with DMX, but I would like to point you to RPMsg and
virtio [1]. From what I understand from the Linux hackers around me,
it would likely be the best architecture for communicating between the
processors and the driver should be rewritten to use it. Don't want to
slow you down, but if you are still looking at the architecture of the
communication, consider it.

[1] http://omappedia.org/wiki/Category:RPMsg

Second, it would be interesting to create a firmware image that
allowed you to do Arduino-like things.  [2] is what I've seen.

[2] https://github.com/ecto/duino/