Google Groups

Re: [OMG] Bridge Competition Rules

ejk00 Apr 4, 2012 5:32 PM
Posted in group: Omaha Maker Group
Count me in. 

Sent from Eric's iPhone

On Apr 4, 2012, at 7:10 PM, Kevin Fusselman <> wrote:

I did some price research on balsa, and it looks like Hobby Lobby carries it fairly reasonably, though it still costs over twice what you can order it for (before shipping)...

If anyone is interested in splitting shipping, let me know by Monday, as I'll be ordering the first part of next week.

On Wed, Apr 4, 2012 at 4:33 PM, Luke <> wrote:
Thinking about it


On Apr 4, 2012, at 3:54 PM, Kevin Fusselman <> wrote:

Are you volunteering? :)

On Wed, Apr 4, 2012 at 2:52 PM, Luke Dub <> wrote:
i'm thinking a linear increasing load source with a load-cell that holds the max load value on a digital readout would be cool.

On Wed, Apr 4, 2012 at 12:03 PM, Eric Kaplan <> wrote:
Just for grins, here are some resources:

Blick also offers a kit of supplies for (24) bridges for classroom education.  Although this level does not include material for the road decking of the bridge, it might be a good value if several folks wanted to split the package - $70

On Wed, Apr 4, 2012 at 11:26 AM, David Knaack <> wrote:
Below are the rules for the Bridge Competition.

Please ask if you would like clarification of the intent of the rules. 

The general idea is that it needs to function as a bridge for a toy car, allowing the toy to cleanly traverse the entire length of the bridge, with a realistic maximum allowable grade.

If you plan to use a really exotic construction method, plan on providing detailed documentation or demonstrating the method.



May contain only balsa wood and Titebond 2 wood glue.

Must fit within a 50 x 20 x 10 cm rectangular volume.

May not contain more than 6oz of glue by wet volume.

Must have a smoothish road deck no less than 6cm in width.
 - suitable for a HotWheels-style car to easily roll over

Deck ends must contact the upper surface of the test rig support planks.

Deck must have no more than a 10% grade (where grade = 100 * (rise/run))

Deck must accommodate the load plate.

Some part of the load plate must fall across the midpoint of the span.

There are no limits on construction tools or technique.


The load plate is 10 x 5 x 1 cm, and has a loading hook extending from the center of the bottom surface which requires 1 cm annular clearance through and below the bridge deck.

Bridges will be loaded progressively (w/ minimum shock load), starting at 5kg and progressing in 1Kg increments to 10Kg.

Upon reaching the maximum load, the bridge must hold for 1 minute.
 - Disputes as to whether a bridge 'held' will be resolved by vote

Bridges that fail will be ranked by the weight carried without failure and bridge mass.

Bridges that do not fail will be ranked by the mass of the bridge.


The open span between the support planks is 30cm.

The open span is between rectangular, fixed, smooth, level, coplanar planks with a thickness of ~2cm.

The bridge may touch the top or inner surfaces of the supporting planks, but may not touch any other surface, nor be affixed to any surface.

The load plate will support a wire or rod from which the test load will be suspended.


Eric J. Kaplan